Everet EVP412 Manuale utente
EVERET EVP412
12x FHD PTZ Video Camera
User Manual
Version V1.0
（English)
1WWW.EVERETIMAGING.COM
CONTENT
SAFETY GUIDES 1
PACKING LIST 2
Qucik Start Guide 3
Dial Switch Settings (at the bottom of the camera) 4
PRODUCT HIGHLIGHTS 6
TECHNICAL SPECIFICATIONS 7
CAMERA INTERFACE 9
CAMERA DIMENSIONS 9
IR REMOTE CONTROLLER 10
OSD MENU 13
Webinterface 23
VISCA OVER IP 35
HOW TO USE VISCA OVER IP 35
SAFETY GUIDES
1. Before operation, please fully read and follow all instructions in the manual.
2. The camera power input range is 100-240 VAC (50-60Hz), ensure the power supply input
within this rate before powering on.
3. The camera power voltage is DC12V/8W. We suggest you use it with the original power
supply adapter or use PoE+ (IEEE802.3at) compatible switch.
4. Please keep the power cable, video cable and control cable in a safe place. Protect all
cables especially the connectors.
5. Operational environment: 0℃-50℃, humidity less than 90%.To avoid any danger, do not
put anything inside the camera, and keep away from the corrosive liquid.
6. Avoid stress, vibration and damp during transportation, storage and installation.
7. Do not detatch the camera housing and cover. For any service, please contact authorized
Everet technicians.
8. Video cable and control cable should be individually shielded, and cannot be substituted
with other cables.
9. Do not direct the camera lens towards strong light, such as the sun or the intensive light.
2WWW.EVERETIMAGING.COM
10. Use a dry and soft cloth to clean the camera housing. Applied with neutral cleaning agent
when there is need to clean. To avoid damage on the camera lens, never use strong or
abrasive cleaning agents on the camera housing.
11. Do not move the camera by holding the camera head. To avoid mechanical trouble, do
not rotate the camera head by hand.
NEVER MOVE THE CAMERA MANUALLY WHEN IT IS WORKING.
12. Put the camera on fixed and smooth desk or platform, avoid leaned installation.
13. Power Supply Polarity (Drawing)
Note:
The video quality may be affected by the specific frequencies of electromagnetic fields.
Never grasp the head of the camera, and never move the camera by hand when it is working,
otherwise the camera will breakdown.
PACKING LIST
Check all bellow items when open the package:
Camera
1
Power Adapter
1
Power Cable
1
RS232 Control Cable
1
USB 3.0 Cable
1
Remote Controller
1
3WWW.EVERETIMAGING.COM
Qucik Start Guide
1. Check if following products are in the box
- Camera
- DC12V input
- Power supply cable
- RS232 Cable
- USB 3.0 Cable
- IR Remote Control
2. Power on the camera with the 12V adapter or use a POE+ switch.
PoE+ switch requirements:
(PoE+ IEEE 802.3af/at compliant with total power of 126W up to 30W per port)
Recommended unmanaged PoE+ network switches:
- TP link TL-SG1008MP 8-port
- Netgear GS16PP 16-port
3. Check if you get video output from HDMI or SDI on a display.
NOTE: The default resolution of the camera is 1080P30. If your display does not
support this resolution you can easily change the resolution with the IR remote
control. Please go to chapter: IR Remote Controller in this manual and follow
instructions ‘Change video output Resolution for SDI, HDMI and USB 3.0‘ on how to do
this.
4. Check if you can Pan and Tilt the camera wit the IR remote controller.
NOTE: if you cannot pan or tilt the camera. Please go to chapter: IR Remote Controller
in this manual and follow instructions ‘SET Camera 1-4’ on how to do this.
5. Please check the default camera IP address (192.168.1.188) for operation in your
network or simply change IP address in OSD menu settings using IR remote controller.
