eyemodule eyemodule2 Manuale utente
Digital Camera for the Handspring™Visor™ handheld
www.eyemodule.com
Copyright ©2000 Blocks Products. All Rights Reserved.
180-1005-030
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Icons and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Capturing Images . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Capturing Mini-Movies . . . . . . . . . . . . . . . . . . . . . . 8
Setting the Capture Timer . . . . . . . . . . . . . . . . . . . . 9
View Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Thumbnail Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . 16
List Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Beaming Images . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Bringing Images to Your Computer. . . . . . . . . . . . 20
Setting Preferences . . . . . . . . . . . . . . . . . . . . . . . 22
Viewing Images and Mini-Movies
on Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Bringing Images to Your Visor Handheld . . . . . . . 24
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Tips and Troubleshooting . . . . . . . . . . . . . . . . . . . 26
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Digital Camera for the Handspring™Visor™ handheld
User’s
Manual
The eyemodule™2 digital camera turns
any one of the Handspring™Visor™
handhelds into a convenient image
capture device.
Insert the eyemodule2 digital camera
into the Springboard™expansion slot
and you’re ready to capture and view
images and Mini-Movies, label them,
and beam them to other compatible
PalmOS®devices. Install the included
conduit software, and you can e-mail
and print your eyemodule2 images
from your computer. It’s fast and simple.
introduction
www.eyemodule.com 1
472.0009_manual_v3.1.qxd 1/31/01 4:15 PM Page 1
www.eyemodule.com 3
getting started
eyemodule2 user guide
2
23
To freeze the image, press once on the Capture
button next to the lens. (You may also press the
Up button on the Visor handheld to perform the
same function.)
If you want to save the frozen image, press
the Capture button, tap , or press the Up
button. If you don’t want to save it, tap
or press the Down button. Your handheld will
again display a live image.
Down buttonUp button
Insert the eyemodule2 digital camera into
the Springboard expansion slot. After a brief
introductory screen, your handheld will display
a live image.
1
Capture
button
472.0009_manual_v3.1.qxd 1/31/01 4:15 PM Page 2
eyemodule2 Capture button
Capture Timer icon
List Mode icon
Thumbnail Mode icon
View Mode icon
Mini-Movie Capture Mode icon
Image Capture Mode icon
Visor Home icon
Visor Menu icon
Up button
Down button
Tap here to downsize a Full Size image.
Tap here to open Timer screen.
Indicates that the five second limit is enabled.
This can be disabled in Preferences (page 22).
Tap here to delete the current image or Mini-Movie.
Tap here to beam the current image or Mini-Movie.
Tap here to attach a note.
Tap here to access and change information about
the current image or Mini-Movie.
Indicates your location within the set of items you
are currently viewing.
Tap here to downsize all selected Full Size images
to Palm Size.
www.eyemodule.com 5
icons and buttons
eyemodule2 user guide
4
menu bar icons
Thumbnail Mode (page 16)
View Mode (page 12)
Movie Capture Mode (page 8)
Image Capture Mode (page 6)
List Mode (page 17)
472.0009_manual_v3.1.qxd 1/31/01 4:15 PM Page 4
Tap here to select the category into which your
image will be saved.
Images are automatically named with the date
and time. A custom name can be entered via
Graffiti®before saving the image. The name can
also be changed later in View Mode or in the
Image Info screen.
Tap or press the Up button to
save the image.
Tap or press the Down button to discard
the image and return to the live preview.
Note: If you switch modes without saving the
image, the image will be discarded.
www.eyemodule.com 7
When the Capture Mode icon
( ) is selected, you are ready
to capture images.
Press here to capture an image.
Tap here to select the category into which your
images will be saved.
Tap here to change the size of the image
being saved:
Palm Size =160x120 pixels
Full Size = 640x480 pixels (full VGA)
This area displays the approximate number of
images that can be saved at the current image
size setting.
Tap here to set the Capture Timer (page 10).
You may also press the Up button to capture
an image.
eyemodule2 user guide
6
capturing images
472.0009_manual_v3.1.qxd 1/31/01 4:15 PM Page 6
After the Mini-Movie has been captured,
it is played back in a continuous loop
on the screen until it is either saved
or discarded.
Mini-Movies are automatically named with the
date and time. A custom name can be entered via
Graffiti before saving the Mini-Movie. The name
can also be changed later in View Mode or in the
Image Info screen.
Tap here to select the category into which the
Mini-Movie will be saved.
Tap or press the Up button to save
the Mini-Movie and return to the live preview.
Tap or press the Down button to discard
the Mini-Movie.
Note: Only a color Handspring handheld will capture
color Mini-Movies. B&W Visor handhelds can only
capture B&W Mini-Movies.
www.eyemodule.com 9
eyemodule2 user guide
8
capturing mini-movies
In Movie Capture Mode ( ), you
can record short movies on your Visor
handheld. You can then view them in
View Mode or bring them to your computer
as QuickTime™ movies.
Press the capture button to start and stop filming.
Tap here to select the category into which the
Mini-Movie will be saved.
The current maximum Mini-Movie length is indicated
here, based on the remaining memory.
The five second limit can be removed by tapping the
Visor Menu icon, selecting “Preferences” from the
Options menu, and then unchecking the “Limit Filming
to 5 seconds”option.
Tap here to set the Capture Timer (page 11).
Alternatively, you can start and stop filming by
pressing the Up button. Pressing the Down button
cancels filming.
Note: Mini-Movie capture consumes a lot of memory.
Keep your movies short to save memory space.
472.0009_manual_v3.1.qxd 1/31/01 4:15 PM Page 8
In Movie Capture Mode, the Capture
Timer can be used to start filming after
a certain amount of time has elapsed.
Change this number to set the delay time before
filming begins.
Filming will stop if any of the following happens:
—Pressing the Capture button.
—Pressing the Up button
—Pressing the Down button (cancels filming)
—Five second limit is reached (if limit is on)
—Memory becomes full
Note: The Mini-Movie Capture Timer is not able to
capture multiple Mini-Movies.
www.eyemodule.com 11
When in Image Capture Mode, you can
open the Timer screen by tapping the
Capture Timer icon ( ). You then have
the option of having a simple 10 second
delay or doing multiple timed captures.
Tap here to capture one image after a
10 second pause.
Change these numbers to set up your own
image-capture sequence.
Tap here to enable or disable the capture beeps.
Note: The Timer will turn the Visor handheld back
on to perform each capture if the time between
captures exceeds Visor auto-off time. If your
Visor handheld runs out of memory during the
sequence, it will stop capturing images.
setting the capture timer
eyemodule2 user guide
10
472.0009_manual_v3.1.qxd 1/31/01 4:16 PM Page 10
mini-movies
You can edit the Mini-Movie name and
category directly from View Mode.
Tap here to play the Mini-Movie. When a
Mini-Movie is initially displayed, the first frame
will be shown.
Tap here to pause the Mini-Movie.
Tap here to go to the previous or next image or
Mini-Movie.
The handle on the progress bar can be dragged
with the stylus to move forward or backward
within the Mini-Movie. It can also be played
in slow motion by tapping and holding on the
slider track.
Tap here to turn looping on and off.
www.eyemodule.com 13
When the View Mode icon is selected,
you will be able to view saved images
and Mini-Movies.
images
Tap here to attach a note to the image.
Tap the Info icon to open the Image Info
screen (page 15).
Tap here to go to the previous or next image
or Mini-Movie.
Tap the Beam icon to beam the current image
to another compatible PalmOS®device (page 18).
Tap the Delete icon to delete the current item.
You can also press the Up or Down buttons to
view the previous or next image or Mini-Movie.
view mode
eyemodule2 user guide
12
472.0009_manual_v3.1.qxd 1/31/01 4:16 PM Page 12
The image name can be edited.
The image category can be changed.
Tap here to attach a note to the image.
www.eyemodule.com 15
In View Mode, tap on the Visor’s Menu icon
to access the Options menu. Then select
“Slide Show”.
Tap the screen (or press the Up or Down button)
to stop the slide show and return the Visor
handheld to View Mode.
slide show
The Slide Show option automatically
plays all the images and Mini-Movies
in the current View Mode category.
image info/notes
Tapping on the Info icon ( ) from the View
Mode will open the Image Info screen.
eyemodule2 user guide
14
472.0009_manual_v3.1.qxd 1/31/01 4:16 PM Page 14
Indice
Altri manuali eyemodule Macchina fotografica digitale
