Ezviz T9C Manuale utente

Any and all information, including, among others, wordings, pictures, graphs are the properties of

Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”). This user manual (hereinafter

referred to as “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or

wholly, by any means, without the prior written permission of EZVIZ. Unless otherwise stipulated,

EZVIZ does not make any warranties, guarantees or representations, express or implied, regarding to

the Manual.

About this Manual

The Manual includes instructions for using and managing the product. Pictures, charts, images and

all other information hereinafter are for description and explanation only. The information contained

in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please

find the latest version in the ™ website (http://www.ezviz.com).

Revision Record

New release – January, 2023

Trademarks Acknowledgement

™, ™, and other EZVIZ’s trademarks and logos are the properties of EZVIZ in various

jurisdictions. Other trademarks and logos mentioned below are the properties of their respective

owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH

ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,

AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,

MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND

NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS,

EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR

INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,

BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH

THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL

LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT.

EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS

THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A) IMPROPER

INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR

PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT

LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG

OTHERS.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY

AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK,

VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE

TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND DATA PROTECTION

LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION

BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE

APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH

ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER

PREVAILS.

Table of Contents

Overview ��1

1� Package Contents �� 1

2� Basics �� 2

Get the EZVIZ App��4

Add Your Siren to EZVIZ��4

Method One: Add by Scanning QR Code�� 4

Method Two: Add by the Gateway �� 5

Select Appropriate Location��7

1� Installation Diagram �� 7

2� Valid Distance Testing �� 7

Siren Installation ��8

Select Power Supply�� 8

Install Siren �� 9

Replace Batteries�� 10

Alarm Test ��11

Operations on the EZVIZ App ��12

1� Live View�� 12

2� Settings�� 13

Intelligent Linkage��15

Method 1 Automatic device linking �� 15

Method 2 Manually device linking�� 15

Maintenance��16

Specification ��16

Battery Information ��17

INFORMATION FOR PRIVATE HOUSEHOLDS ��18

Smart Siren (hereinafter referred to as Siren) is an alerting device with a sound volume of up to

105dB. Equipped with a bright LED indication and pre-installed batteries, Siren can be quickly

installed, set up and operated on EZVIZ App.

The device is set up via EZVIZ App for iOS and Android. The system notices users of all events

through push notifications.

Overview

1� Package Contents

Smart Siren (x1) Mounting Base (x1) Drill Location Template (x1)

Pre-installed CR123A

Battery (x4) Screw Kit (x1) Regulatory

Information (x1) Quick Start Guide (x1)

• All device's appearances are subject to the one you have bought.

• All figures in this user manual are for reference only.

2� Basics

LED Indication

Buzzer

Front View

Rubber Layer

Mounting Holes

Wiring Groove

Back View

Mounting Base

External

Power Supply

Connection

Terminal

Buckle

(x4)

Lock Groove

(x4)

Power

Button

Binding

Post

Power Button

Press and hold for 2s Power on and enter network configuration mode by default

*After powered on, if the Siren does not connect to the gateway,

itwill be auto-off 3 minutes later.

Press once under standby mode Connected with the gateway well and the current ZigBee signal

refreshed

Disconnected with the gateway and retry to connect

Double tap under standby mode Enter alarm test mode

Press and hold for 5s Restore to factory settings and enter device adding mode

Press and hold for 10s Power off

LED Indication

Fast-flashing red Enter network configuration mode

Fast-flashing red with 3s beep Alarm test mode

Fast-flashing red with alarm sound Intrusion alarm/tamper alarm/motion alarm triggered

Off Power off/standby mode

Buzzer

One beep Power on/enter network configuration mode

Long beep Shutting down

Alarm sound Alarm test works/alarm triggered

Power Port

(If battery supply is not your choice) You can connect the Siren to external power with DC 12V 1A or

above specifications.

Get the EZVIZ App

1. Connect your mobile phone to Wi-Fi (suggested).

2. Download and install the EZVIZ app by searching for “EZVIZ” in the App Store or Google PlayTM.

3. Launch the app and register an EZVIZ user account.

EZVIZ App

If you have already used the app, please make sure that it is the latest version. To find out if an

update is available, go to the app store and search for "EZVIZ".

Add Your Siren to EZVIZ

The Siren should be used along with EZVIZ ZigBee Smart Gateway (afterinafter referred to

as "gateway"). Please add gateway to the EZVIZ by referring to the gateway user manual, and

then add the Siren to the gateway.

Method One: Add by Scanning QR Code

1. Log in to your account through EZVIZ app, tap the device adding icon and then the QR code

scanning interface will be displayed.

2. Scan the QR code on the back of the Siren or on the cover of the user manual.

Scan QR Code

3. Press and hold the Power Button for 2s (for rst network connection and under Siren shutting

down state) or Press and hold the Power Button of the Siren for 5s (under standby mode) to

make the Siren enter device adding mode, and the LED Indication is fast-ashing red.

4. Add the Siren to the gateway by following the wizard on the App.

5. After successfully add the Siren to App, please create new routine by linking your EZVIZ smart

devices to the Siren for a complete using experience. (For related intelligent linkage operations,

please refer to “Intelligent Linkage“ part in this user manual)

Intelligent linkage is necessary for you to use the Siren, a separate Siren can not provide a complete

alarm service for you.

Method Two: Add by the Gateway

When adding Siren by the gateway, place the Siren as close to the gateway as possible.

1. Press the function key of the gateway once to make the gateway enter device adding mode,

and the LED Indication is in slow-ashing white.

2. Press and hold the Power Button for 2s (for rst network connection and under Siren shutting

down state) or Press and hold the Power Button of the Siren for 5s (under standby mode) to

make the Siren enter device adding mode, and the LED Indication is fast-ashing red.

3. There will be a voice prompt reminding you that the Siren has been added to the gateway

automatically, and at the same times, the LED indication is off and you can view the addded

Siren on your EZVIZ App.

• If the LED indication is off and no Siren showed on your App, which means the Siren is failed

to be added to the gateway, please press and hold the Power button for 5s to enter network

configuration mode.

• If you want to delete the Siren, please choose either of the following methods to clear the

matching relationship between the Siren and the gateway:

- Enter detailed page of the Siren on your EZVIZ App and then delete the Siren;

- Press and hold the Power Button of the Siren for 5s until the LED frame is fast-flashing red

to reset and then delete the Siren from the gateway.

4. After successfully added the Siren to your App, please link your EZVIZ smart devices to the

Siren for a complete using experience. (For related intelligent linkage operations, please refer to

“Intelligent Linkage“ part in this user manual)

Select Appropriate Location

Installation Cautions

• Recommended install the Siren under the roof.

• To avoid the happenness of dangers, please fix the Siren securely when install it on walls.

• Do not install the Siren near metal objects and mirrors (they can interfere with the RF signal and

cause it to fade).

• To ensure that connection between the gateway and the Siren is stable, please refer to the

following installation diagram and place the gateway near the Siren.

• There should be as fewer metal obstacles and walls as possible between the gateway and the

Siren. Recommended place both of the Siren and gateway near the window or on same floor.

• If you need to link the sub-devices on multiple floors, we recommended you place one gateway for every

floor for a stable connection.

1� Installation Diagram

The location of the siren depends on its remoteness from the gateway, and obstacles hindering the

radio signal transmission: walls, floors, large objects.

For more installation suggestions, please refer to the following figure.

Available Position

Conrming by actual

installation environment

Not recommended Position

Gateway

Siren

2� Valid Distance Testing

After select an installation location, please make sure the Siren is keeping a valid communication

distance with the gateway by doing a signal strength test.

Please open EZVIZ App and enter the device detail page, and then tap Signal Strength on the top

of the page to test signal strength for finding an optimal installation position.

Siren Installation

• Before installation, make sure that there the wire insulation is not damaged.

• Be careful to straighten the external power supply wires at the connect exit of the mounting

base to avoid too many wires piling up between the mounting base and the Siren body, so

that affecting the subsequent Siren mounting.

• When leading out the external power supply wires, please adjust the appearance of rubber

layer if there is any edge warp.

• When using external power supply, the Siren is powered on by external supply and the pre-

installed batteries will not work.

Select Power Supply

1. Battery Supply (Recommended)

Four batteries are pre-installed for the Siren.

2. External Power Supply (DC 12 V 1A or above specications)

• Poke the rubber layer of the mounting base through with a needle-like tool (the same size as the

diameter of the external power supply wire) to lead out the external power supply wires;

• Connect external power supply wires to binding post on the back of the Siren.

Indice

Altri manuali Ezviz Sistema di sicurezza

Ezviz

Ezviz T9 Manuale utente

Ezviz

Ezviz T9 Manuale utente

Ezviz

Ezviz T3 Manuale utente

Ezviz

Ezviz Home Sense Manuale utente

Ezviz

Ezviz A1 Manuale utente

Ezviz

Ezviz CS-X5-108T Guida alla risoluzione dei problemi

Ezviz

Ezviz C3A Manuale utente

Ezviz

Ezviz CS-W2D Manuale utente

Ezviz

Ezviz T9 Manuale utente

Ezviz

Ezviz BC1-B2 Manuale utente

Ezviz

Ezviz T3C Manuale utente

Ezviz

Ezviz EZ Wireless Kit Manuale utente

Ezviz

Ezviz Home Sense Manuale utente

Ezviz

Ezviz T9 Manuale utente

Ezviz

Ezviz T9 Manuale utente

Ezviz

Ezviz T3C Manuale utente

Ezviz

Ezviz A1 Manuale utente

Ezviz

Ezviz A1 Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente