EverFocus ECOR264-4F1 Manuale utente

User Manual

-4

-8

1.4 FRONT PANEL

Your primary interaction with your new DVR will be through the Front Panel buttons and their

corresponding buttons on the included Remote Control. Take a moment to learn where the keys are as the

remainder of the manual will refer to them often.

Figure 1-1 Front Panel

1) IR Receiver: Receiver for IR remote control

2) Live: Press this key to show live view. Press to exit from playback mode.

3) View: Press this key to switch between 4x, PiP (Picture In Picture), and full screen and

9x. Examples of four different views are listed below:

4x PiP Full screen 9x

Note1: PIP display is not available in playback mode.

Note2: 9-screen display available in 8 Channel model only



4) SEQ: Press this key to enter the auto sequential switching mode. The sequence dwell

time can be set in “Display Setting” tab of the Menu. For more detail about SEQ,

please see “Section 4.8.2 Display Setting-Main M/T SEQ”.

5) SEARCH: Press this key to enter Search Menu. For more detail about the Search function,

please see “Section 3.12 Search ”.

6) ◄◄/◄I: Fast reverse playback or step reverse playback depending on playback mode.

7) ◄/ I I: Reverse playback or pause

8) ►/ I I: Forward playback or pause

9) ►►/I►: Fast Forward playback or step forward playback depending on playback mode.

10) DVD+RW: DVD+RW burner (D models only)

11) POWER LED: This LED ON indicates Power on.

12) ALARM LED: This LED ON indicates Alarm active.

13) HDD LED: This LED ON indicates HDD active.

14) Net LED: This LED ON indicates Network active.

15~18) Channel keys 1~4 (1~8): Press channel key (CH1~CH4) / (CH1~CH8) to display that channel in

full screen view.

19) MENU: Press this key to enter/exit MAIN SETUP MENU.

20) COPY: Press this key to enter Copy Menu. For more detail about Copy function, please

see “Section 3.13Copy”.

21) ENTER/ ARROW keys: Instead of or in combination with a mouse, you can use these keys to

change the Menu settings.

22) USB 2.0 port: For connecting USB-Flash-Drive to copy/archive video or for firmware upgrades.

2MOUSE AND FRONT PANEL OPERATION

ECOR264-4/ECOR264-8 DVRs support multiple sources to control the DVR. It can be controlled with a

mouse, the front panel, an EKB500, and the handheld remote control.

This chapter will cover the basic operation using the mouse and the front panel buttons.

2.1 GENERAL USB MOUSE OPERATION

2.1.1 How to select a channel / Enable audio

1. In a view consisting of more than one channel, users can select a channel by clicking once on the

desired channel screen. The selected screen will be highlighted by a white frame.

2. Double clicking on a channel screen will display full screen for this channel.

3. To enable audio out, click the audio icon (ex: ) at lower side of the screen. This system has only

one audio out. Click this button to enable or disable the audio-out mode.

2.1.2 OSD Root Menu

1. Right-click the mouse to obtain the DVR control bar (see Figure 2-1 OSD Root Menu ). When you move

the mouse over each icon, its title will be displayed at the top of the control bar.

Figure 2-1 OSD Root Menu

2. Click on any icon to perform that action. These actions are covered in detail in Chapter 3.

3. Click the “X” in the top-right corner to close the DVR control bar.

2.1.3 Operation in the Configuration Menus

Chapter

Click on the icon to access the Configuration Menu.

The Configuration menu screens (shown in Figure 2-2 OSD Menu) are divided into 3 main sections.

Figure 2-2 OSD Menu



1 In section 1, there are ten setup options available. Move the mouse over an icon and click to select it.



2 In section 2, the categories for the selected icon will be displayed. Click on a choice to select it.



3 In section 3, all the options for the selected choice will be available. Click on a field to make changes.

2.1.4 Field Input Options

The following are examples of different types of fields available in the Configuration menu.

Textbox: Click on the box and an on-screen keyboard will appear*. (see

note about the on-screen keyboard below)

Dropdown box: Click on the down arrow to see all selections, then

directly click on an option to select it.

Check box: Click on the box to enable it (checked) or disable it (unchecked).

Button: Click the button to execute the function.



Bar: Click and hold on the bar to adjust the set point Left or Right.

* Note about on-screen keyboard:

Click on a button to input that character.

The buttons on the right and bottom have the following functions:

Delete Delete the letter

Done Confirm the selection

All Caps Switch to capital letters

Space Enter a space

← Move to left

→ Move to right

Cancel Cancel and exit from the keyboard

2.2 General Front Panel Operation

2.2.1 How to select a channel / Enable audio

1. In a view consisting of more than one channel, use the mouse or press arrow keys

(Up/Down/Right/Left) to scroll through each channel that is displayed. The selected channel will be

highlighted by white frame. Pressing the “right” arrow when the last camera (4 or 8) is highlighted will

select all cameras.

2. While channel #1 is selected, press the “Enter” button to turn Audio On/ Off.

2.2.2 OSD Root Menu

1. Press “Menu” key to display the DVR control bar. Use the left/right arrows to scroll over each icon. The

title for each icon will be displayed on top of the control bar.

2. Press “Enter” key on any icon to perform that action. These actions are covered in detail in Chapter 3

3. Press “Menu” to close the DVR control bar.

2.2.3 Front Panel Key Review

The basic principle of front panel operation is to use arrow keys to navigate among the menu items. Use

the “Enter” key to confirm a selection or enter the next level menu. Press the “Menu” key to enter the Main

Menu or exit from the current level of the menu.

