EVE 10ECA4101 Manuale utente
Getting Started .........................................................................................................................................4
Erste Schritte ........................................................................................................................................................30
Prise en main ........................................................................................................................................................56
DE
EN
FR
www.evehome.com/global
3
DE
EN
FR
Meet Eve Outdoor Cam
Mounting Plate (1)
Wall Anchors / Screws
Allen KeyConnection Terminals
Mounting Bracket (2)
Mounting Cover (3)
Moisture Outlet Tilt Adjustment
Ingress
Seal (8)
Ingress Seal
Bracket (7)
Mounting
Ring (4)
Mounting Clip (5)
Flood Light /
Night Vision Light
Status LED
Wide-angle camera
Brightness Sensor
Mounting
Screw (6)
Cable Inlet
Reset
Metal Bracket
Motion Sensor
Microphone / Speaker
54
DE
EN
FR
DE
EN
FR
Get started
View the installation video at www.evehome.com/outdoorcam-installation
Choose a location
Eve Outdoor Cam is best installed replacing an existing outdoor light. An installation height of
2.5 m / 8 ft and a tilt angle of 30° is ideal, however you can easily adapt Eve Outdoor Cam to
your needs thanks to the three-axis camera angle adjustment.
If you are unsure or uncomfortable about installing Eve Outdoor Cam, consult a
qualified electrician. To be installed and/or used in accordance with appropriate
electrical codes and regulations.
2.5 m / 8 ft 100 - 240 V~
Please respect local laws regarding the filming of public spaces.
2.5 m / 8 ft
76
DE
EN
FR
DE
EN
FR
Get started
Check Wi-Fi coverage
Outdoor install locations often oer challenging conditions for Wi-Fi reception. Before you
proceed with the installation of Eve Outdoor Cam, ensure that Wi-Fi coverage is sucient at
the desired location.
Eve Outdoor Cam connects exclusively to 2.4 GHz Wi-Fi networks for greater range and
reliability. To check coverage using your iPhone, make sure it is connected to a 2.4 GHz Wi-Fi
network. You may need to temporarily disable the 5 GHz network of your router.
Hold your iPhone close to the wall at the location you want to install Eve Outdoor Cam. Wait
for at least 10 seconds and check the Wi-Fi signal on your iPhone. You should have at least two
bars of reception.
If your Wi-Fi signal does not reach the desired location, you may try to move your Wi-Fi access
point closer, use a Wi-Fi repeater or an additional mesh node, or choose a dierent location for
Eve Outdoor Cam.
In your fuse box, switch o the fuse connected to your existing outdoor light. Switch the
associated light switch on and o to make sure that there is no current flowing.
Disconnect power
CAUTION - Risk of electric shock!
2.4 GHz
98
DE
EN
FR
DE
EN
FR
Install the Mounting Plate
Disassemble and remove your existing outdoor light. Position the mounting plate (1) and remove
one of the plastic clips to create an opening for passing the power cable through. Ensure the UP
arrow is pointing upwards and trace the screw holes. Remove the mounting plate (1), drill into
your tracings and insert the supplied wall anchors.
Place the mounting bracket (2) on top of the mounting plate (1) and secure them using
the supplied screws.
Installation
Eve Outdoor Cam requires both a neutral wire and a connection to a ground wire. If
these are not present, Eve Outdoor Cam is not compatible at this location.
You may also use the wall anchors from your existing outdoor light if they’re spaced
as required. In this case, please ensure that the UP arrow is pointed upwards, or
horizontally to the left or right.
1
1110
DE
EN
FR
DE
EN
FR
Place the mounting clip (5) along with the metal bracket in the recessed area of the mounting
cover (3) and snap in the mounting clip (5). Turn the supplied mounting screw (6) clockwise to
attach Eve Outdoor Cam.
Mount Eve Outdoor Cam
Place the mounting cover (3) on top of the mounting bracket (2) with the cable inlet at the top.
2
Please ensure you keep holding Eve Outdoor Cam until the screw is suciently
fastened. You don’t need to fasten the screw all the way, and don’t need to use the
supplied allen key just yet – simply use your fingers.
Place the mounting ring (4) with the moisture outlet facing downwards and secure it
by twisting it to the left.
1312
DE
EN
FR
DE
EN
FR
Connect Eve Outdoor Cam
Pass the cable through the cable inlet.
3
Secure the ingress seal (8) with the ingress
seal bracket (7).
Pass the cable of Eve Outdoor Cam through
the wall mount so that the ingress seal sits
flush with the mounting cover (3).
Turn Eve Outdoor Cam upside down and open
the mounting ring (5) again by twisting it to
the right and pulling it towards you for easy
access to the cabling.
1514
DE
EN
FR
DE
EN
FR
Connect the corresponding wires from your power cable to Eve Outdoor Cam using the supplied
connection terminals.
Turn Eve Outdoor Cam back to the original
position and stow the terminals and cables in
the wall mount.
Secure the mounting ring (5) again by
pushing it towards the wall and twisting it
to the left. Please ensure the moisture outlet
continues to face downwards.
Eve Outdoor Cam requires both a neutral wire and a connection to a ground wire.
If these are not present, Eve Outdoor Cam is not compatible at this location.
PE
L
L
N
1716
DE
EN
FR
DE
EN
FR
Eve
Download the Eve app from the App Store.
Open the Eve app and tap Add Accessories. Eve will now guide you through the setup process.
If you have already set up another accessory, go to the Eve settings to add Eve Outdoor Cam to your
home.
To add Eve Outdoor Cam, use the HomeKit code on the back of this manual.
Set up Eve Outdoor Cam
Align Eve Outdoor Cam and fully secure it
using the supplied allen screw.
4
Switch the fuse in your fuse box back on.
The status LED should now turn on.
1918
DE
EN
FR
DE
EN
FR
Questo manuale è adatto per i seguenti modelli
3
Indice
Lingue:
Altri manuali EVE Telecamera di sicurezza
