ExtraHop EDA 6200 Manuale utente

© 2021 ExtraHop Networks, Inc. All rights reserved.

Replace 120 GB Packet Capture SSD with 480

GB SSD in the Discover Appliance

Published: 2021-09-04

This procedure describes how to replace a 120 GB packet capture SSD with a 480 GB SSD in the EDA

6200, EDA 8200, EDA 9200, and EDA 10200 appliances.

1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-

hostname-or-IP-address>/admin.

2. In the Appliance Settings section, click Disks.

3. In the Packet Capture section, next to SSD Assisted Packet Capture, click Configure.

4. Click Remove Disk.

5. Select Quick Format or Secure Erase and then click Remove.

After this step is complete, it is safe for you to remove the disk from the appliance.

6. Remove the front bezel. Press and hold the release button on the left end of the bezel and swing the

bezel slightly to the right. Gently pull the bezel forward until it disconnects from the USB connector on

the right side of the appliance.

7. Remove the 120 GB drive. The drive is located in the following slot for each appliance.

Figure 1: EDA 6200 - Slot 6

Figure 2: EDA 8200 - Slot 8

Figure 3: EDA 9200 and EDA 10200 - Slot 14

8. Insert the new 480 GB drive into the same slot where the previous drive was installed.

9. Return to the Administration settings.

10. In the Unused Disks section, next to SSD Assisted Packet Capture, click Enable.

Replace 120 GB Packet Capture SSD with 480 GB SSD in the Discover Appliance 2

11. Click OK to add the packet capture disk

Verify the replacement drive

Follow the steps below to ensure that you can successfully write packets to the new packet capture disk.

1. In the Packet Captures section, click Global Packet Capture.

2. Type a name for the packet capture and then click Start.

3. Click Stop.

4. Return to the Administration settings and click View and Download Packet Captures.

Note: On Reveal(x) systems, go to the Packets page and confirm that packets appear in the

packets table.

5. Verify that your named packet capture appears in the packet capture list.

6. Click the name of the packet capture and download the file to your computer.

The drive replacement procedure is complete. You do not need to return the 120 GB disk to ExtraHop

Networks.

Questo manuale è adatto per i seguenti modelli

3

Indice

Altri manuali ExtraHop Hardware di rete

ExtraHop

ExtraHop Discover 8200 Manuale utente

ExtraHop

ExtraHop EDA 10200 Manuale utente

ExtraHop

ExtraHop EDA 6200 Manuale utente

ExtraHop

ExtraHop EDA 4200 Foglio di istruzioni

ExtraHop

ExtraHop EDA 1200 Manuale utente

ExtraHop

ExtraHop DISCOVER EDA 6200 Manuale utente

ExtraHop

ExtraHop Trace 6150 Manuale utente

ExtraHop

ExtraHop Discover EDA 6200 Manuale utente

ExtraHop

ExtraHop EDA1100 Manuale utente

ExtraHop

ExtraHop 72 TB ESU Manuale utente

ExtraHop

ExtraHop Discover EH3000 Manuale utente

ExtraHop

ExtraHop Trace Admin UI Manuale utente

ExtraHop

ExtraHop Discover 1200 Manuale utente

ExtraHop

ExtraHop ETA 8250 Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente