Fabric Lumabeam Guida
fabric.cc/user-guides
1x light 1x USB cable1x mount 1x strap
LUMABEAM
USER START GUIDE
What’s in the box?
Charging
1. Make sure light is turned OFF
2. Connect the light to your PC via the USB cable or
charge it via a wall outlet with a 5V USB adaptor (not included).
The light button glows red during charging, and turns off when fully charged.
The on button will glow red to warn you when only 15% of charge remains.
Fully charge
light before
use
Charging time: 5hrs
Full power
Med power / Longer burn time
Fast flash / Increase burn time
Flash / Maximum burn time
Warning
Store device in a cool dry area.
Do not shine directly into the eyes.
Keep out of reach of children or pets.
Do not short- circuit the charger or the battery.
Do not use or handle the device while charging.
Never crush or puncture the battery.
Never place the battery or device on, or in, heating units.
Do not dispose of battery or device in a fire.
Fully charge the light/battery before use if not used for over 3 months.
Led Type 1x Cree XP-E LED
+ 4x bright LEDs
Output Lumen Full -- 300 lumen
Med -- 60 lumen
Fast flash -- 10HZ
Slow flash -- 3HZ
Light angle 50-60 degrees
Run time
(Main LED)
Full - 2hrs
Med - 3hrs
Fast flash - 6hrs
Flash - 6hrs
Run time
(Top LED)
Full - 6hrs
Med - 14hrs
Fast flash - 46hrs
Flash -- 58hrs
Battery type 3.7V, 650 Lithium
polymer battery
Battery
indicator
The indicator will glow
red when charge is
below 15%
Charging Micro USB charging
Charging
indicator
The button glows red
during charging, and
turns off when fully
charged.
Waterproof
level
IPX5
Drop test 1 Metre
Switch Power button +
indexed dial
Certifications CE, ROHS
1/
2/
3/
4/
Warranty
Fabric product is covered by a warranty of ONE YEAR commencing at date of purchasing from
an authorized Fabric dealer. This warranty does not cover faults caused by deliberate damage,
violent impact or unauthorized dismantling. Warranty service should only be undertaken by
your retailer and from there, the distributor in your region. If you attempt to repair or modify the
product by yourself, it will not be covered by warranty. Prior to returning, please contact your
Fabric Authorized Service Provider (place of purchase). All returned products must be packed
carefully. Please enclose the warranty certificate (Proof of purchase) together with a detailed
description of your claim.
On / Off / Function
Rotate dial
Change function
Press
Change light source
Hold
On / Off
3 light sources: Main light / White LED / Red LED
Main beam has 4 functions: Full / Med / Fast flash / Flash
Assembly / Removal
The Lumabeam is ready to go. To assemble, place the rubber
base unit of the mount in position on the bicycle. Attach
two ends of the rubber strap to the front two prongs of the
rubber mount. Stretch the remaining end of the strap to the
remaining prong. Click to secure the light into the mount.
To remove the FL300 from mount, turn the light clockwise.
Altri manuali Fabric Accessori per biciclette
