Fanmaster Masterfilter ASP-500-MF2 Manuale utente

FA NM A ST E R

cooling heating ventilation extraction

INSTRUCTION MANUAL

MODEL: ASP-500-MF2

MASTERFILTER AIR SCRUBBER PURIFIER

TO PREVENT SERIOUS INJURY, READ & UNDERSTAND ALL WARNINGS &

INSTRUCTIONS BEFORE USE. PLEASE KEEP THIS DOCUMENT FOR YOUR RECORDS

SCAN ME

FOR YOUR INFORMATION

Thank you for purchasing a Fanmaster Masterlter air scrubber purier. Please read this

instruction manual carefully before using this appliance.

Disclaimer:

Fanmaster reserves the right to make alterations to specications, quantities,

dimensions, for production or other reasons, subsequent to publication.

While we believe the information is accurate and complete, we make no warranty

or representation for any particular purposes. The information is offered in good faith

and with the understanding that any use of the units or accessories in breach of the

directions and warnings in this document is at the sole discretion and risk of the user.

Disposal Guidelines:

Do not dispose of this product with general household waste. This product must be

disposed according to the laws governing Waste Electrical and Electronic Equipment.

If required, contact your local authorities for information regarding the available

disposal facilities.

1. GENERAL SAFETY RULES & WARNINGS

• PLEASE READ INSTRUCTIONS CAREFULLY.

• PLACE INSTRUCTION MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. DO NOT ALLOW

ANYONE WHO HAS NOT READ THESE INSTRUCTIONS TO ASSEMBLE, ADJUST OR OPERATE THIS

APPLIANCE.

• IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE OR EXPLOSION

MAY RESULT IN CAUSING PROPERTY DAMAGE, SERIOUS INJURY OR LOSS OF LIFE.

• FAILURE TO COMPLY WITH THE PRECAUTIONS AND INSTRUCTIONS PROVIDED WITH THIS

APPLIANCE, CAN RESULT IN DEATH, SERIOUS INJURY AND PROPERTY LOSS OR DAMAGE FROM

HAZARDS OF FIRE, EXPLOSION, BURN, ASPHYXIATION, AND/OR ELECTRICAL SHOCK.

• ONLY PERSONS WHO CAN UNDERSTAND AND FOLLOW THE INSTRUCTIONS SHOULD USE OR

SERVICE THIS APPLIANCE. IF YOU NEED ASSISTANCE OR REQUIRE INFORMATION SUCH AS AN

INSTRUCTION MANUAL, LABELS, ETC. CONTACT FANMASTER.

• DO NOT STORE OR USE GASOLINE, PETROL OR ANY OTHER FLAMMABLE OR COMBUSTIBLE

VAPORS AND LIQUIDS IN THE VICINITY OF THIS APPLIANCE.

• THE ELECTRICAL SYSTEM TO WHICH THE APPLIANCE IS CONNECTED MUST COMPLY WITH

LOCAL REGULATIONS. A RESIDUAL-CURRENT DEVICE (RCD) MUST BE INSTALLED.

• UNPLUG THE APPLIANCE BEFORE PERFORMING ANY MAINTENANCE OPERATIONS.

• ALWAYS CHECK THE POWER CABLE BEFORE USING THE APPLIANCE. IT MUST NOT BE BENT,

TAUT, STRETCHED, CRUSHED OR ANY WAY DAMAGED.

• IF THE POWER CORD AND/OR PLUG IS DAMAGED, IT MUST BE REPLACED BY FANMASTER, A

SERVICE AGENT OR A QUALIFIED PERSONS.

• DO NOT LEAVE THE APPLIANCE UNATTENDED WHEN IN USE.

• NEVER USE THE APPLIANCE WITH WET HANDS OR WHEN EITHER THE APPLIANCE OR THE POWER

CABLE IS WET.

• CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE APPLIANCE.

• THE APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WITH

REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES, OR LOCK OF EXPERIENCE &

KNOWLEDGE.

• PLEASE MAKE SURE ALL PLASTIC PACKAGING IS REMOVED FROM ALL FITLERS BEFORE

OPERATION.

• THIS APPLIANCE CONTAINS A UV EMITTER. DO NOT STARE AT THE LIGHT SOURCE.

• DO NOT USE AN ADAPATER WITH THIS APPLIANCE.

• BREATHING HAZARD - WHEN USING THIS APPLIANCE IN A CONTAINMENT AREA, ALWAYS

TURN OFF POWER TO OPEN COMBUSTION APPLIANCES SUCH AS FIREPLACES, FURNACES,

WATER HEATERS & HVAC SYSTEMS TO AVOID THE RISK OF BACK-FLOW CARBON MONOXIDE

FUMES.

