EXFO FIP-400B Manuale utente
User Guide
Fiber Inspection Probe and
ConnectorMax2 Mobile (Android)
FIP-400B
www.EXFO.com
ii FIP-400B
Copyright © 2015–2020 EXFO Inc. All rights reserved. No part of this
publication may be reproduced, stored in a retrieval system or transmitted
in any form, be it electronically, mechanically, or by any other means such
as photocopying, recording or otherwise, without the prior written
permission of EXFO Inc. (EXFO).
Information provided by EXFO is believed to be accurate and reliable.
However, no responsibility is assumed by EXFO for its use nor for any
infringements of patents or other rights of third parties that may result from
its use. No license is granted by implication or otherwise under any patent
rights of EXFO.
EXFO’s Commerce And Government Entities (CAGE) code under the North
Atlantic Treaty Organization (NATO) is 0L8C3.
The information contained in this publication is subject to change without
notice.
Trademarks
EXFO’s trademarks have been identified as such. However, the presence
or absence of such identification does not affect the legal status of any
trademark.
Units of Measurement
Units of measurement in this publication conform to SI standards and
practices.
Patents
Feature(s) of this product is/are protected by one or more of: US design
patent D751434 and equivalents in other countries; US design patent
D742394; US design patent D866575; US patent 9,841,579 and equivalent
patent(s) pending and/or granted in other countries; US patent 9,921,373;
patent appl. US 2017/0003195 A1 and equivalent patent(s) pending and/or
granted in other countries; US 2019/0170610 A1 and equivalent patent(s)
pending and/or granted in other countries; and/or other US design patent
pending.
Version number: 23.0.0.1
Contents
Fiber Inspection Probe iii
Contents
FIP-400B Fiber Inspection Probe Regulatory Information .......................................................vi
Multifiber Source Regulatory Information ..............................................................................x
1 Introducing the FIP-400B Fiber Inspection Probe and
ConnectorMax2 Mobile ................................................................................ 1
Probe ......................................................................................................................................2
Multifiber Source ....................................................................................................................5
Available Probe Models ..........................................................................................................7
Probe Tips ...............................................................................................................................8
Probe LED Indicators ...............................................................................................................8
Multifiber Source LED Indicators ...........................................................................................10
Using Your Unit with TestFlow ..............................................................................................11
ConnectorMax2 Mobile Software .......................................................................................12
Technical Specifications .........................................................................................................13
Conventions ..........................................................................................................................14
2 Safety Information ..................................................................................... 15
Other Safety Symbols on Your Unit .......................................................................................17
Laser Safety Information for the Multifiber Source ...............................................................18
Electrical Safety Information .................................................................................................19
3 Setting up Your Fiber Inspection Probe and ConnectorMax2 Mobile ..... 23
Preparing to Use the Mobile Application ..............................................................................23
Connecting or Disconnecting the Wireless Probe ..................................................................24
Changing the Fiber Inspection Probe Tip ..............................................................................27
Changing the FIP Nozzle (MF-Ready Probes Only) .................................................................28
Adjusting Brightness .............................................................................................................34
Setting up Identification .......................................................................................................35
Setting up the Incrementation ..............................................................................................37
Setting up Autonaming ........................................................................................................41
Setting up Auto Capture .......................................................................................................43
Managing and Selecting Test Configurations .......................................................................44
Modifying the File Format .....................................................................................................52
Stopping the Analysis Process on First Fail ............................................................................54
Restoring to Default Settings ................................................................................................56
Contents
iv FIP-400B
4 Inspecting Fiber Ends .................................................................................59
Inspecting Fiber Ends (Single Fiber and Transceiver - Fiber Receptacles) ..............................59
Inspecting Multiple Fiber Ends (MF-Ready Probes Only) .......................................................64
Saving Files ...........................................................................................................................77
Managing Files ....................................................................................................................80
Analyzing Captures ...............................................................................................................83
Creating and Viewing Reports ..............................................................................................90
Transferring Results With Third-Party Applications ................................................................93
Using the Probe in Standalone Mode ...................................................................................97
Updating the Firmware .........................................................................................................99
5 Working with a Multifiber Source ...........................................................101
Turning On or Off the Multifiber Source .............................................................................102
Setting up the Multifiber Source .........................................................................................103
Understanding Fiber Continuity ..........................................................................................106
Understanding Fiber Polarity ..............................................................................................107
6 Maintenance ..............................................................................................109
General Maintenance ..........................................................................................................109
Battery Safety Recommendations .......................................................................................110
Cleaning MPO-Type Connectors .........................................................................................111
Cleaning Lenses ..................................................................................................................112
Recharging the Battery .....................................................................................................113
Recharging the Battery of the Multifiber Source .................................................................114
Replacing the Battery ........................................................................................................115
Replacing the Battery of the Multifiber Source ...................................................................117
Recycling and Disposal .......................................................................................................122
7 Troubleshooting ........................................................................................123
Solving Common Problems .................................................................................................123
Changing the File Contents ................................................................................................127
Contacting the Technical Support Group ............................................................................129
Viewing Information About ConnectorMax2 Mobile .........................................................130
Viewing Online Help ...........................................................................................................131
Transportation ....................................................................................................................131
8 Warranty ....................................................................................................133
General Information ...........................................................................................................133
Liability ...............................................................................................................................134
Exclusions ...........................................................................................................................134
Certification ........................................................................................................................134
Service and Repairs .............................................................................................................135
EXFO Service Centers Worldwide ........................................................................................136
FIP-400B Fiber Inspection Probe Regulatory Information
vi FIP-400B
FIP-400B Fiber Inspection Probe Regulatory
Information
Canada and USA Electromagnetic Interference
Regulatory Statement
Electronic test and measurement equipment is exempt from FCC part 15,
subpart B compliance in the United States of America and from ICES-003
compliance in Canada. However, EXFO Inc. makes reasonable efforts to
ensure compliance to the applicable standards.
The limits set by these standards are designed to provide reasonable
protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance
with the user documentation, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
European Electromagnetic Compatibility
Regulatory Statement
Warning: This is a class A product. In a domestic environment, this product
may cause radio interference in which case the user may be required to
take adequate measures. Your product is certified for (or is suitable for) use
in industrial electromagnetic environments.
FIP-400B Fiber Inspection Probe Regulatory Information
Fiber Inspection Probe vii
General Wireless Compliance Related Information
The wireless probe comes with an internal wireless module (adapter) and
antenna for which the information hereafter applies:
This product does not contain any wireless user-serviceable components.
Any unauthorized product changes or modifications will invalidate
warranty and all applicable regulatory certifications and approvals.
Canada and USA Wireless Compliance Related
Information
The wireless probe comes with an internal wireless module (adapter) and
antenna for which the information hereafter applies:
This device complies with Part 15 of the FCC Rules.
This device complies with Innovation, Sciences and Economic
Development Canada license-exempt RSS standards.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Use in Specific Environments:
The use of wireless products in hazardous locations is limited by the
constraints posed by the safety directors of such environments.
The use of wireless products on airplanes is governed by the Federal
Aviation Administration (FAA).
The use of wireless products in hospitals is restricted to the limits set
forth by each hospital.
Do not operate a portable transmitter near unshielded blasting caps or
in an explosive environment.
FIP-400B Fiber Inspection Probe Regulatory Information
viii FIP-400B
Radiation Exposure Statement:
The product complies with the US/Canada portable RF exposure limit
set forth for an uncontrolled environment and is safe for intended
operation as described in this user documentation.
Further RF exposure reduction can be achieved if the device can be
kept as far as possible from the user’s body.
European Community Wireless Compliance
Related Information
The information about the Wi-Fi frequency bands is as follows:
Between the frequencies 2400.0 MHz - 2483.5 MHz.
The maximum output power is 15 dBm.
This device is a 2.4 GHz wideband transmission system (transceiver),
intended for use in all EU member states and EFTA countries, except in
France and Italy where restrictive use applies.
In Italy, the end-user should apply for a license at the national spectrum
authorities in order to obtain authorization to use the device for setting up
outdoor radio links and/or for supplying access to telecommunications
and/or network services.
This device may not be used for setting up radio links in France, and in
some areas the RF output power may be limited to 10 mW EIRP in the
frequency range of 2454 - 2483.5 MHz. For detailed information, the
end-user should contact the national spectrum authority in France.
FIP-400B Fiber Inspection Probe Regulatory Information
Fiber Inspection Probe ix
Local Restrictions on 802.11a, 802.11b, 802.11d,
802.11g, 802.11n, and 802.11ac Radio Usage
Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11d,
802.11g, 802.11n, and 802.11ac wireless LAN devices may not yet be
harmonized in all countries, 802.11a, 802.11b, 802.11d, 802.11g, 802.11n,
and 802.11ac products are designed for use only in specific countries, and
are not allowed to be operated in countries other than those of designated
use. As a user of these products, you are responsible for ensuring that the
products are used only in the countries for which they were intended and
for verifying that they are configured with the correct selection of
frequency and channel for the country of use.
European Declaration of Conformity
Hereby, EXFO declares that the radio equipment type “Wideband Data
Transmission” is in compliance with European Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
Internet address: www.exfo.com/en/resources/legal-documentation.
Japanese Technical Conformity Mark for Radio
Law
Technical parameters:
Standards: IEEE 802.11b/g/n
Operation Frequency: 2412 ~ 2483.5 MHz
Throughput: 150 Mbps, 1T1R
R018-160052
Multifiber Source Regulatory Information
xFIP-400B
Multifiber Source Regulatory Information
Canada and USA Electromagnetic Interference
Regulatory Statement
Electronic test and measurement equipment is exempt from FCC part 15,
subpart B compliance in the United States of America and from ICES-003
compliance in Canada. However, EXFO Inc. makes reasonable efforts to
ensure compliance to the applicable standards.
The limits set by these standards are designed to provide reasonable
protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance
with the user documentation, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
European Electromagnetic Compatibility
Regulatory Statement
Warning: This is a class A product. In a domestic environment, this product
may cause radio interference in which case the user may be required to
take adequate measures. Your product is certified for (or is suitable for) use
in industrial electromagnetic environments.
European Declaration of Conformity
The full text of the EU declaration of conformity is available at the following
Internet address: www.exfo.com/en/resources/legal-documentation.
Altri manuali per FIP-400B
3
Questo manuale è adatto per i seguenti modelli
5
Indice
Altri manuali EXFO Strumento analitico
