Ezviz CP4 Manuale utente

Attention

• Do not expose the camera to the harsh environment like high temperature, humid, salt mist or rain, otherwise, the device

may be damaged.

• Do not press the sensor or lens of the camera, otherwise, the device may be damaged.

• Do not pull the wire of the camera hard, and protect yourself from being cut by the wire. Damage to the wire due to

inappropriate operation is not included in the warranty.

• Use the exclusively power adapter to charge the panel, otherwise, the system may be damaged.

Box Content

Model A:

Model B:

Model A:

Model B:

Panel (x1) Mounting Base (x1) Camera (x1) Buckle (x1)

* Base Cover (x1) Screws (x6) Power Cord (x1) Regulatory Information (x2)

Quick Start Guide (x1)

* The base cover is only sold together with model A, it's not included with model B.

Model A and Model B differ only in the mounting structure. Since they provide the same

features and performance, you can use either Model A or Model B normally.

The appearance of product and accessories are subject to the one you have bought.

Overview

Panel

Micro SD Card Slot

Home Button

Power Port

Touch Screen

LoudspeakerData Interface

Name Description

Home Button • Hold the Home Button for 3 to 5 seconds to

power up or off the device.

• Press the Home Button to light up or off the

screen.

Camera

Sensor

Bell

Sensor

Loudspeaker

Lens

Microphone

Do not block the sensors.

Mounting Base

Model A

Mounting Hole

Data Wire Hole

Hook

Model B

Mounting Hole

Data Wire Hole

Hook

Hook is for hanging portable charger.

Get the EZVIZ App

-Connect your mobile phone to Wi-Fi using your 2.4GHz network (suggested).

-Download and install the EZVIZ app by searching “EZVIZ” in the App Store or Google PlayTM.

-Launch the app and register an EZVIZ user account.

EZVIZ App

If you have already used the app, please make sure that it is the latest version. To find out if an update is available, go to the app

store and search for EZVIZ.

Setup

Follow the steps to set your peephole:

1. Install your peephole and power on.

2. Log in to your EZVIZ app user account.

3. Connect your peephole to the Internet.

4. Add your peephole to your EZVIZ account.

Installation

1� Install the Micro SD Card (Optional)

-InsertthemicroSDcard(soldseparately)intothecardslotasshowninthegurebelow.

-In the EZVIZ app, tap the Storage Status in the Device Settings interface to check the SD card status.

-If the memory card status displays as Uninitialized, tap to initialize it. The status will then change to Normal and it can

store videos.

2� Install the peephole

This document provides two mounting methods for different appearance, please choose the corresponding mounting

method according to the product you purchased.

Model A

If you already have a peephole, install the device in the same place. If not, please drill a hole of diameter about 14mm (no more

than 45mm) and about 145cm distance from the ground to have a good viewing effect.

Measure the door's thickness and select the appropriate screws.

Thickness Screw

35 to 60mm

60 to 85mm

85 to 105mm

Turn the screws into the back of

camera.

Tear off the release paper. Pass screws and wire through the

door. You can roll up the paper to help.

Adjust camera's position and push

it close to the door gently.

Take out the base, plug the

connector into the slot on the

bottom of the base and put the

base cover on.

Pass screws through the mounting

holes.

Adjust the mouting base's position

and tighten the screws.

Put the wires in th groove and

insert the buckle.

Slide the panel into the mounting

base.

Installation completed. Remove the

sticker.

Model B

If you already have a peephole, install the device in the same place. If not, please drill a hole of diameter about 16.5mm (no

more than 45mm) and about 145cm distance from the ground to have a good viewing effect.

Measure the door's thickness and select the appropriate screws.

Thickness Screw

35 to 60mm

60 to 85mm

85 to 105mm

Turn the screws into the back of

camera.

Tear off the release paper. Pass screws and wire through the

door. You can roll up the paper to help.

Adjust camera's position and push

it close to the door gently.

Take out the base, and plug the

connector into the slot on the

bottom of the base.

Pass screws through the mounting

holes.

Adjust the mouting base's position

and tighten the screws.

Put the wires in th groove and

insert the buckle.

Slide the panel into the mounting

base.

Installation completed. Remove the

sticker.

Power on

Hold the power button for 3 to 5 seconds to power on the

panel.

Language Choose

简体中文

Magyar

English

Tap the Home button below to next stop,

tap the Power button left to confir m

Tap the touch screen to choose your language.

ezviz_xxxxx

ezviz_yyyyy

ezviz_zzzzz

Before using, connect to network

Select Wi-Fi of your router, and enter password.

Cannot find Wi-Fi of your router?

Follow the wizard to select your Wi-Fi and enter password.

Add to EZVIZ App

- Log in the EZVIZ app.

- On the Home screen, tap “+” on the upper-right corner to go

to the scan QR code page.

- Scan the QR code.

If you failed to get the QR code or want to reconfigure Wi-Fi,

please tap Settings -> Firmware on the touch screen to see QR

code.

Charge the Panel

Power Outlet

Power Adapter

Connect the panel with the power outlet via power adapter (5V

2A, sold separately).

• Do not charge through the interface at the bottom.

• You can also charge the panel via portable charger and hang

it on the hook.

• Please do not charge the device when the temperature

exceeds 45 degrees or below 0 degrees.

Restore to Factory Settings

Tap Settings -> Firmware -> Default and cofirm to restore the device to factory settings.

All configuration will be restored to factory

settings. Continue?

Cancel Confirm

Live View

The app interface may be different due to version update, and the interface of the app you installed on your phone shall prevail.

Launch the EZVIZ app, tap Live View botton, you can view and listen to a live feed, take snapshots, record videos, and choose

video definition as needed.

Swipe left and right across the screen to see more

icons.

Icon Description

Share. Share your device.

Settings. View or change the device settings.

Snapshot. Take a snapshot.

Record. Manually start/stop recording.

Speak. Start using talk and listen.

Definition. Select video resolution from Ultra HD, Hi-Def or Standard.

Call Log. View call logs.

Multi-screen Live. Tap to select live view window layout.

Please refer to the actual interface for specific information.

Settings

In the settings page, you can set the parameters of the device.

Parameter Description

Name Customize the name of your device.

Working Mode

• User Mode: Customize parameters like detection sensitivity and loitering duration

• Performance Mode: Under this mode, the device performance will be improved, but the

power consumption will be increased.

• Power Saving Mode: Adjust the sensitivity and other parameters to extend battery life.

• Super Power-saving: Sleep Mode is on. Active live view can wake up the camera.

• Configure Working Mode: Customize the working mode in different periods.

Intelligent Detection

You can customize the detection notification by changing the value of detection sensitivity.

The higher sensitivity is, the easier people farther to the device can be detected.

• Basic Detection(Required)

• PIR Infrared Detection: Higer sensitivity, farther detectable distance.

• Human Shape Detection: Higer sensitivity, farther detectable distance.

• Advanced Detection

• Loitering detection: when enabled, if people keep loitering around the doorway for

longer than the period you have set up, alarms will be triggered. This function is

used to avoid loitering.

Devices will alert based on the selected mode, including device-side alerts and App-side message

notifications.

Notification You can set the notification from the device-side and app-side.

Audio When disabled, both live view and record videos will not have audio.

Image

• Auto(Recommended): Auto-Switch Day/Night Mode.

• Day and Night Switch Sensitivity.

• Enforcing Day Mode: IR mode stays off

• Enforcing Night Node: IR mode stays on, with clear images in dark environment.

Light When disabled, the doorbell indicator will be off.

Battery You can see the battery capacity.

Cloud Storage You can subscribe and manage the cloud storage.

Record List You can see the device storage status, include cloud storage and memory card.

Security Settings • Video Encryption: When enabled, your videos will be encrypted.

• Change Encryption Password: You can change your password.

Network

• You can see the Wi-Fi that the device has connected to, and you can tap to change to

another Wi-Fi.

• Static DNS: If enabled, you can customize the DNS address.

• Wi-Fi Sleep Mode: You can choose the Wi-Fi Sleep mode.

• Low Power Mode

• Ultra-Low Power Mode

Device Information You can see the device information here.

Share the Device Enter an email address or phone number to invite and grant device permissions to a family

member or guest.

Delete Device Tap to delete the camera from your EZVIZ account.

EZVIZ Connect

1� Use Amazon Alexa

These instructions will enable you to control your EZVIZ devices with Amazon Alexa. If you run into any difficulties during the

process, please refer to Troubleshooting.

Before you start, make sure that:

1. EZVIZ devices are connected to the EZVIZ app.

2. In the EZVIZ app, turn off the "Image Encryption" in the Device Settings page.

3. You have an Alexa-enabled device (i.e Echo Spot, Echo-Show, All-new Echo-Show, Fire TV (all generations), Fire TV stick

(second generation only), or Fire TV Edition smart TVs).

4. The Amazon Alexa app is already installed on your smart device, and you have created an account.

To Control EZVIZ devices with Amazon Alexa:

1. Open the Alexa app and select "Skills and Games" from the menu.

2. OntheSkillsandGamesscreen,searchfor"EZVIZ",andyouwillnd"EZVIZ"skills.

3. Select your EZVIZ device's skill, then tap ENABLE TO USE.

4. Enter your EZVIZ username and password, and tap Sign in.

5. Tap the Authorize button to authorize Alexa to access your EZVIZ account, so that Alexa can control your EZVIZ devices.

6. You will see "EZVIZ has been successfully linked", then tap DISCOVER DEVICES to allow Alexa to discover all your EZVIZ

devices.

7. Go back to Alexa app menu and select "Devices", and under devices you will see all your EZVIZ devices.

Voice Command

Discover a new smart device via the "Smart Home" menu in the Alexa app or the Alexa Voice Control function.

Once the device is found, you can control it with your voice. Speak simple commands to Alexa.

Your device's name for example: "show xxxx camera," can be changed in the EZVIZ app. Each time you change the name of the device, you

will need to discover the device again to update the name.

Troubleshooting

What should I do if Alexa fails to discover my device?

Check if there are any Internet connecting problems.

Try to restart the smart device and re-discover the device on Alexa.

Whythedevice'sstatusis"Ofine"onAlexa?

Your device might have been disconnected from the network. Restart the smart device and re-discover on Alexa.

Check if your router is connected to the Internet and try again.

For details about countries where Amazon Alexa is available, see Amazon Alexa's official website.

2� Use Google Assistant

With the Google Assistant, you can activate your EZVIZ device and watch live by speaking Google Assistant voice commands.

The following devices and apps are required:

1. A functional EZVIZ app.

2. In the EZVIZ app, turn off the "Image Encryption" and turn on the "Audio" in the Device Settings page.

3. A TV with functional Chromecast connecting to it.

4. The Google Assistant app on your phone.

To get started, follow the steps below:

1. Set up the EZVIZ device and make sure it works properly on the app.

2. Download the Google Home app from the App Store or Google Play StoreTM and log into your Google account.

3. On the Myhome screen, tap “+” on the upper-left corner, and select "Set up device" from the menu list to go to the Set up

interface.

Indice

Manuali Macchina fotografica digitale popolari di altre marche

Mercury

Mercury 350K Manuale utente

Pentax

Pentax Optio LS 465 Manuale utente

Sanyo

Sanyo VPC-S1085 Manuale utente

GE SMART A1255 Manuale utente

Point Grey

Point Grey Gazelle Manuale utente

Nikon

Nikon COOLPIX A Manuale utente

Pentax

Pentax P-5 Manuale utente

BlazeVideo

BlazeVideo A280 Manuale utente

Sony

Sony MCA-20 Manuale utente

Sony

Sony Alpha DSLR-A290 Manuale utente

ATIK Cameras

ATIK Cameras One Manuale utente

CohuHD Costar

CohuHD Costar 3930 Series Manuale utente

Leica

Leica M10-R Manuale utente

FujiFilm

FujiFilm FinePix A700 Manuale utente

Lorex

Lorex LNZ81P25 Series Manuale utente

GE J1470S Manuale utente

Sony

Sony A6700 Guida utente

Canon

Canon EOS ELAN7 Manuale utente