• IF THE FILTER CHANGE LIGHT ILLUMINATES DURING THE REMEDIATION PROCESS, IMMEDIATELY

CHANGE THE HEPA/ACTIVATED CARBON FITLER.

• TIPPING HAZARD - ONLY STACK THIS UNIT IN STORAGE, NOT IN USE. DO NOT STACK MORE

THAN TWO (2) UNITS ON TOP OF EACH OTHER.

• THIS APPLIANCE IS NOT DESIGNED TO BE CONTINUOUSLY USED 24 HOURS 7 DAYS A WEEK AS

IT WILL SHORTEN THE PRODUCT LIFE.

FOR YOUR INFORMATION

2. PRODUCT DESCRIPTION & SPECIFICATIONS

PRODUCT DESCRIPTION

Industrial air scrubber purier designed to remove particles from the air and

surrounding surfaces and odours.

SPECIFICATIONS

MODEL ASP-500-MF2

Air Flow (L/s) (CFM) 241

Rated Power 0.21KW

Voltage (V/Hz) AC220-240V/50

Current Rating (A) 0.87

Plug Connection 3 Pin 10amp

Cable Length (m) 5

Filters

1st stage: G4 Pleated Disposable Cardboard Filter

2nd stage: H13 HEPA Filter

UV-C Light Sterilisation

Filter Size (mm) Pre Filter: 290x290x22

H13: 280x280x105

Fan Dia (mm) 220

Air outlet Dia (mm) 197

Filtered Aream (m2) up to 40

Fan Speed Variable

Hour Meter Yes

Filter Replacement/Clean

Indicator Light Yes

Noise (dBa) 78

Weight (kg) 15.5 / 17

Product Dimensions (mm) (W)438x(D)328x(H)412

Packaged Dimensions (mm) (W)505x(D)390x(H)465

• When the unit total working time adds up to 2000 hours, the lter warning light will

ash with an alarm on the control panel. (To reset the machine, push the UV-C

light switch 3 times continuously in 5 seconds after Reset the lter service time)

• UV-C sterilization lamp fault detection function: when the UV-C sterilization lamp

does not work, the alarm will keep ringing.

3. GETTING TO KNOW YOUR APPLIANCE2. PRODUCT DESCRIPTION & SPECIFICATIONS

4. HOW IT WORKS

The ASP-500-MF2 works by drawing the contaminated air into the air inlet which

passes through a 2 stage ltration process that removes 99.97% of airbourne particles

and is then sterlised with a UV-C Light.

The clean ltered air is then expelled back out via the air outlet. It removes dust

particles and other airborne contaminants that carry mould spores, germs,

viruses from the air and surrounding surfaces. The ASP-500-MF2 is tted with a lter

replacement indicator which will light up when the HEPA lter needs to be replaced.

Two (2) stage ltration & UV-C Light proces:

1st Stage: Pre-lter G4 Pleated Disposable Cardboard Filter - captures initial dust &

allergen particles.

2nd Stage: H13 HEPA Filter - captures even smaller particles, up to 0.3 microns. Helps

control and prevent the growth of bacteria and mould. Capturing 99.97% of dust &

allergen particles.

UV-C Light: UV-C Light sterlises the ltered air. UV-C technology works by deactivating

the DNA of mircoorganisms like bacteria & viruses disrupting their ability to multiply &

spread.

USES

• Air purifcation

• Dust control

• Odour control

• Remediation & Restoration works (wate, re & mould damage)

APPLICATIONS

• Constructions sites

• Ofces

• Commerical - hotels, kitchens

• Warehouses, workshops, factories

• Rental/Hire

5. USES & APPLICATIONS

6. ASSEMBLY & OPERATING INSTRUCTIONS

4. HOW IT WORKS 6. ASSEMBLY & OPERATING INSTRUCTIONS

ASSEMBLY

There is minimal assembly required. REMOVE PLASTIC PACKAGING FROM FILTERS -

open the cover via releasing the two (2) latches and remove the plastic packaging

from all lters. Failure to do so will cause risks or damage to the appliance. The

appliance will not work.

OPERATING INSTRUCTIONS

1. Place the appliance so that it is in an upright vertical position (placed on the

rubber feet).

2. Connect the plug to the relevant power source.

3. Open the air inlet cover on the opposite side of the control panel (lters)

4. Turn the appliance on by turning the Variable Speed Control.

5. To turn appliance off turn the Variable Speed Control anti-clockwise.

Remove the appliance from the carton. If the appliance is damaged, please

contact Fanmaster or where you purchased the appliance from.

CONTROL PANEL

Variable Speed Control - controls the air ow (clockwise to increase)

Hour Meter - indicates the running time of the unit

UVC On/Off - controls the UV-C Lamp

Change HEPA Filter - indicates when to replace/clean the HEPA Filter

7. CLEANING, MAINTENANCE & STORAGE

• Before starting any maintenance task, shut down, unplug the appliance.

• Do not attempt any electrical repair yourself. If the appliance needs service or

repair, contact a qualied person.

• When cleaning, make sure that water does not enter the unit.

• Do not open the enclosure to clean the inner parts. Do not spray water into the

appliance.

• Never use solvents, gasoline, toluene and similar aggressive chemicals to clean

the appliance.

Regularly wipe the enclosure using a soft sponge or cloth. For very dirty parts, use a

sponge wetted with lukewarm water and a mild detergent, then dry using a clean

cloth. Clean or replace the lters as required. Check the power cord and plug for

any damages, if damaged replace the cord or plug immediately by a qualied

person only.

STORAGE

• Clean the unit before storing for long periods of time.

• Keep stored inside.

• Maximum stack of 2 units.

8. WIRING DIAGRAM

9. TROUBLESHOOTING

PROBLEM CAUSE SOLUTION

No Power

Plug is loose or not

connected correctly Check plug connection

Faulty or damaged power

cord Check & replace

No air ow Filters are blocked Replace lters

Air inlet or outlet is blocked Check for bloackages

UV-C Lamp not

working

Drain pipe is clogged Clean out drain pipe

Faulty Replace

Not positioned correctly Check placement

• When the unit total working time adds up to 2000 hours, the lter warning light will

ash with an alarm on the control panel. (To reset the machine, push the UV-C

light switch 3 times continuously in 5 seconds after Reset the lter service time)

• UV-C sterilization lamp fault detection function: when the UV-C sterilization lamp

does not work, the alarm will keep ringing.

10. WARRANTY

Any claim under this warranty must be made within 12 months of the date of

purchase of the product. To make a claim under the warranty, take the product

(with proof of purchase) to the store where you purchased the product or go to

https://www.fanmaster.com.au/support.

This warranty is given by Fanmaster Pty Ltd

ABN: 45 353 934 457

Unit 1/6-8 Yalgar Rd, KIRRAWEE NSW 2232

P: 1300 900 345

E: [email protected]

This warranty is provided in addition to other rights and remedies you have under law:

Our goods come with guarantees which cannot be excluded under the Australian

Consumer Law. You are entitled to replacement or refund for a major failure and

to compensation for other reasonably foreseeable loss or damage. You are also

entitled to have the goods repaired or replaced if the goods fail to be of acceptable

quality and the failure does not amount to a major failure.

Exclusions: This warranty does not cover:

• Any defects caused by an accident, misuse, abuse, improper installation or

operation, lack of reasonable care, unauthorized modication, loss of parts,

tampering or attempted repair by a person not authorized by the distributor.

• Any product that has not been installed, operated or maintained to a

satisfactory level.

• Any damage caused by improper power input or improper cable connection.

Indice

Altri manuali Fanmaster Purificatore d'aria

Fanmaster

Fanmaster ASP-500-MF3 Manuale utente

Manuali Purificatore d'aria popolari di altre marche

IKEA

IKEA UPPÅTVIND Manuale utente

Nash

Nash AP-1 PureSmart Manuale utente

LG PH-U450 Series Manuale utente

DeLonghi

DeLonghi DDSX 220WFA Manuale utente

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Manuale utente

Sharp

Sharp FU-40SE Manuale utente

Philips

Philips AC2721 Manuale utente

Hitachi

Hitachi EP-A3000 Manuale utente

TruSens

TruSens Z-2000 Manuale utente

Motorola

Motorola MBP87SN Manuale utente

Beko

Beko ATP 7100I Manuale utente

Carrier

Carrier INFINITY 1620 Manuale utente

AtmosAir

AtmosAir P2002 Manuale utente

Winix

Winix NK300 Manuale utente

Friedrich

Friedrich C-90A Istruzioni per l'uso e l'installazione

Surgically Clean Air

Surgically Clean Air JADE2.0 Manuale utente

Base aire

Base aire 555 Pro Manuale utente

Champion

Champion CP25 Manuale utente