2.2.4 Operation in Configuration Menu

Press “Menu”, use the arrow keys to highlight the “Configuration” icon, and press “Enter” with

“Configuration” icon highlighted to bring up the Configuration menu.

NOTE: If the require password option is active, you will need to log in first. Refer to “Section 3.2 LOGIN” for

information on logging in. The menu (shown in

Figure 2-3 OSD Menu

) is divided into 3 main sections.

Figure 2-3 OSD Menu



1 In section 1, there are ten setup options available. Use arrow keys to highlight an icon and press “Enter”

to select it.



2 In section 2, the main choices for the selected icon will be displayed. Use Up/Down arrow keys to

highlight a choice and press “Enter” to select it.



3 In section 3, all the options for the selected choice will be available here. Use arrow keys to move

between items and press “Enter” to make changes.

Note: press “Menu” button to go back to the previous menu section.

2.2.5 Field Input Options

Textbox: Press Enter key and an on-screen keyboard will appear*. (see

note about on-screen keyboard below)

Dropdown box: Press “Enter” key to show the available options. Use

arrow keys to highlight the desired option and press “Enter” again to select it.

Check box: Press “Enter” key on a setting to enable it (checked) or disable it (unchecked).

Button: Press “Enter” key to execute the function.



Bar: Press “Enter” key to activate the slider, then use arrow keys to adjust the setting.

Press “Enter” again to finalize the changes.

* Note about on-screen keyboard:

Click on a button to input that character.

The buttons on the right and bottom have the following functions:

Delete Delete the letter

Done Confirm the selection

All Caps Switch to capital letters

Space Enter a space

← Move to left

→ Move to right

Cancel Cancel and exit from the keyboard

3. GENERAL DVR OPERATIONS

This chapter introduces the operations on major functions including playback, layout change, sequence,

triplex operations, copy, and search.

3.1 RECORD

By default, the DVR will always be in record mode. When the DVR is turned on, it will start to record. The

exceptions are:

1. DVR will not record any uninstalled cameras (Refer to Section 4.3.1 for more details)

2. If a schedule is active, the DVR will follow the record settings of the schedule.

3.2 LOGIN

In order to access ECOR264-4/ECOR264-8 options, users may be asked to log in for authority

identification. To log in, follow these steps.

1. Right click on the screen or press the Menu Key to display the Main Menu

2. Choose or click (or press “Enter” key) on the Configuration icon to bring up the following screen:

Figure 3-1 Login page

3. Select the user name from the drop-down list and input the password. The defaults are:

User name: admin (lower case)

Password: 11111111

+ To input password by mouse: click the password field to bring up the on-screen keyboard (see Figure 3-2

On-screen Keyboard). Click on each button to input the desired characters for the password. When finished,

click “Done” on the on-screen keyboard to confirm the password.

Chapter

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali EverFocus Registratore digitale

EverFocus

EverFocus EDR-1610A Guida

EverFocus

EverFocus EMV1200 FHD Manuale utente

EverFocus

EverFocus Paragon 264 Series Manuale utente

EverFocus

EverFocus 410M Manuale utente

EverFocus

EverFocus Paragon960 Manuale utente

EverFocus

EverFocus TUTIS-16F3 Manuale utente

EverFocus

EverFocus ECOR264-D2 DVR Series Manuale utente

EverFocus

EverFocus ECOR264 Manuale utente

EverFocus

EverFocus ECOR960 4F2 Manuale utente

EverFocus

EverFocus PowerPlex EDR-920 Guida

EverFocus

EverFocus ECOR4D Manuale utente

EverFocus

EverFocus ECOR Series Manuale utente

EverFocus

EverFocus ELR-4 Manuale utente

EverFocus

EverFocus ECOR Series Manuale utente

EverFocus

EverFocus EMV1200 FHD Manuale utente

EverFocus

EverFocus NDVR Manuale utente

EverFocus

EverFocus PARAGON Series Manuale utente

EverFocus

EverFocus EDR410M Manuale utente

EverFocus

EverFocus Paragon264 X4 32CH Manuale utente

EverFocus

EverFocus ECOR264x1 series Manuale utente

EverFocus

EverFocus EMV1200 HD Manuale utente

EverFocus

EverFocus EPHD08 Manuale utente

EverFocus

EverFocus EPHD04+ HDcctv Manuale utente

EverFocus

EverFocus ECOR 264x1-16 Manuale utente

Manuali Registratore digitale popolari di altre marche

FLIR

FLIR M3100E Series Manuale utente

VTRACKPRO

VTRACKPRO FPRO300 Manuale utente

Swann

Swann NVR-7085 models Manuale utente

XtendLan

XtendLan DVR-1670C Manuale utente

urmet domus

urmet domus 1093/004AHD Manuale utente

Holux

Holux M1 Manuale utente

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuale utente

Whistler

Whistler D16VRS Manuale utente

Defender Security

Defender Security 82-20235 Manuale utente

MISUMI

MISUMI MP-WF100M Manuale utente

Speco

Speco D8HU Manuale utente

UST

UST DDR-E04AA Istruzioni per l’uso

Consolidated

Consolidated Digital Video Recorder Manuale utente

Mace

Mace DVR0404RW Guida rapida

RCA

RCA RTD315W Manuale utente

FSM

FSM Colibri Grande PRO Manuale utente

Hauppauge

Hauppauge HD PVR 2 Manuale utente

Identivision

Identivision ICR-PH161i PIONEER Manuale utente