Using the Oven –Manual Mode
Turn On –Press On/Off button. Temperature
Display will show preset temperature, 150.
Set Temperature using the temperature
adjustment knob (plus or minus)
Press Act Temp button to check actual oven
temperature during pre-heat or cooking –actual
temperature will display briefly on display
before reverting to the pre-set temperature.
At any time during cooking, time and
temperature can be adjusted using the ‘Time’
‘Temperature’ controls.
Time Display –will show actual time set.
Set Time using time adjustment control knob
(plus or minus).
When set temperature is reached, press
‘Start/Stop’ button to begin cook time
countdown
The oven can be used without using the ‘Timer’
as it does not control the cooking operation.
If the ‘Timer’ is set to the ‘Infinity’ setting (InF)
the timer will count elapsed time to 999.
Opening the oven door will pause the cooking
time, to continue cooking, close the door.
Press any button to cancel Alarm.
Press ‘Grill/Broil’ button to select grill/broil.
Press ‘Act Temp’ button to check temp.
Press ‘Light’ button to turn on oven light.
Press & hold ‘On/Off’ button for 3 seconds to
turn off oven.
‘Grill/Broil’ function can be selected at any
time during the manual mode by pressing the
button, the ‘Grill/Broil’ LED will illuminate.
The timer display will show either (grl) or (brl).
On completion of the Grill/Broil mode, the oven
temperature will return to the previous setting.
Cooking in Programme Mode
Turn On –Press On/Off button.
Temperature Display will show actual temperature.
Press ‘Programme’ button
Select a Programme –using the temperature
adjustment knob, scroll through the programmes.
Time display will show Pre Heating (PrE)
programme cannot be started until pre-heating is
completed.
Load oven when time display shows ‘Ready’ (rdY)
Start Programme –Press ‘Start/Stop’ button to
start cooking programme.
Press Act Temp button to check actual oven
temperature during pre-heat or cooking –actual
temperature will display briefly on display before
reverting to the pre-set temperature.
When cooking in ‘programme’ mode, the oven
light will remain ON until cooking is completed.
Opening the oven door will pause the cooking
time, to continue cooking, close the door.
Setting the Oven Programmes
Oven can be programmed with up to 20
programmes. To set the programmes, carry out the
following for each programme:-
Enter Programming Mode –press ‘Programmes’
button to enter programming mode.
Select Programme Required –rotate temperature
adjustment knob to programme required.
Temperature display will show program selected.
Press & hold ‘Act Temp’ button until ‘Time’ &
‘Temperature’ displays and ‘Temperature’ button
LED flashes.
Enter Cook Temperature –Rotate temperature
adjustment knob to set cook temperature
(plus/minus). Temperature display will show
temperature selected.
Enter Cook Time –Rotate timer control knob to
set cook time (plus/minus). Time display will
show Time selected.
‘Time’ & ‘Temperature’ displays and
‘Temperature’ buttons LED will flash.
Press ‘Act Temp’ button to confirm Time
& Temperature settings.
Cleaning
Switch off and unplug the unit.
Do not use sharp objects, metal scrapers, wire
brushes or wire wool pads as they can scratch the
steel.
Do not use bleach or any corrosive detergent as
they will damage the surface of the unit.
Do not allow corrosive foodstuffs such as fruit
juices, vinegar, mustards, pickles, etc., to remain
on stainless steel for long periods. Wash and
rinse away.
After cleaning with a mild detergent, always
remove any residue with a damp cloth and wipe
dry.
ANY PROBLEMS
Contact: Event Furniture Ltd. 01922 628961
Event Furniture Limited,
Unit2, Maple Leaf Industrial Estate,
Bloxwich Lane, Walsall,
West Midlands, WS2 8TF
