Faber PB80/85 Manuale utente
78
Installation and User manual:
Model
Installation and User’s manual PB - GB
Subject to technical changes
Installation TopFix / RecessFix [R1]
Do not damage the product when using a sharp knife to open
the packaging! Fitting screws: Use a size-2 screwdriver (PO-
ZIDRIVE) or use an electric screwdriver at it’s lowest torque.
Rail removal: Use a at screwdriver of max. 6 mm wide. Only
use the original screws enclosed, to prevent malfunctioning
from using too thick screw heads!
xx
x
x
y
max. 35 cm
max. 35 cm
xx
max.
35 cm
X = 5 cm
y
C
B
A
A
B
2
Clip installation (bottom rail)
1
Clip installation (high rail)
3
Installation sequence
3-A1 3-A2
3-B/C1 3-B/C2
Rail installation sequence on Clips
4
Tensioning/slackening the steel wire
C
A
B
A
BC
Removal
5
Operation
Note: if necessary, before clicking the rail
into place, slacken the steel wire. After
clicking, place cover on the bottom clips.
Push rmly to the right/left to tension/slacken
the steel wire
0 - 80 cm
81 - 115 cm
116 - 150 cm
3
4
5
var
var
var
1
1
1
var
var
var
Product width Number of parts
[R1]
21-03-2014
PB80/85
PB81/86
79
Installation and User manual:
Model
Installation and User’s manual PB - GB
Subject to technical changes
FaceFix installation to a window frame / wall [F1]
Do not damage the product when using a sharp knife to open
the packaging! Fitting screws: Use a size-2 screwdriver (PO-
ZIDRIVE) or use an electric screwdriver at it’s lowest torque.
Rail removal: Use a at screwdriver of max. 6 mm wide. Only
use the original screws enclosed, to prevent malfunctioning
from using too thick screw heads!
xx
x
x
max. 35 cm
max. 35 cm
xx
max.
35 cm
X = 5 cm
C
B
A
A
B
3 var var var 1 var var
4 var var var 1 var var
5 var var var 1 var var
0 - 80 cm
81 - 115 cm
116 - 150 cm
1
Clip installation (toprail)
2
Clip installation (bottom rail)
3
Fitting the covers
4
Installation sequence
5
Tensioning/slackening the steel wire
4-A1 4-A2
4-B/C1 4-B/C2
Rail installation sequence on Clips
C
A
B
A
BC
Removal
6
Operation
Note: if necessary, before clicking the rail
into place, slacken the steel wire. After
clicking, place cover on the bottom clips.
Push rmly to the right/left to tension/slacken
the steel wire
Number of partsProduct width
[F1]
21-03-2014
PB80/85
PB81/86
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Faber Tenda per finestra
Manuali Tenda per finestra popolari di altre marche
Domondo
Domondo PureNight Manuale di istruzioni per l'installazione
rollease acmeda
rollease acmeda Easy Spring Air Guida all'installazione
IKEA
IKEA KADRILJ Manuale utente
Hallis Hudson
Hallis Hudson Rolls Super glide Manuale utente
Benthin
Benthin P1614 Manuale utente
MV LINE
MV LINE CLARA 015 Manuale di istruzioni
