Extron electronics Emotia Xtreme MX Manuale utente
User's Manual
Contents
Introduction to the Emotia Xtreme MX............................................... Chapter 1
Introduction ..........................................................................................1-1
About this Manual.........................................................................1-1
Features .......................................................................................1-2
Specifications ...............................................................................1-3
Installation and Operation................................................................... Chapter 2
Installing the Emotia Xtreme MX .........................................................2-1
Rack Mounting .............................................................................2-1
Cabling .........................................................................................2-1
Connecting the Input and Output Cables ..............................2-1
Front and Rear Panels .................................................................2-5
Front Panel............................................................................2-5
Rear Panel ............................................................................2-6
Other Reference Material..................................................................Appendix A
Accessories/Part Numbers ................................................................. A-1
Safety Instructions ...................................................... Inside Front Cover
Limited Warranty .........................................................Inside Back Cover
Emotia Xtreme MX
User’s Manual
68-302-02
Rev. A
79-05
Page i
Extron • Emotia Xtreme MX • User’s Manual
Legend of Icons
The following icons may be used in this manual:
___ Important information – for example, an action or a step that must
be done before proceeding.
___ A Warning – possible damage could occur.
_ A Note, a Hint, or a Tip that may be helpful.
__ Possible Electrostatic Discharge (ESD) damage could result from
touching electronic components.
__ Additional information may be referenced in another section, or in
another document.
Extron • Emotia Xtreme MX • User’s Manual
1
Chapter One
Introduction to the Emotia Xtreme MX
Introduction
Features
Specifications
Extron’s Emotia Xtreme MX
User’s Manual
Extron • Emotia Xtreme MX • User’s ManualPage 1-1
Introduction to the Emotia Xtreme MX
Introduction
About This Manual
This manual contains operation, configuration and option
information for the Emotia Xtreme MX Scan Converter.
Emotia Xtreme MX Facts and Features
Extron's EMOTIA™ XTREME MX converts up to 1600 x 1280
resolution video from Workstation-PC, MAC, SUN, SGI and
more to Composite video (NTSC/PAL), Y/C (S-Video),
Component video and RGBS. It provides a real time, high
resolution output along with professional genlock capabilities,
multi-level anti-flicker, zoom, sizing and positioning capabilities
and 21 preset input memory blocks. With digital signal
processing, the Emotia Xtreme MX also offers a full spectrum of
16 million colors. Its multiscanning capabilities provide
automatic recognition and auto-lock of scan rates between 29 to
92 kHz.
The Emotia Xtreme MX is housed in a rack-mountable metal
enclosure and includes an internal 100-240 volt switch mode
power supply.
An example of an Emotia Xtreme MX application with video
input from a workstation is shown in the diagram below.
Emotia Xtreme MX front and rear panels are shown below.
Extron • Emotia Xtreme MX • User’s Manual Page 1-2
Introduction to the Emotia Xtreme MX
Features
• Component Video Output — The Emotia Xtreme MX provides high
quality video output in the Component Video format (R-Y, B-Y, Y)
on BNC connectors.
• Horizontal/Vertical Sizing and Positioning — These controls allow
centering and sizing of the output image for optium positioning on
the display device. All images displayed through the Emotia Xtreme
MX can be displayed full-screen and without any image cropping
utilizing the sizing and shifting controls.
• Genlock — Genlock capabilities allow for the integration of the scan
converted images into a professional broadcast environment.
Genlocking provides for seamless, vertical interval switching of
these converted high resolution sources, and other video sources.
Front panel access to horizontal phasing and subcarrier phasing
control is provided for easy adjustment.
• Multiscanning — The Emotia Xtreme MX automatically recognizes
all signals from 29 kHz to 92 kHz and resolutions from 320 x 200 up
to 1600 x 1280.
• Outputs — The Emotia Xtreme MX outputs NTSC or PAL video,
Y/C (S-Video), Component Video and RGBS to fulfill any
application and offer compatibility with virtually any output source.
• Pan/Zoom — The Emotia Xtreme MX has totally variable Horizontal
and Vertical sizing controls that even allow for complete “pan and
scan” around the displayed image up to 200%. With analog control,
adjust the image position and size on screen for maximum usability.
• Presets — Recall previous settings without having to re-position or
size the image. There are twenty one different presets for sizing
and positioning of all input sources.
• Six Levels of Anti-Flicker — Although the Emotia Xtreme MX
produces extremely clear output resolution, an anti-flicker switch
has been included to ensure complete satisfaction. There are 6
levels of built in anti-flicker to fit virtually any application specifically
and significantly decrease the flicker that is inherent to interlaced
video allowing for a smooth, clean and stable image output.
Extron • Emotia Xtreme MX • User’s ManualPage 1-3
Specifications
Input Signals
Computer Compatibility .......... VGA, XGA, SUN, Silicon Graphics,
PowerPC, VESA, NeXT, PowerMAC,
Quadra, PowerBook, Radius and more.
Resolutions ............................. 320 x 200 up to 1600 x 1280
non-interlacing
Frequencies ............................ 29 to 92 kHz
Format..................................... RGsB, RGBS, RGBHV
Output Signals
Type ........................................ Composite, S-Video, RGBS, Component
NTSC ...................................... 15.75 kHz/60 Hz interlaced, 525 lines
PAL ......................................... 15.63 kHz/50 Hz interlaced, 625 lines
Connectors
Computer Input ....................... 15 HD Male
(MAC & 13W3 adapters supplied*)
Local Monitor .......................... 15 HD Female
(MAC & 13W3 adapters supplied*)
NTSC/PAL .............................. BNC Female
S-VHS ..................................... 4-pin DIN (S-Video) Female
RGBS/Component Video........ BNC Female x 4
Dimensions ............................... 19.0” W x 11.25” D x 1.74” H
48 cm W x 30 cm D x 4.4 cm H
Shipping Weight ....................... 11.0 lbs
5.0 kg
Power Supply............................ 100-240 VAC, 50/60 Hz
Internal switch mode
MTBF.......................................... 30,000 Hours
Warranty .................................... Two years, parts &labor
* See Appendix for complete list of supplied adapters.
Introduction to the Emotia Xtreme MX
Extron • Emotia Xtreme MX • User’s Manual
2
Chapter Two
Installation and Operation
Rack Mounting
Cabling
Front Panel
Rear Panel
Extron’s Emotia Xtreme MX
User’s Manual
Extron • Emotia Xtreme MX • User’s Manual
Installation and Operation
Page 2-1
Installing the Emotia Xtreme MX
If rack mounting is required it should be done before cabling,
otherwise, skip to “Cabling” below.
Rack Mounting
To rack mount the Emotia Xtreme MX, mount it as shown below
using 4-user supplied screws to secure the front panel to the
rack. Upon completion of the rack mounting procedure, go to
“Cabling” below.
Cabling
The video output from a workstation connects to the Emotia
Xtreme MX CPU INPUT connector (standard VGA 15-pin HD
Male). An adapter may be required between the workstation and
the VGA cable to the Xtreme MX (see bubble A in the diagram
below). The workstation monitor is connected to the MX
MONITOR OUTPUT connector (standard VGA 15-pin HD
Female). An adapter may be required between the monitor
cable and the MX (see bubble B in the diagram below). The
Emotia Xtreme MX is compatible with most workstations and the
following procedures cover cabling for most applications.
Indice
Altri manuali Extron electronics Convertitore multimediale
Extron electronics
Extron electronics VSC 100 Manuale utente
Extron electronics
Extron electronics Sync Converter/Stabilizer SCS 300 Manuale utente
Extron electronics
Extron electronics NAV E 511 Manuale utente
Extron electronics
Extron electronics Quantum Ultra Expansion System Manuale utente
Extron electronics
Extron electronics IN1606 Manuale utente
Extron electronics
Extron electronics DSC 301 HD Manuale utente
Extron electronics
Extron electronics CVC 100 Manuale utente
Extron electronics
Extron electronics Emotia Jr. 800 Manuale utente
Extron electronics
Extron electronics HAE 100 4K Plus Manuale utente
Extron electronics
Extron electronics MGP 641 Manuale utente
Extron electronics
Extron electronics DSC 3G-HD A Manuale utente
Extron electronics
Extron electronics NAV SD 501 Manuale utente
Extron electronics
Extron electronics 3G-AE 100 Manuale utente
Extron electronics
Extron electronics DVC 501 SD Manuale utente
Extron electronics
Extron electronics Multi Video Processor MVP 104GX Manuale utente
Extron electronics
Extron electronics TLI Pro 201 Manuale utente
Extron electronics
Extron electronics CD 900 Manuale utente
Extron electronics
Extron electronics IN1608 Manuale utente
Extron electronics
Extron electronics PIP 422 Manuale utente
Extron electronics
Extron electronics VS 200 SL Manuale utente
