EXP PRO EXP48PRO Manuale utente
EXP PRO Batteries
Handheld Power
EXP48PRO & EXP96PRO
User Manual
Power to Explore
www.EXPPROPOWER.com
Spanish & French translations available on our website
Table of Contents
General Battery Information
1. Introduction
2. Description
3. Contents
4. Charging Your Battery
5. Other Information About Charging Your Battery
6. Charging Your Battery with a Solar Panel
7. Capacity/Specifications
8. Powering From the DC Output Port
9. Pass-Through Technology
10. Parallel Connection of Batteries (Parallel Connection)
11. Operating the White Light/Emergency Amber Flashing Light
12. Battery Management System (BMS)
13. Airline Travel
14. Battery Storage
15. Safe Use of Lithium Batteries
16. FAQs
CPAP User Information
17. Powering Your PAP Machine from the DC Output Port
(Recommended)
18. PAP Machine DC Power Cords
19. Powering Your PAP Machine from the AC Output Port (Using a Pure
Sine Inverter)
20. PAP Machine Runtimes
21. Notes
Warranty Information
22. Limited Warranty
23. Register Your EXP PRO Product
General Battery Information
1. Introduction
Thank you for purchasing an EXP PRO Battery. This instruction
manual contains important information about usage and safety. Use
the product as described and keep this manual for future reference.
Before reading through the manual, you can begin to charge your
EXP PRO Battery by connecting it to the AC power supply cord
provided and plugging into a wall socket. See Section 4 - Charging Your
Battery.
2. Description
*Please note the EXP96PRO Battery has 2 DC Output Ports
3. Contents
●EXP48PRO or EXP96PRO Battery
●Protective Sleeve for Battery
●AC Charger: Input 110V-240V / Output 15V@2A (2000mA)
●DC Charger: Input 12V-24V / Output 15V@2A (2000mA)
●User Manual
4. Charging Your Battery
A. Select the method of charging. AC (plugs into the wall)
and DC (plugs into the car) cords are both included.
B. Plug the charging cable into the charging input port
located on the battery and the other end into the
appropriate power source.
C. Charging will begin automatically.
D. Battery is fully charged when all power indicator lights
have been solidly lit for at least 30 minutes.
E. Indicator Lights:
1 light lit = 0-25% battery charge
2 lights lit = 25-50% battery charge
3 lights lit = 50-75% battery charge
4 lights lit = 75-100% battery charge
5. Other Information About Charging Your Battery
●Never leave the battery unattended for long periods of time
while charging.
●Do not charge below 32°F. Optimum ambient charge
temperature is 40°F - 110°F.
●Do not charge the battery if the charge cord or battery has
obvious damage or if the battery appears to be bulging. A
bulging battery is a potential sign of damaged lithium cells.
●Do not charge the battery if it feels excessively hot. The
battery should not reach more than 120°F while charging or
discharging and should not feel hotter than a warm cup of
coffee to the touch.
6. Charging Your Battery with a Solar Panel
7. Capacity/Specifications
Full capacity and specification information can also be found on the
back of each battery.
●DC Output Port: DC12V@10A Continuous / 15A Peak (5Min)
●Type C Input: DC5V@3A / 9V@3A / 15V@3A / 20V@2.25A
●Type C Output: DC5V@3A / 9V@3A / 12V@3A / 15V@3A / 20.3V@3A
●USB Output 1: DC5V@2.4A
●USB Output 2: DC3.6V-6.5V@3A / 6.5V-9V@2A / 9-12V@1.5A
EXP PRO offers a high efficiency monocrystalline panel that is
designed to be a genuinely portable charging solution for the
EXP48PRO and EXP96PRO Battery line. It is soft and foldable,
allowing easy portability for your adventures. See
www.EXPPROPOWER.com
If you choose to use your own solar panel EXP PRO offers a cord
that will connect most other solar panels to the battery.
EV-SOLAR-C
This solar panel adapter charge cord allows you to charge the EXP
PRO batteries using an 18-22V 40W non-regulated solar panel.
Uses a popular SAE style connector on the solar end.
EXP48PRO: 153.6-Watt Hours (Wh) / 12.8 Amp Hours (Ah) @
12V / 48,000 Milli Amp Hours (mAh) @ 3.2V.
EXP96PRO: 307.2-Watt Hours (Wh) / 25.6 Amp Hours (Ah)
@ 12V / 96,000 Milli Amp Hours (mAh) @ 3.2V.
8. Powering From the DC Output Port
A. Plug your device into the main round power port ensuring
a secure fit, using a 12V cigarette style plug that is meant
to power your device.
B. The port(s) will automatically turn on and provide power
to the connected device.
C. To turn off the device, simply unplug it from the power
port.
9. Pass-Through Technology
The EXP48PRO and EXP96PRO are equipped with “Pass Through”
technology. This allows you to charge devices connected to the
battery while the battery is being charged. The battery will
automatically detect a power outage and switch to battery power.
Please note to get the most life out of your EXP PRO battery, we
suggest only using this option if there is concern about a potential
power outage.
10. Parallel Connection of Batteries (Daisy Chaining)
You can parallel connect no more than two batteries by plugging in
the provided DC charge cord to the charge port on one battery and
the main power port marked 12V/15A on the other battery in order
to double the available capacity.
11. Operating the White Light/Emergency Amber
Flashing Light
White Light: Press and hold the power button to turn on. Press and
hold the power button, again, to turn off.
Emergency Amber Flashing: Quickly press the power button twice
to turn on. Quickly press the power button twice, again, to turn off.
12. Battery Management System (BMS)
The EXP PRO battery line has a built-in BMS that controls balanced
charging and discharging of the individual Lithium cells contained
within. It also provides protection from:
●Over-Charging •Over-Discharging
●Over-Current •Over-Temperature
●Short Circuit
If the BMS has been tripped to protect the lithium cells and has shut
down the battery simply plug in the AC charge cord as if charging and
the BMS will reset itself and resume normal operation.
13. Airline Travel
EXP48PRO:
Up to two of the EXP48PRO batteries can be brought with you in
your carry-on luggage. While the FAA regulations state the limit is
160 watts, and the EXP48PRO only contains 153.6 watts per
battery, ultimately the final decision rests with the TSA officer on
whether an item is allowed through the checkpoint.
EXP96PRO:
The EXP96PRO contains 307.2 watts per battery and does not
meet FAA regulations for airline travel.
Please check current FAA regulations and the individual airline rules
prior to airline travel. Do not put EXP PRO batteries or any other
lithium batteries or devices containing lithium batteries in checked
baggage of any type. If allowed by FAA regulations and individual
airline rules only take in carry-on baggage. Current FAA regulations
can be found on their website at www.faa.gov search “Pack Safe
Lithium Batteries”. The major airlines list rules for lithium batteries
on their websites.
14. Battery Storage
Your battery is initially packed and shipped at roughly 10-30%
charge. It is best practice to fully charge your battery before the first
use. For storage greater than 3 months, the general rule is to store at
40-50% of capacity, or having only 2 indicator lights lit. We have
provided a “Notes” section for you to keep track of your battery
maintenance.
15. Safe Use of Lithium Batteries
●Never expose the battery to liquids, especially saltwater. This
can cause internal corrosion and damage to the lithium cells
and/or the BMS, causing them to malfunction.
●Although the battery consists of a shock absorbing case,
handle with as much care as possible to avoid dropping the
battery. This can damage the lithium cells, or more likely the
BMS, causing them to malfunction.
●Never operate the battery in direct sunlight. This is hard on
the BMS electrical components and the lithium cells.
Prolonged use in direct sunlight can damage the battery.
16. FAQs
How long will it take to charge my battery?
EXP48PRO: Approximately 6.5 hours ± @ 2A.
EXP96PRO: Approximately 13.0 Hours ± @ 2A.
Can I use an inverter?
An inverter can be used with EXP PRO Battery Line. Please note
that using an inverter will draw additional power from the battery
to convert DC to AC power. Visit www.EXPPROPOWER.com for
more information.
How many life cycles (discharge and recharge) should I expect
from my EXP PRO battery?
Up to 5000.
What are some common devices I can charge with my EXP PRO
battery?
Cell Phones, Go Pros, Laptops, Tablets, Bluetooth Speakers,
Drones, LED Lights, CPAP machines, BiPAP machines, Cameras, Air
Pods and more.
Can I use a different charge cord other than the two supplied with
my battery?
Use of a different charge cord may damage the battery and is not
recommended. Replacement cords may be available to purchase
through your battery retailer, or you can find them on
www.EXPPROPOWER.com.
Can I run 2 PAP devices off of the EXP96PRO battery?
Yes. There are 2 DC output ports available on the EXP96PRO
battery. A PAP device may be plugged into each of these ports and
run at the same time.
CPAP User Information
17. Powering Your PAP Machine From The DC Output
Port (Recommended) See website for ordering or more information
A. Obtain the DC power cord for your PAP machine. This cord
is a 12V cigarette style plug that is meant to power your
specific PAP machine and is sold separately from this
battery.
B. Using the DC power cord specific to the individual PAP
machine being powered, plug your device into the DC
Output Port on the battery ensuring a secure fit.
C. The port(s) will automatically turn on and provide power to
the connected device.
D. To turn off the device, simply unplug it from the power port.
E. To get the most run time from the battery we recommend
turning off all auxiliary features such as heated hose and
humidifier.
Altri manuali per EXP48PRO
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali EXP PRO Accessori per fotocamere
