Extron electronics AVTrac Demonstration Kit Manuale utente

PRELIMINARY

Setup Guide for AVTrac™Demonstration Kit

68-1530-01

Rev. B 02 09

Connectivity Box (1)

Carpet Finish

Cover Track (1)

Rubber finish

Cover Track (1)

AC Conduit (1)

Side Ramps (2)

End Ramps (2)

Base Track (1)

Pre-cut

Carpet Pieces (2)

The AVTrac Demonstration Kit shows how the AVTrac system meets customers' application needs. The kit components

can be unpacked from the carrying box as shown in the ﬁgures below. To repack the kit, reverse the steps.

NThe illustrations below show the US version of the AVTrac Demonstration kit. The International and Universal

models are similar in size and packaging, but contain a single AC outlet, which may be connected to double insulated

power cable, or ﬂex conduit without wires.

NIf the box is to be reused, remember to save

the packing foam.

2. Remove top foam and foam

covering side ramps.

3. Remove side and end ramps.

4. Remove track pieces and

connectivity box with AC

conduit.

WThis kit is for demonstration

purposes only. The AC power module is not

wired to distribute power and must not be

connected to an electrical power source.

1. Remove carpet pieces.

Setup Guide for AVTrac™Demonstration Kit, cont’d

PRELIMINARY

Extron USA - West

Headquarters

+800.633.9876

Inside USA / Canada Only

+1.714.491.1500

+1.714.491.1517FAX

Extron USA - East

+800.633.9876

Inside USA / Canada Only

+1.919.863.1794

+1.919.863.1797FAX

Extron Europe

+800.3987.6673

Inside Europe Only

+31.33.453.4040

+31.33.453.4050 FAX

Extron Asia

+800.7339.8766

Inside Asia Only

+65.6383.4400

+65.6383.4664 FAX

Extron Japan

+81.3.3511.7655

+81.3.3511.7656FAX

Extron China

+400.883.1568

Inside China Only

+86.21.3760.1568

+86.21.3760.1566 FAX

Extron Middle East

+971.4.2991800

+971.4.2991880 FAX

Ensure that the kit contains all the items shown in the ﬁgure below and assemble the kit components by following the

steps below.

NThe illustration below shows the US version of the AVTrac Demonstration kit. The International and Universal

models are similar in size and packaging, but contain a single AC outlet, which may be connected to double insulated

power cable, or ﬂex conduit without wires.

End Ramps

Cover Track w/ Rubber (shown)

or Carpet Finish

Side Ramps

Aluminum

Base

Track

Connectivity

(AAP) Box

1. Place aluminum base track on a ﬁrm, ﬂat surface.

2. Attach the side ramps by mating the tabs in the ramps with the grooves in the track.

3. Place the end ramps in position at the end of the track pieces.

4. Place the connectivity box ﬂush with the end of the track nearest the end ramps. The AC conduit should run

from the connectivity box to the opposite end of the track.

5. Attach the cover track (either rubber or carpet ﬁnish) by snapping it onto the base track.

6. Place the pre-cut carpet pieces on top of the ramps and around the connectivity box.

www.extron.com

Altri manuali Extron electronics Hardware di rete

Extron electronics

Extron electronics Architectural Interface CIA114 Manuale utente

Extron electronics

Extron electronics 1252 MS Manuale utente

Extron electronics

Extron electronics Ethernet Control Interface IPL T PCS4 Manuale utente

Extron electronics

Extron electronics Table Mountable MAAP Bay CPM200 Manuale utente

Extron electronics

Extron electronics IP Link Accessory with Four Relays IPA T... Manuale utente

Extron electronics

Extron electronics SCP 150 Manuale utente

Extron electronics

Extron electronics VERSATOOLS MTP Manuale utente

Extron electronics

Extron electronics DAS101CM Series Manuale utente

Extron electronics

Extron electronics VCA 100 Manuale utente

Extron electronics

Extron electronics Hideaway HSA 200S Series Manuale utente

Extron electronics

Extron electronics IPL M PDP-ES Manuale utente

Extron electronics

Extron electronics RGB 460xi FSR Series Manuale utente

Extron electronics

Extron electronics MD Floor Box AAP Bracket Kit AAP 100 MD Manuale utente

Extron electronics

Extron electronics MBC EVC Buffer P/N 26-448-01 Manuale utente

Extron electronics

Extron electronics HSA 222C Manuale utente

Extron electronics

Extron electronics PoleVault System PVT RGB CV MK Manuale utente

Extron electronics

Extron electronics Surface Mount Boxes SMB 101 Manuale utente

Extron electronics

Extron electronics IPL T CR48 Manuale utente

Extron electronics

Extron electronics RGB 203 Rxi VTG Manuale utente

Extron electronics

Extron electronics DAS101CM Series Manuale utente

Extron electronics

Extron electronics Architectural Interface CIA114F5 Manuale utente

Extron electronics

Extron electronics Low Profile Floor-Mount Raceway System for A/V Connectivity... Manuale utente

Extron electronics

Extron electronics AVTrac 42-122-xx Manuale utente

Extron electronics

Extron electronics IP Link IR Learner IPL T IRL Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente