EVOLUTION MEASUREMENT EvoScann CANDI ELE-CANDI-CANDI01 Scheda tecnica

EvoScann® CANDI

Page | 1

Evolution Measurement Ltd

Product User Guide

EvoScann® CANDI

CANbus to USB Converter

(P# ELE-CANDI-CANDI01)

Revision History:

Issue: 1 Revision: 0

First issued –August 2020

Issue: 1 Revision: 1

Updated Logging Information / GUI Info

EvoScann® CANDI

Page | 2

Content:

Section: Page:

1 Introduction………………………………………………………….……………………..3

1.1 Scope & Definitions

1.2 Description

2Technical Data……………………………………………………………..………..4

2.1 Specification

2.2 Dimensions

3Installation & Use…………………………………………………….……………..6

3.1 Unpack and Inspect

3.2 Drivers and GUI Installation

3.3 Electrical Connection

4Operation……………………..………………………………………………….…..8

5 Maintenance……………………………………………..…………………………..8

5.1 General Information

5.2 Safety Information

5.3 Fault finding

5.4 Repair and Recalibration

6 Storage and Disposal…………………..……………………………………..……9

6.1 Storage

6.2 Disposal

7 GUI - Graphical User Interface Use………………………………………………10

EvoScann® CANDI

Page | 3

1. Introduction

1.1 Scope & Definitions

This manual provides installation, operation and maintenance instructions for the EvoScann® CANDI

CANbus to USB Converter

1.2 Description

EvoScann® CANDI is designed for use with our range of P-Series Pressure Scanners and allows for

integration of a single scanner with a personal computer running our Graphical User Interface (GUI).

The CANDI is powered over a USB port on your personal computer and operation is enabled by

installation of the required drivers and software provided on the USB Drive.

The CANDI and GUI allow for set-up and configuration of an individual EvoScann® P-Series Pressure

Scanner, where access to a CANbus enabled system is not possible, and provides for simple scanning

and logging, or to allow troubleshooting and fault identification.

Electrical connection can be made to the EvoScann® P-Series Pressure Scanner either via the green

4-way terminal block or fixed ASX Circular Connector. Note, only one scanner should be attached at a

time, using only one connection method.

EvoScann® CANDI

Page | 4

2. EvoScann® CANDI CANbus to USB Converter Technical data

2.1 Specification

Standard Supply: Peli 1040 Micro Case

EvoScann® CANDI Converter

1 m USB Lead

ASX Mating Connector

USB Drive with Files

P-Series Inputs: CANDI - ASX Connector –ASX002-05SB-HE-R (Socket)

P-Series –ASX Connector –ASX602-05PB-HE-R (Plug)

CANDI –Screw Terminal –MKDS ¼-3,5

USB Connection: CANDI –Micro USB Type B Female, USB 2.0

PC –USB A Female

(Supplied Lead Male USB A to Male USB Micro B –1 m)

Power Requirement: USB 5 V ± 5%

Note: CANDI has an internal 12V DC Voltage Converter

Construction materials: Aluminium / Plastic / Stainless Steel

Operating Temperature: +10°C to +60°C

Communication: CANbus over USB

Operating System: Windows®10, 8.1 (32/64-bit)

Driver Requirement: PEAK-System Installation Package (Supplied)

National Instruments™ Runtime Engine (Supplied)

Software: Evolution Measurement Node Tool (P-Series Specific)

Dimensions:

Outer case: 85 x 75 x 20 mm

EvoScann® CANDI

Page | 5

2.2 Product Outline Dimensions EvoScann® CANDI CANbus to USB Converter

EvoScann® CANDI

Page | 6

3. Installation & Use

EvoScann® CANDI is ideal for use as a desktop tool, or as part of a remote measurement package.

Consideration of mounting position and use will ensure optimal performance and instrument longevity.

The EvoScann® CANDI is designed to be robust but should be handled and installed with all reasonable

and usual precautions necessary for a measurement instrument.

