EverFocus EQ610x Manuale utente

EQ610x

Indoor Box Camera

600TVL, High Resolution, D-WDR

User’s Manual

* Lens not included.

Release Date: March, 2013

CAUTIONS

1. Do not install the camera near electric or magnetic fields.

2. Never disassemble the camera beyond the recommendations in this manual

nor introduce materials other than those recommended herein.

3. Try to avoid facing the camera toward the sun.

4. Keep the power cable away from water and other liquids and never touch

the power cord with wet hands.

5. Never install the camera in areas exposed to oil, gas or solvents.

6. Do not operate the camera beyond the specified temperature or humidity.

Use the camera at temperatures within -10°C~50°C (14°F~122°F) and

humidity between 20%~ 80%; this device is not rated as submersible.

7. Determine the polarity of the power adapter pigtail before connecting the

camera to the power source. The input power source is 12 VDC /

90-260 VAC~.

EQ610x

1. INTRODUCTION

The EverFocus EQ610x box camera features an incredible 600TVL resolution in

full color with a low-light sensitivity of 0.15 lux. Delivered by a high-sensitivity

sensor, the camera also features the added benefits of advanced DSP technology

to enhance image quality. This camera also utilizes technologies like DNR (to

reduce recording file sizes and thus conserve DVR HDD space), Digital Wide

Dynamic Range, Day/Night mode switching, Privacy Masking, Motion Detection,

and much more!

1.1 FEATURES

•600TVL high-resolution CCD sensor.

•High sensitivity, low smear, high anti-blooming and high S/N ratio for

high-performance video.

•Easy-to-use OSD Setup Menu.

•Built-in DNR, D-WDR and easy Day/Night functions.

•Built-in Back Light Compensation (BLC), Auto Electronic Shutter (AES), Auto

Gain Control (AGC) and Auto White Balance (AWB).

•Built-in Motion Detection and Privacy Mask for advanced surveillance

functions.

1.2 PACKAGE CONTENTS

•1 x Camera Unit

•1 x User’s Manual

•1 x Accessory Pack with Screws

•1 x Mounting Bracket

•1 x C-mount Adaptor

•1 x Power Pigtail Cable (only for 12 VDC model)

EQ610x

1.3 SPECIFICATIONS

Pickup Device 1/3" High Sensitivity Color CCD

Video Format NTSC, PAL

Picture Elements (H x V) NTSC: 811 x 507

PAL: 795 x 595

Horizontal Resolution 600TVL

Sensitivity 0.15Lux / F1.2

S/N Ratio Over 48dB (AGC off)

Video Output 1.0Vp-p Composite, 75Ω; BNC

Gamma Correction 0.45

Lens Type C/CS Mount (Lens sold separately)

Back Light

HLC / BLC / OFF

Auto Electronic Shutter 1/60(50) ~ 1/100,000 sec.

Auto Gain Control AUTO (3 Steps)

Auto White Balance ATW1 / ATW2 / AWC / Manual

Sync. Mode Internal

OSD Menu OSD Control (English / Simplified Chinese)

DNR On / Off switch

D-WDR On / Off Switch

Mirror On / Off switch

Motion Detection 4 Detection Zone Blocks

Privacy Mask 8 Zones

Power Source Two types: 90-260 VAC~ or 12 VDC

Power Consumption 12 VDC: 1W max.

90-260 VAC~: 3.1W max.

Operating Temperature -10˚C~50˚C / 14˚F~122˚F

Dimensions (W x D x H) 68 x 56 x 120 mm / 2.6 x 2.2 x 4.7 in

Weight 265 g / 0.58 lbs

Certifications CE / FCC

EQ610x

2. CAMERA OVERVIEW

2.1 NAMES AND FUNCTIONS OF PARTS

2.1.1 FRONT PANEL

2.1.2 BRACKET POSITIONS

The bracket in the package can be fitted to the screw holes on the top or bottom

of the camera for either suspending the camera or supporting it.

Light Sensor

Microphone

(Reserved for

Audio-supporting

models)

Top bracket position Bottom bracket position

EQ610x

2.1.3 Back Panel

Back Panel:

Side Panel:

1) Left-scroll button

2) Up-scroll button

3) Set button (push to activate OSD)

4) Right-scroll button

5) Down-scroll button

6) Video Output Connector

BNC connector that connects to a 75 Ohm type coaxial cable to feed the

video output of the camera to a color monitor or other video devices.

