VTG 300/300R • Setup Guide (Continued)
Extron USA - West
Headquarters
+800.633.9876
Inside USA and
Canada Only
+1.714.491.1500
+1.714.491.1517 FAX
Extron USA - East
+800.633.9876
Inside USA and
Canada Only
+1.919.863.1794
+1.919.863.1797 FAX
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.2991800
+971.4.2991880 FAX
© 2011 Extron Electronics All rights reserved. www.extron.com
VTG 300/300R • Setup Guide (Continued)
Extron USA - West
Headquarters
+800.633.9876
Inside USA and
Canada Only
+1.714.491.1500
+1.714.491.1517 FAX
Extron USA - East
+800.633.9876
Inside USA and
Canada Only
+1.919.863.1794
+1.919.863.1797 FAX
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.2991800
+971.4.2991880 FAX
© 2011 Extron Electronics All rights reserved. www.extron.com
68-737-50
Rev. A 10 11
68-737-50
Rev. A 10 11
Menu System
Use the Menu button to advance through the main menus. Use the Next button to navigate
through the submenu system (see the Menus, Configuration, and Adjustments section
of the User Guide).
zTest Pattern Setup
zGrayscale — To change the grayscale test pattern, select the Grayscale submenu
from the Test Patterns main menu. Use the and buttons to select 32-Level
or Ramp.
zWhite Field — To change to the white field test pattern select the White Field
submenu from the Test Patterns main menu. Use the and buttons to select
Full Field,Window 80%, or Window 20%.
zAudio Setup
zUnits — To select the audio level units select the Units submenu from the Audio
Setup main menu. Use the and buttons to select dBV or dBu.
zOutput 3 — To change the audio output format from Output #3 (3.5mm) select the
Output 3 submenu from the Audio Setup main menu. Use the and buttons
to select Left Only, Right Only, or Left + Right.
zVideo Setup
zHD15 Format — To select the format of the video for the HD15 output select HD15
Format submenu from the Video Setup Main menu. Use the and buttons to
select RGB or Y, B-Y,R-Y as the output format.
zRGB Sync Format — To select a sync format for the HD15 output, select the RGB
Sync Fmt submenu from the Video Setup Main menu. Use the and buttons
to select RGBHV, RsGsBs, RGsB or RGBS as the output sync format.
zAdvanced Setup
zPower Off Timer — To change the time setting for the automatic power off
feature select the PwrOff Timer submenu from the Advanced setup main menu.
Use the and buttons to select Disabled, 30 min, 15 min, or 5 min as the
setting.
zButton Lock Mode
zTo prevent unwanted configuration changes Button Lock mode can be enabled.
Simultaneously press and hold the Signal button and Test Patterns button for
two seconds. When the Button Lock mode has been enabled the message “Button
Lock Enabled” is displayed for two seconds.
zTo disable Button Lock mode simultaneously press and hold the Signal button and
Test Patterns button for two seconds. When the Button Lock mode has been
disabled the message “Button Lock Disabled” is displayed for two seconds.
Menu System
Use the Menu button to advance through the main menus. Use the Next button to navigate
through the submenu system (see the Menus, Configuration, and Adjustments section
of the User Guide).
zTest Pattern Setup
zGrayscale — To change the grayscale test pattern, select the Grayscale submenu
from the Test Patterns main menu. Use the and buttons to select 32-Level
or Ramp.
zWhite Field — To change to the white field test pattern select the White Field
submenu from the Test Patterns main menu. Use the and buttons to select
Full Field,Window 80%, or Window 20%.
zAudio Setup
zUnits — To select the audio level units select the Units submenu from the Audio
Setup main menu. Use the and buttons to select dBV or dBu.
zOutput 3 — To change the audio output format from Output #3 (3.5mm) select the
Output 3 submenu from the Audio Setup main menu. Use the and buttons
to select Left Only, Right Only, or Left + Right.
zVideo Setup
zHD15 Format — To select the format of the video for the HD15 output select HD15
Format submenu from the Video Setup Main menu. Use the and buttons to
select RGB or Y, B-Y,R-Y as the output format.
zRGB Sync Format — To select a sync format for the HD15 output, select the RGB
Sync Fmt submenu from the Video Setup Main menu. Use the and buttons
to select RGBHV, RsGsBs, RGsB or RGBS as the output sync format.
zAdvanced Setup
zPower Off Timer — To change the time setting for the automatic power off
feature select the PwrOff Timer submenu from the Advanced setup main menu.
Use the and buttons to select Disabled, 30 min, 15 min, or 5 min as the
setting.
zButton Lock Mode
zTo prevent unwanted configuration changes Button Lock mode can be enabled.
Simultaneously press and hold the Signal button and Test Patterns button for
two seconds. When the Button Lock mode has been enabled the message “Button
Lock Enabled” is displayed for two seconds.
zTo disable Button Lock mode simultaneously press and hold the Signal button and
Test Patterns button for two seconds. When the Button Lock mode has been
disabled the message “Button Lock Disabled” is displayed for two seconds.