Please go to chapter: ‘OSD Menu’ and follow instructions ‘Change IP address’ to see
how to do this
4WWW.EVERETIMAGING.COM
Dial Switch Settings (at the bottom of the camera)
Dial Switch（ARM）
SW-1
SW-2
Instruction
1
OFF
OFF
Updating mode
2
ON
OFF
Debugging mode
3
OFF
ON
Undefined
4
ON
ON
Working mode
5WWW.EVERETIMAGING.COM
Dial Switch
SW-3
SW-4
Instruction
1
OFF
OFF
reserve
2
ON
OFF
reserve
3
OFF
ON
reserve
4
ON
ON
reserve
Dial Switch (USB)
SW-5
SW-6
Instruction
1
OFF
OFF
Undefined
2
ON
OFF
Working mode
3
OFF
ON
Updating mode
4
ON
ON
Undefined
6WWW.EVERETIMAGING.COM
PRODUCT HIGHLIGHTS
•Advanced ISP, 1/2.5 inch 8MP Sony sensor, providing 3840x2160 p30
•Ultra HD video resolution
•4K wide angle optical lens: 12x optical zoom and 2x digital zoom , with 72.5 degree
field of view;
•4K video over IP, H.264, H.265 encoding;
•IP, HDMI, 3G-SDI, USB video outputs interface
•3G-SDI compatible with Blackmagic Design SDI Level-B
•White Balance, Exposure, Focus, Iris can be adjusted automatically or manually
•Support POE: easy to use one RJ45 cable to get video, control and power supply
•Special Focusing Algorithm: fast and precise focusing performance when zooming or
moving
•Smooth PTZ mechanical design, accurate pan tilt motor control
•128 presets supported
•Standard Sony VISCA, VISCA over IP, PELCO-P, PELCO-D control protocol; IP VISCA
over both TCP and UDP
•Daisy chain supported, max 7 cameras connected in VISCA protocol
•Image flip function, support upside-down installation
•Supplied with functional IR remote controller
•Fast video format switch: less than 3 seconds
•Supported field upgrade for ISP, ARM, FPGA and USB
•USB3.0 port compatible with USB2.0 output.
•Support RS232/RS485/UVC control
•Standard UVC1.5 protocol, seamlessly compatible with major video conferencing
software and platform
•Support IR transfer function, code of the third party remote controller can be
transferred to the host via VISCA IN port, in case client’s development
•OSD menu in English, IP address, streaming resolution and size can be set in OSD
menu
7WWW.EVERETIMAGING.COM
TECHNICAL SPECIFICATIONS
Video Format
HDMI
(v1.4)
3840*2160P30/25
1920*1080P60/50/30/25/59.94/29.97/24
1920*1080I60/50/59.94
1280*720P60/50/30/25/59.94/29.97
SDI
1920*1080P60/50/30/25/59.94/29.97/24
1920*1080I60/50/59.94
1280*720P60/50/30/25/59.94/29.97
IP
Main Stream:
1920*1080@3~30, 1280*720@3~30, 1024*576@3~30;
640*360@3~30
Sub Stream:
1280*720@3~30, 1024*576@3~30, 640*360@3~30.
USB 3.0
1920*1080P60/50/30/25
1280*720P60/50/30
1280*720P25
1024*576P30
960*540P30
640*360P30
352*288P30
Video Interface
HDMI (V1.4), 3G-SDI, USB 3.0, RJ45
Sensor
1/2.8” 8MP Sony CMOS sensor
Zoom
f 3.92～47.32mm(12X), F1.8- 2.8, View Angle: 72.5°(Far)-6.3°(Near)
Rotation Angle
Pan: -170° ~ +170°; Tilt: -30° ~ +90°
Rotation Speed
Pan: 0°~120°/s ; Tilt: 0°~80°/s
Preset:
Remote controller: 10; RS232: 128; Accuracy: 0.1°
Control Port
RS232, RS485, RJ45 VISCA over IP, USB3.0 (UVC1.5), USB2.0
(UVC1.1)
Network Speed
1000M
Video encode
H.264/H.265(default: H.264)
8WWW.EVERETIMAGING.COM
Bit Rate Control
Variable Bit Rate, Constant Bit Rate
Video Bit Rate
1024Kbps~16384Kbps
IP Protocol
TCP/IP, HTTP, RTSP, DHCP ,RTMP, Onvif(2.4),
Visca over IP(TCP&UDP), HTML5, Visca, Pelco P, Pelco D
POE
Supported
Daisy Chain
Support RS232 serial daisy chain
Minimum Lux
0.1 lux
White Balance
Auto/Indoor/Outdoor/Manual/One Push/ATW
Exposure
Auto/Manual/Shutter Priority /Iris Priority/Bright
Focus
Auto / Manual
Iris
Auto / Manual
Electric Shutter
Auto / Manual
Gamma
Supported
WDR
Supported
BLC
Supported
2D/ 3D Noise
Reduction
Supported
Anti Flicker
OFF/50Hz/60Hz
Pan Tilt Flip
Supported
Input Voltage
DC12V/12W PoE+ recommended (IEEE802.3at)
Dimension
220mm×190mm×173mm
Net Weight
1.5KG
9WWW.EVERETIMAGING.COM
CAMERA INTERFACE
1.Camera Lens
2.Camera Base
3.IR Receiver Panel
4.Power Indicator Light
5.Dial Switch
6. Tripod Screw Hole
7. Installation Hole
8. RS232 control port (input)
9. RS232 control port(output)
10. HDMI port
11. 3G-SDI port
12. USB 3.0
13. RJ45 port (IP&NDI)
14. DC12V plug
CAMERA DIMENSIONS
Altri manuali per EVP412
1
Indice
Altri manuali Everet Telecamera di sicurezza
