EyeTech DSS 4-30 Series Manuale utente
1
USER GUIDE MANUAL
GOLDENEYE INSTALL GUIDE MANUAL
DVR User Manual
-
D
S
S
4-30,
1
6-30,
1
6-60,
4-
1
20
series
- DSS 16-120, 16-240, 16-480, 5000 series
Digital Video Recorder System
Eyetech Digital International Phone ; 909-989-1040
8491 Lemon Ave. Fax ; 909-941-3144
Alta Loma, CA. 91701 Web site; WWW.eyetechdigital.com
2
USER GUIDE MANUAL
CONTENTS
Introduction
Precaution before Installation
Warranty Sheet
Warranty Contents
Checking List
NOTICE
System General ------------------------------
System Features ---------------------------
Main Function -----------------------
Monitoring Mode -----------------------------
Monitoring Mode Explanation ------------------
Pan/Tilt Control Method -----------------------
Function Setting Methods ----------------------
6
6
6
7
8
9
10
10
Way of Function Converting -------------------
General Setting----------------------------
Camera Setting -----------------------------
Motion & Display Setting ----------------------
Network Setting -----------------------------
11
12
16
17
18
20
Sensor Setting ------------------------------
User Setting -------------------------------
Save ------------------------------------
20
21
21
24
25
28
29
Searching Mode ------------------------------
Searching Mode Conversion & Methods ---------
Multi searching way --------------------------
Searching screen Button Explanation ------------
Motion Searching Way------------------------
How to use Book Mark -----------------------
Data Saving Way----------------------------
30
32
Log Viewer -----------------------------------
Event Backup --------------------------------
Image Tool ----------------------------------
Backup -------------------------------------
Manual Backup Method -----------------------
35
36
37
Auto Backup Method -------------------------
Backup Viewer --------------------------------
DVR Installation ------------------------
Front & Back part of the System ----------------
Capture Card Connection and Receiver ----------
Sensors & Relays Connector Pin Spec (KIT) --------
Back I/O B/D with Sensors & Relays (SET) ---------
Pan/Tilt Camera Protocol ---------------------
Sound Setting for Audio ----------------------
37
39
42
43
43
44
45
45
46
47
1
1.1
1.2
2
2.1
2.2
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
4
4.1
4.2
4.3
4.4
4.5
4.6
5
6
7
8
8.1
8.2
9
10
10.1
10.2
10.3
10.4
10.5
10.6
3
USER GUIDE MANUAL
Products Introduction
DSS 430, DSS 1630, DSS 1660, DSS 4120, DSS 16120, DSS 16240, DSS 16480, DSS 5000, GED
(Golden Eye) are Eyetech series.
Thanks for choosing our products. This manual includes DVR system program setting methods,
functions, features & pan/tilt control connection.
1. Refer to manual before installation; put the power “ off” before connecting.
2. Make an enough room for the line.
Precaution before Installation
* Please read carefully before you use it.
* Basic function is same even though it is various according to model.
3. Do not install this around the place where there is magnetic, direct light
Heating equipment. (In use temperature 5℃~35℃)
4. Install this onto stable place and well-ventilated place.
5. Do not put the heavy objects on this.
6. Do not break this product into pieces.
* Please check the power out if 110/220 voltage.
4
USER GUIDE MANUAL
Warranty Contents
Warranty Introduction
We guarantee that we will repair and exchange defective products when there
are any Defaults on our products under this paper.
If our products break down within 1Year under the manual condition, we
should repair it without any charge. (Expect under the uncontrolled condition)
Chargeable cases as follows;
1. Breaking down or damage from user’ s mistakes.
2. If you do not keeps our instruction according to this manual.
3. If you do not use recommendable power level or frequency.
4. If it needs disassembling typed-cleaning or consuming components.
Model
Serial no
Purchasing place/Tel
Date of purchase
Warrantee period
NAME
ADDRESS
CUSTOMER
TEL
5. If some other people repair or amend this equipment without our
permission.
When the warrantee period passes, small amount of charge will be added for
repairing.
⊙ This paper will not be reissued.
⊙ Please confirm the contents of this when you purchase this products.
⊙ Please show us this paper when you need to get repairing.
5
USER GUIDE MANUAL
Checking List
zMONITOR (OPTION) - Resolution 1024 * 768,
60Hz True Color, +32bit
zDVR SYSTEM (Digital Video Recorder System)
SET Base
zS/W CD (Main B/D, VGA CD included)
zUser manual
zPower Cable
zKey Board, Mouse
Please check if you have all the items as follows and if you find some other material
missing, contact the purchasing place.
(Option: Monitor, Audio Input Cable, Network connecting Cable)
zRack fixing Bracket , HDD fixing Rack(If HDD is more than two, there is no fixing Rack)
zKey Board
zNetwork changing cable, Serial Port Connecting Cable(In case of PTZ Cam: Option)
6
USER GUIDE MANUAL
1.2 Main Function
1.1 System Features
1 S
y
stem General
This system makes analogue signal into digital signal and save it in HDD, then search
those information when you need. This is what we called DVR (Digital Video Recorder)
1) System Stability
Two – Way Audio, Network, Remote monitoring through Modem (PSTN) are our special
features.
Searching, Displaying, Transmitting are being done at the same time.
5) Superior network function expansion
Very clearly.
4) Convenient user interface
For the user’s convenience, we let the users operate only with mouse clicking.
Saving the clean image when the event happens, so you can see the recording image
3) Excellent Screen Quality
For the security reason, we only permitted only authorized users to search our data.
So we maximize HDD space and minimize disk access time.
We developed the most suitable file system and prevented disk piece in advance,
2) System File System
We spent more than 4 Years to make our systems stabilized.
- Maximum 16ch divided Live Video Monitoring
- 30 ~480 fps/second recording (JPEG, MPEG4)
- Control of recording speed & compression way
by each camera
- Main File System adaptation
- RMS (LAN, PSTN, ISDN)
- Search & Data backup (DAT, DVD, ADR, DLT,
and CDR/W)
- Motion detection function
- Self Control Function (Watch Dog)
- Remote notification (Hand Phone, E-mail)
- Voice recording
- Multi-Level Password
- PAN/TILT
[Configuration]
7
USER GUIDE MANUAL
Information display part
(1) Date and Time
(2) Sensor & Alarm, RMS, Backup
(3) Saving degree
(Oldest Basket saving data)
Search and Control Part
Screen control part
(4) 1, 4, 6, 9, 10, 16 division
(5) Maximum screen
(6) Converting to next camera
(7) Automatic group
(8) PAN TILT CONTROL
(9) Exit button
Camera information display part
(10) Camera shows the current status of camera
Standby recording on record not using
< How to use Mouse >
1) Screen conversion
- Temporary screen clicking makes screen one division screen.
- Division screen depends on how many screen users want to use.
(As soon as you choose, turns out to be blue)
- If you put auto screen conversion button, Camera group is changing continuously.
- This is the same as click next camera (next group)
2) Full screen
- If you click full button, it turn out to be full screen.
- Click right mouse button makes it turn to previous screen.
< Pop up >
- When you move your mouse, advice for pop up displays.
2 Monitorin
g
Mode
Search conversion Log Viewer function setting Event Backup
8
USER GUIDE MANUAL
2.2 Pan/Tilt Control Method
1. PAN/TILT Setting Method
When you watch the video and control the view scope of camera or it can be possible to
control focus in/out & zoom in/out.
This is different according to Receiver (refer to Appendix Receiver)
(1) Click setting -> Put the ID & Password, click “OK” -> select the camera in setting mode.
(2) ‘Camera Setting’
... Example: Pan/Tilt Receiver is Pelco D (Pelco D, 2400, NONE, 8, 1)
-> Select No.1Camera
-> Check in “use” on Pan/Tilt
-> Select ‘Pelco D’ among the Receiver item.
-> Select ID (ID is Pan/Tilt’s No)
-> Select Speed, Port, Parity, Data Bits, stop Bits list. (2400, NONE, 8, 1)
-> Click ‘OK’
-> Click ‘Save and Exit’
Pan/Tilt Receiver is Pelco D
Pelco D, 2400, NONE, 8, 1
Caution during Pan/Tilt operation
Pan/Tilt Receiver has various of model and protocol. Please check if there is such a
kind of receiver. If this does not work, there might have some problem on line
connection or new upgraded version protocol.
ID is Pan/Tilt’s Number.
9
USER GUIDE MANUAL
2. How to use Pan/Tilt
(1) Click ‘Pan/Tilt’ button, and put ‘ID’ & ‘Password’
(2) Color turns into blue when it is being used.
(3) Click the icon. You can change following (left/right) icon.
(4) You can check out all direction with Zoom In/Zoom Out button
also.
< Explanation on Controller >
Camera power button/Light power button
Zoom In/ Zoom Out button
Focus In/ Focus Out button
Auto Pan button
3. How to use Preset
< Adding preset >
(1) Click the preset ( ) button.
(2) Control the P/T button to where you want to move.
(3) Click the right button and put the ‘Add Preset’
(4) Put the explanation of preset.
< Go to preset >
(1) Click the preset ( ) button.
(2) click the right button at the number, which you
want, and put the ‘Go to Preset’.
10
USER GUIDE MANUAL
3.1 Way of Function Converting
(The shape of icon before/ after)
(1) Click the Setup button.
(2) Put ID & Password.
*REF: Please make sure that nobody except
operator changes this setting mode.
Logging in is made only when operator put ID
& Password.
(3) After logging in, Setting window as left
shows up. This is made of sixth Setting Parts
& two Saving Parts.
- Setting Part: General (System), Camera,
Motion & Display, Network, Sensor & Alarm,
and User
- Saving Part: Save & Exit, Exit without Save
Questo manuale è adatto per i seguenti modelli
7
Indice
