EQUIPMENT LIST
•3D printed parts for the
eggbot, available here
•3 x [M8x300 threaded rods]
•1 x [M8x100 threaded rod]
•2 x [608ZZ bearings]
•1 x [9g micro servo]
•1 x [spring, slightly larger
than 8mm in diameter,
about 4cm long]
•2 x [silicon o-rings]
•1 x [Arduino uno board]
•1 x [Adafruit motor shield V2]
•2 x [NEMA 17 stepper motors ,
step angle 1.8°, rated voltage 12V,
rated current 1.7A]
•1 x [Power supply 12v/2A]
•20 x [M8 nuts]
•1 x [M2x14 screw]
•5 x [M2x10 screws]
•3 x [M3x15 screws]
•3 x [M2x7 screws]
•5 x [M2x10 screws]
•3 x [m3x15 screws]
•3 x [M2x7 screws]
•2 x [M3 bolts]
•2 x [M3 washers]
•6 x [M2 washers]
•1 x [M2 nut]
•1x [M3x35 screw]