3.1 Unpack and Inspect

Remove all packaging materials from the unit and check for any damage.

If the unit has been damaged, notify the supplier and carrier in writing within three days of delivery,

stating the item number, serial number and order number.

Retain all package materials for further inspection. Do not use the unit if it has been damaged.

3.2 Drivers and GUI Installation

Refer to the supplied USB Drive for files and Readme.txt regarding installation of the Drivers and GUI

version before any connection to the EvoScann® P-Series Pressure Scanner is attempted.

EvoScann® CANDI

Page | 7

3.3 Electrical Connection

Electrical Cable Identification

Cable Identification

YELLOW

CANH

GREEN

CANL

RED

SUPPLY (VSUP)

BLACK

GND

(Note: Check direction indication marked on the one fitted to your CANDI)

EvoScann® CANDI

Page | 8

4. Operation

Operation of the EvoScann® CANDI is simple and straightforward. With the GUI running and the P-Series

electrically connected the scanner will immediately start to scan.

Below is a screenshot of a typical display from the EvoScann® GUI, with EvoScann®

(P-Series P8-A for information). Refer to Section 7 for use.

EvoScann® CANDI

Page | 9

5. Maintenance

5.1 General Information

EvoScann® CANDI is designed to require no user intervention other than checking electrical

connections are sound for the connected equipment

5.2 Safety Information

Observe all appropriate safety precautions when operating any electrical equipment. Always ensure

wiring is done by competent persons in strict accordance with the electrical connection details in this

document.

Do not use abrasive or solvent substances to clean the unit.

Do not attempt to open the EvoScann® CANDI. The unit is factory sealed and opening the unit will result

in removal of any and all warranty.

5.3 Fault finding

Symptom:

Check likely cause:

Scanner not functioning

Ensure Drivers are fully installed and operational.

Ensure correct wiring connections are made.

Ensure USB is connected to a functional Port

Scanner reading incorrect pressures

Check correct range is selected

Scanner reading intermittently

Check correct version of GUI is being used for P-

Series connected

5.4 Repair & Recalibration

Field repair is not possible with EvoScann® CANDI. All repairs must be carried out by Evolution

Measurement Ltd.

To ensure optimum service and performance, return to Evolution Measurement Ltd.

See contact us page.

EvoScann® CANDI

Page | 10

6. Storage and Disposal

6.1 Storage

EvoScann® CANDI should be placed in its supplied case when not in use and store in a clean, dry, dust

and moisture-free area, avoiding temperature extremes. Avoid the risk of droppage, vibration or other

unnecessary impact.

6.2 Disposal

At end of life, dispose of EvoScann® CANDI in full accordance with all local procedures and practices, or

return the unit to Evolution Measurement Ltd for disposal. Do not incinerate as the product may emit

noxious fumes.

Indice

Manuali Convertitore multimediale popolari di altre marche

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuale utente

SPROLINK

SPROLINK VA1 Manuale utente

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuale utente

Nikon

Nikon AF-S TC-20E III Manuale utente

Axis

Axis AXIS Q7406 Manuale utente

Omega

Omega TAC80B-J Manuale utente

Zoom

Zoom Thunderbolt TAC-2R Manuale utente

OST

OST iConverter 10/100M Manuale utente

Vertiv

Vertiv Netsure Manuale utente

birddog

birddog MINI Manuale utente

Roland

Roland GI-10 Manuale utente

Wallenstein

Wallenstein WX310 Manuale utente

Pace

Pace MSS 200-1 Manuale utente

Solar Converters

Solar Converters EQ 12/24-50 Manuale utente

CYP

CYP EL-7400V Manuale utente

TIE

TIE MIDI 1i1o Manuale utente

DCS

DCS Vivaldi Upsampler Manuale utente

Westermo

Westermo MCW-211 SERIES Manuale utente