
Caution | Settings
www.everdeskplus.com
WARNING! Failure to follow these instructions may result in serious injury.
Ensure no obstacles are in the desk’s path. Ensure the desktop is not touching any walls.
Ensure all cords are an appropriate length to accommodate the changes in height.
This height adjustable desk has electric motors and is designed for use in dry work areas only. The desk height is adjustable so that it can be
positioned at the most ergonomically suitable height. Any other use comes at the user’s risk. Under no circumstances will EverDesk+ accept
warranty claims or liability claims for damages caused from improper use or handling of the desk frame.
Keep Children away from electric height-adjustable desks, control units and handsets.
There is a risk of injury and electric shock.
Do not sit or stand on the desk frame. Do not crawl or lie under the desk frame.
Do not place any objects taller than 50cm underneath the desk.
Keep liquids away from all electrical components.
Do not open or dismantle any of the components - the Legs, Control Box, or Switch.
There is a risk of electric shock.
This product is designed with a duty cycle of 10% (2 minutes on, 18 minutes off).
i i
In the event of a power outage or if the power cords is unplugged,
a manual reset may be necessary.
i i
Health Coach Controller Troubleshooting
Ensure that the desk it at its lowest height before attempting to reset.
• Turn the controller anti-clockwise
(DOWN position) and hold until the
display reads “RESET”, then release the
controller.
• Press and hold the “1” button while the
display flashes “RESET” and then
switches to either:
10.1 ( = One Touch)
10.2 ( = Constant touch)
• Press the “1” button again until desired
setting is reached. Once the chosen
setting is displayed, release the button
and wait about 5 seconds for the
display to return to “RESET”.
• Finish the reset process by turning the
controller anti-clockwise and holding it
until the desk lowers further, slightly
rises and stops.
The new touch settings will have been
saved - the desk is now ready to use.
Touch Settings
• Turn the controller anti-clockwise (DOWN
position) and hold until the display reads
“RESET”, then release the controller.
• Press and hold the “2” button while the
display flashes “RESET” and then
switches to either:
10.3 ( = CM)
10.4 ( = Inches)
• Press the “2” button again until desired
setting is reached. Once the chosen
setting is displayed, release the button
and wait about 5 seconds for the display
to return to “RESET”.
• Finish the reset process by turning the
controller anti-clockwise and holding it
until the desk lowers further, slightly rises
and stops.
The new unit settings will have been saved
- the desk is now ready to use.
Changing Measurement Units (CM/Inch)
• Enter Reset Mode: Turn the controller
anti-clockwise (DOWN position) and hold
until the display reads “RESET”, then
release the controller.
• Finish Reset: Turn and hold the DOWN
position again until the desk lowers itself
to the minimum height, slightly rises and
stops.
The desk will have been reset.
Reset Health Coach
Health Coach
User Guide
Please scan the QR
code to view all the
features and
recommended
uses of our Health
Coach Controller.
• Turn the controller anti-clockwise (DOWN position) and hold until the display reads “RESET”, then release the controller.
• Press and hold the EverDesk+ Logo for about 5 seconds until the minimum height is displayed.
• Turn the controller anti-clockwise or clockwise to decrease or increase the height value respectively.
• Finish the reset process by turning the controller anti-clockwise and holding it until the desk lowers further, slightly rises and stops.
The new height value is saved and the desk is ready to use.
Manually Change Displayed Height Value