Fagor SPM Manuale utente

version. 0303 - in.-

- SPM - AC SPINDLE MOTOR

Títle: AC Spindle Motor: [ SPM Series]

Type of documentation: Description and installation of SPM motors:

Association with spindle modular drives SPD and compact

SCD drives.

Name - model -: SPM motor manual - in.-

Version: 0303 - in -

Electronic document: SPM.pdf

Headsquarters: FAGOR AUTOMATION S.COOP.

Bº San Andrés s/n, Apdo. 144

C.P. 20500 ARRASATE - MONDRAGÓN

www.fagorautomation.com

info@fagorautomation.es

Phone: 34 - 943 - 719200

Service phone : 34 - 943 - 771118

The information described in this manual may be subject to changes due to

technical modifications. FAGOR AUTOMATION S.Coop. reserves the rigth to

change the contents of this manual without prior notice.

transcribed, stored in a backup device or translated into another language

without Fagor Automation‘s permission.

DECLARATION OF CONFORMITY

Manufacturer: Fagor Automation S.Coop.

Barrio de San Andrés s/n; C.P. 20500, Mondragón - Guipúzcoa - SPAIN.

We hereby declare, under our responsability that the product:

Fagor Servo Drive System

consisting of the following modules and accesories

Power Supplies: XPS-25, XPS-65, PS-25A, PS-25B3, PS-25B4, PS-65A and APS-24

Modular Drives: AXD / SPD 1.08, 1.15, 1.25, 1.35, 2.50, 2.75, 2.85,3.100, 3.150,3.200

Compact Drives: ACD / SCD 1.08, 1.15, 1.25, 2.50, 2.75

Modular positioning Drives: MMC 1.08, 1.15, 1.25, 1.35, 2.50, 2.75, 3.100, 3.150.

Compact positioning Drives: CMC 1.08, 1.15, 1.25, 2.50, 2.75

Accessory Modules: RM-15, ER, CM - 1.60, CHOKES and DDS PROG MODULE

Power Supply Filter: EMK 3040, EMK 3120

Motors: Brushless AC Fagor AXM, FXM and FKM

and Spindle Asynchronous Fagor SPM and FM7

mentioned on this declaration, meet the requirements:

SAFETY:

EN 60204-1: Machine safety. Electrical equipment of the machines.

ELECTROMAGNETIC COMPATIBILITY:

EN 61800-3: EMC directive for servo drive systems.

EN 61000-4-2: Electrostatic discharges.

EN 61000-4-3: [ 26 MHz to 1000 MHz ] - Radiated radio frequency electromagnetic

fields -.

EN 61000-4-4: Burst and fast Transients.

EN 61000-4-5: Power surges.

According to the European Directives 73/23/EEC on Low Voltage [modified by the 93/68/EEC directive] 98/37/CEE

on Machinery Safety and 92/31/CEE on Electromagnetic Compatibility. [EN 61800-3: 1996, Specific Regulation on

Electromagnetic Compatibility for Servo Drive Systems].

In Mondragón, March 1 st, 2003

WARRANTY TERMS

iii

INITIAL WARRANTY:

All products manufactured or marketed by FAGOR carry a 12 - month warranty for the end user.

In order to prevent the possibility of having the time period from the time a product leaves our

warehouse until the end user actually receives it run against this 12 - month warranty, the OEM or

distributor must communicate to FAGOR the destination, identification and installation date of the

machine by filling out the Warranty Form that comes with each product.

The starting date of the warranty for the user will be the one appearing as the installation date of

the machine on the Warranty Form.

This system ensures the 12 . month warranty period for the user.

FAGOR offers a 12 - month period for the OEM or distributor for selling and installing the product. This

means that the warranty starting date may be up to one year after the product has left our warehouse

so long as the warranty control sheet has been sent back to us. This translates into the extension of

warranty period to two years since the product left our warehouse. If this sheet has not been sent to

us, the warranty period ends 15 months from when the product left our warehouse.

FAGOR is committed to repairing or replacing its products from the time when the first such product

was launched up to 8 years after such product has disappeared from the product catalog.

It is entirely up to FAGOR to determine whether a repair is to be considered under warranty.

EXCLUDING CLAUSES:

The repair will take place at our facilities. Therefore, all shipping expenses as well as travelling

expenses incurred by technical personnel are NOT under warranty even when the unit is under

warranty.

This warranty will be applied so long as the equipment has been installed according to the

instructions, it has not been mistreated or damaged by accident or negligence and has been handled

by personnel authorized by FAGOR.

If once the service call or repair has been completed, the cause of the failure is not to be blamed the

FAGOR product, the customer must cover all generated expenses according to current fees.

No other implicit or explicit warranty is covered and FAGOR AUTOMATION shall not be held

responsible, under any circumstances, of the damage which could be originated.

SERVICE CONTRACTS:

Service and Maintenance Contracts are available for the customer within the warranty period as well

as outside of it.

Fagor Automation S.Coop

SPM motor manual

To ensure a long life for the spindle AC motor, read carefully the procedures

described in the CONTENTS section.

This user manual contains detailed documentation about SPM series motors and

their related spindle AC drives.

CONTENTS

NOTES FOR SAVE OPERATION ........................v

1. NOTES ON USE................................................. vi

2. STORAGE...........................................................vii

3. TRANSPORTATION............................................vii

4. INSTALLATION ..................................................viii

5. WIRING............................................................... ix

6. OPERATION ........................................................x

7. MAINTENANCE AND INSPECTION ...................x

GENERAL PRECAUTIONS

• This manual may be modified when necessary because of improvement of the product, modifica-

tion or changes in specifications.

• To order a copy of this manual if your copy has been damaged or lost, contact your FAGOR repre-

sentative.

• FAGOR is not responsible for any modification of the product made by the user since that will void

our guarantee.

Fagor Automation S.Coop

SPM motor manual

NOTES FOR SAVE OPERATION

Read these instructions throughly before use of AC SPINDLE MOTOR. In these

instructions, NOTES FOR SAVE OPERATION are classified as and

Indicates a potencially hazardous which, if not avoided, may result in death or

serious injury to personnel.

Indicates a potencially hazardous situation which, if not avoided, may result in

minor or moderate injury to personnel and damage to equipment. It may also be

used to alert against unsafe practices.

Even item described in may result in a vital accident in some

situations. In either case, follow these important notes.

The following shows the symbols of [ PROHIBITION ] and [ MANDATORY ]

action.

Specifies prohibited handling.

Specifies actions that must be taken.

After reading these instructions, keep it readily available for these using the

equipment.

Fagor Automation S.Coop

SPM motor manual

1. NOTES ON USE

• Observe the following items to avoid electrical shock or injury.

• Ground the ground terminals of the inverter and the motor (or ground the metal-

lic part such as frame in case of no ground terminal) according to local and/or

national electrical codes.

Failure to observe this warning can result in electrical shock.

• User grounding wires of a size complying with relevant international or local

standards.

• Do not damage the cables or apply excess stress; do not place heavy objects

on the cables or clamp the cables.

Failure to observe this warning can result in electrical shock.

• Use only the specified combinations of the inverter and the motor.

Failure to observe this caution may result in fire or malfunctions.

• Use the shortest cables possible. Separate the power cables from the signal

cables. The noise in the cable may cause the equipment to vibrate or run

improperly.

• Never use at locations exposed to water splashes, corrosive and inflammable

gases, or near combustible substances.

Failure to observe this caution may result in fire or malfunctions.

• Use under the following environmental conditions:

[1] Indoors where no corrosive or explosive gas exists.

[2] Well - ventilated without dust or metallic particles.

[3] Ambient temperature from 0°C to +40°C and free from freezing.

[4] Humidity from 20% to 80% [non - condensing].

[5] Altitude 1000 metres above sea - level.

[6] Easy to check, clean and maintain.

For use at locations where the excessive water or oil splashes exist, use a

cover or other protection. It is recommended to place the terminal box upward.

Fagor Automation S.Coop

SPM motor manual

vii

2. STORAGE

3. TRANSPORTATION

• Do not store the equipment in locations where water splashes are

present or where there is corrosive gases or liquids.

• Store the motor horizontally and guarded against any possible blows.

Make sure that no strange objects get into it through the cooling

system.

• Store the equipment protected from direct sunlight in the specified

range of temperature and humidity: [AC Spindle motor: 0°C to +60°C,

5% and 95% RH ].

• No maintenance is needed on the bearings while the motor is stored.

• The motor shaft should be turned a few revolutions every 2 or 3

months.

• Do not lift the cables or the motor shaft when carrying the equipment.

Ignoring this point may cause personal damage or improper operation

due to damage to the motor.

• Do not load the products excessively.

Failure to observe this caution may result in collapse of cargo and

personal injury.

• Use the motor eyebolts exclusively for lifting and transportation of the

motor. Do not attempt to move when other equipment is attached to

the motor.

• Before lifiting or moving it, make sure that the eyebolts are securely

screwed, the load is well balanced and the cable or chain used to

move the motor is the right one.

Fagor Automation S.Coop

SPM motor manual

viii

4. INSTALLATION

• Do not climb up on the motor or place heavy objects on it.

Failure to observe this caution may result in personal injury.

• Do not block the air inlet and outlet, and do not let foreign materials enter.

Ignoring this point may cause fire and damage to the unit.

• When unpacking, be careful of the nails in the wood frame.

Failure to observe this caution may result in personal injury.

• Cover the rotary parts so as not to touch them.

Failure to observe this warning can result in personal injury..

• The motor shaft extension is coated with anticorrosive paint. Before installation, wipe

off the paint with a cloth soaked in detergent liquid.

• When connecting the motor to a load machine, be careful with centering, belt

tension and pulley parallelism.

• For coupling with the load machine, use a flexible coupling.

• The feedback device [ encoder ] joined to the shaft is a precision unit. Do not apply

too pressure onto its output shaft. Design machines so that the thrust load and

radial load applied to the motor shaft extension during operation should be within the

allowable range described in the manual of each model.

• Never make any additional machining to the motor.

Indice

Altri manuali Fagor Motore

Fagor

Fagor FXM1 Series Manuale utente

Manuali Motore popolari di altre marche

Rotax

Rotax 125 senior MAX evo Manuale utente

Kohler

Kohler K361 Manuale utente

MTD

MTD OHV Series Manuale utente

Kohler

Kohler COMMAND CH18-745 Manuale utente

Mercury

Mercury D4.2L D-Tronic Manuale utente

Selve

Selve SE Plus-RC Series Manuale utente

Perkins

Perkins 1206E-E66TA Manuale utente

Skov

Skov DA 174 Manuale

Rossi

Rossi TX11 Series Manuale utente

Siemens

Siemens SIMOTICS T-1FW3 Foglio di istruzioni

AL-KO

AL-KO PRO 350 Manuale utente

MTU

MTU 12 V 4000 Lx4 Manuale utente

Nanni

Nanni N3.30 Manuale di istruzioni

Nanni

Nanni N5.160 CR2 Manuale utente

KSB

KSB SuPreme Series Istruzioni per l'installazione

Hiwin

Hiwin EM1 Series Manuale utente

Rotax

Rotax 912 i series Istruzioni operative

Siemens

Siemens SIMOTICS XP 1MB1 Manuale utente