Fagor VNP400 Manuale utente
FAGOR AUTOMATION, S. Coop. Ltda. reserves the right to modify the
contentsofthismanualwithoutpreviousnotification.
INDEX
1. CONFIGURATIONOFTHEDROMODELVNP400
1.1 Structure of the VNP400 1
1.2 Dimensions and installation 3
1.3 Front Panel 4
1.4 Rear Panel 6
1.4.1 Connectors and connections 7
1.4.1.1 Connectors X1, X2, X3, X4 7
1.4.1.2 Connector X5 8
2. MACHINEANDPOWERCONNECTION
2.1 Power connection 1
2.2 Machine interface 2
2.2.1 General considerations 2
2.3 Set-up 4
2.3.1 General considerations 4
2.3.2 Connection 4
2.4 Reference systems 5
2.4.1 Absolute and incremental coordinates 5
2.5 Start-up 6
2.6 Homesearch 11
2.7 Zerooffsets 13
2.8 Coordinate preset 14
2.9 Tool compensation 16
2.10 Troubleshooting 18
3. MACHINEPARAMETERS
3.1 Introduction 1
3.2 Operation with machine parameters 2
3.3 Setting machine parameters 4
3.3.1 Generalparameters 4
3.3.2 Parameters for the axes 7
3.3.3 Parameter Reset 14
4. DROMODEOFOPERATION
4.1 Special mill model functions 3
4.1.1 Part centering 4
4.1.2 DrillIng in a linear pattern 6
4.1.3 Drilling in circle (bolt hole pattern) 8
4.2 Special lathe model functions 10
4.2.1 Cone calculation 11
4.2.2 RPM calculation 13
4.3 Tool compensation 15
4.3.1 Tool table 16
4.3.2 Deletion of the tool table 17
4.4 Calculator function 18
4.5 Clock function 20
5. PROGRAMEDITING
5.1 Introduction 1
5.2 Program editing 2
5.2.1 Block editing 4
5.2.2 Contents of a block 6
5.3 TEACH-INprogramming 8
6. PROGRAMEXECUTION
6.1 Introduction 1
6.2 Operation 2
7. PERIPHERALCOMMUNICATIONS
7.1 Receive and send programs 2
7.2 Receive and send the tool table 4
7.3 Receive and send machine parameters 6
7.4 Probing 9
APPENDICES
ATechnical characteristics of the VNP400 2
BRecommended probe connection diagrams 4
CMachine parameter summary 5
DMachine parameter setting chart 7
EPossible power-up errors 12
Chapter: 1 Section: Page
CONFIGURATIONOFTHEDROMODELVNP400 1
1. CONFIGURATIONOFTHEDROMODELVNP400
1.1 STRUCTURE OF THE VNP400
TheFAGORVNP400DROisanenclosedandcompactmodulehavingonitsfrontpanel:
*A CRT monitor used to display the required system information.
*AkeyboardtocommunicatewiththeDROin order torequestinformationbymeans
of commands or alter the status of the DRO by generating new instructions.
The rear panel contains all the connectors necessary for machine and power interface.
Front panel of the VNP400
STRUCTUREOFTHEVNP400
Page Chapter: 1 Section:
CONFIGURATIONOFTHEDROMODELVNP400
2
Rear panel of the VNP400
STRUCTUREOFTHEVNP400
Chapter: 1 Section: Page
CONFIGURATIONOFTHEDROMODELVNP400 3
334
310
323
63,5
63,5
185
53
53228
334
192
8
184
13
M5
0 20
1.2 DIMENSIONS AND INSTALLATION
ThisDROisatable-topmodelanditshouldbeinstalledsotheoperator’seyesarealigned
with the DRO monitor.
Ithas fourlegs screwedon tothe bottomwith a5mm insidethread inorder tobe fastened
to a supporting plate or base.
FAGORAUTOMATIONoffersandoptionalDROsupportingbracketespeciallydesigned
for the VNP 400 DRO.
Dimensionsinmillimeters
DIMENSIONS
Page Chapter: 1 Section:
CONFIGURATIONOFTHEDROMODELVNP400
4
X1.500
Y-29303.2150
DEGREF1 TOOL02ABS MM
X -12.2530 Y 2.5150
Z0.2150 W 135.9470°
Z 1234.567
W -22.000
2
RESET
X
RESET
Y
RESET
Z
RESET
W
ABS/INC
1.3 FRONT PANEL
Thispanelmaybeconsideredtobedividedintotwofunctionallydifferentareas:TheCRT
monitor and the keyboard.
The monitor is divided into two display areas or windows:
1.- Main window.
Dependingontheselectedoperatingmode,thiswindowwilldisplayallthenecessary
information.
2.- This display area shows the different options which can be selected by means of
softkeys F1 thru F5.
ThekeyboardareawhichallowscommunicationswiththeDROconsistsofthefollowing
keys:
Numeric keyboardwith the 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, . and ± keys. To enter signed Or
unsignedinteger and decimal values.
To access the help system from any operating mode.
When the help information takes more than one page, the symbol will
appear at the top of the screen and at the bottom indicating that these
keys must be pressed to view the previous or next page respectively.
Also the keys may be used to scroll the text up or down line by line.
1
FRONTPANEL
Chapter: 1 Section: Page
CONFIGURATIONOFTHEDROMODELVNP400 5
FRONTPANEL
Press again to exit from the help mode.
To access the main menu anytime.
Toggles the display of the work units of the rotary axes.
DEG Displays the positions in 0.0001 degree units. ie: 129.3900°
DMS Displays the positions in degrees, minutes and seconds. i.e: 120° 23' 24'’
Toggles the display of the work units of the linear axes.
Cancels the last character sequence entered.
Used to validate commands and data previously altered or generated.
Cancelsthe last character entered.
It is used to enter a position value directly when in TEACH-IN mode and when
assigningvaluestospecifictables.
To access the previous option, function or table.
To access the next option, function or table.
When pressing one of these keys and depending on the selected
operatingmode,theDROwilldisplaythepreviousornextfield,option,parameter
or block being edited.
SOFT-KEYS or function keys to select the different options shown on the screen.
Page Chapter: 1 Section:
CONFIGURATIONOFTHEDROMODELVNP400
6
1.4 REAR PANEL
The rear panel of the DRO consists of the following elements:
X1, X2, X3 and X4 9-pin male SAP type connectors for axis feedback connections.
One axis per connector admitting either square or sine wave signals.
X5 9-pin female SUB-D type connector for the RS 232C and probe connection.
1.- Lithium battery for memory back up when the DRO power is off.
2.- Identification label of the VNP400.
3.- Two3.15A/250VfusesforA.C.powerprotection(oneperphase).theiridentification
label is located on the fuse lid.
4.- A.C. power on/off switch.
5.- A.C. power connector for A.C. and ground connection.
6.- Brightnesspotentiometer for theCRTmonitor.
7.- Metric6mm groundterminal forgeneralmachine grounding.
REARPANEL
Indice
Altri manuali Fagor Lettura digitale