7) Power Input Terminal

Connects to the appropriate power source.

8) Auto Iris Lens Connector

This connector is used to connect to an auto iris lens via a 4 pin male

connector

Direct Drive

Pin1

Pin2

Pin3

Pin4

Cnt-

Cnt+

Drv+

Drv-

EQ610x

3 INSTALLATION

1. Unscrew the protection cap from the mouth of the lens mounting.

2. If a C-mount lens is to be used, please screw the C-mount adaptor ring (the

5mm-thick ring in the accessory pack) on to the mouth of the lens mounting.

3. Mount the lens by turning it clockwise on the lens mounting of the

camera.

4. If you use an Auto Iris lens, connect the lens’s cable to the Auto Iris

lens connector on the side of the camera.

5. Place an ND filter in front of the lens, adjust the lens focus until the

best image is obtained.

6. Lock the lens’s focus position by tightening the swivel screw, then

remove the ND filter.

Mount the lens

EQ610x

4. CONNECTIONS

Connect the cable from the video output jack of the camera to the monitor’s

input jack.

5. CAMERA SETUP OPERATIONS

This camera utilizes an On Screen Display (OSD) user setup menu.

5.1 SETUP BUTTONS

To set items on the user setup menu, use the following buttons on the back

panel.

EXT.

SENSOR

The cursor direction buttons and the SET/Enter button

Set (Enter) button

EQ610x

①ENTER

Press this button (by pressing straight down on the stick) to display the

OSD’s main menu on the monitor that you have connected directly or

indirectly to the camera’s video connector. Also press this button to

confirm changes and to open the submenus when they’re available and

selected. (Menu items with a “<┘” symbol at the end contain submenus.

For adjusting submenu items, select the desired menu item with the 

and buttons and press the ENTER button to open the desired

submenu. Use the and buttons to toggle between value options.)

②R (RIGHT)

Press this button (by pressing the control stick to the right) to move the

on-screen cursor to the right to select items or to adjust the

level/intensity of a selected function. The level/intensity increases when

this button is pressed.

③L (LEFT)

Press this button (by pressing the control stick to the left) to move the

cursor to the left to select items or to adjust the level/intensity of a

selected function. The level/intensity decreases when this button is

pressed.

④D (DOWN)

Press this button (by pressing the control stick in the “down” direction)

to scroll the on-screen cursor downwards between menu items.

⑤U (UP)

Press this button (by pressing the control stick in the “up” direction) to

scroll the on-screen cursor upwards between menu items.

Indice

Altri manuali EverFocus Telecamera di sicurezza

EverFocus

EverFocus Speed Dome EPTZ1000 Manuale utente

EverFocus

EverFocus EQH5102 Manuale utente

EverFocus

EverFocus UNI IP Series Manuale utente

EverFocus

EverFocus EAN600 Manuale utente

EverFocus

EverFocus EPTZ3000 Manuale utente

EverFocus

EverFocus ED610 Manuale utente

EverFocus

EverFocus ED2250S/P Manuale utente

EverFocus

EverFocus EM700 Manuale del proprietario

EverFocus

EverFocus Color Rugged Dome Camera EHD350 Manuale utente

EverFocus

EverFocus EHD930F eZ.HD Series Manuale utente

EverFocus

EverFocus EI220 Manuale utente

EverFocus

EverFocus EBA2880 Manuale utente

EverFocus

EverFocus EPTZ100 Manuale utente

EverFocus

EverFocus EHD300/N-2 Manuale utente

EverFocus

EverFocus EHD650 Manuale utente

EverFocus

EverFocus EQH5000 Manuale utente

EverFocus

EverFocus EZ-PLATECAM2 Manuale utente

EverFocus

EverFocus ED200 Series Manuale utente

EverFocus

EverFocus EIP220 Manuale utente

EverFocus

EverFocus EZ655p Manuale utente

EverFocus

EverFocus EDH5102 Manuale utente

EverFocus

EverFocus EAN3200 Manuale utente

EverFocus

EverFocus EI220 Manuale utente

EverFocus

EverFocus EMN2220 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente