Fantec MR-35DUF Manuale utente

FANTEC

MR-35DUF

USER MANUAL

Rebuild POWER

MENU ............................................................................................................................1

1. Product Introduction .............................................................................................................. 2

2. Operation ............................................................................................................................... 3

3. NOTE 14

4. Features ............................................................................................................................... 14

5.Package contents 19

2.1 USB Interface ........................................................................................................................ 6

2.1.1 JBOD MODE ...................................................................................................................... 6

2.1.2 BIG MODE .......................................................................................................................... 7

2.1.3 RAID0/FAST MODE ........................................................................................................... 8

2.1.4 RAID1/SAFE MODE ........................................................................................................... 9

2.1.5 Partitioning Volumes ......................................................................................................... 10

2.2 Firewire interface ................................................................................................................... 14

....................................................................................................................................

4.1 High speed external storage solution,USB2.0 480Mb/s, Firewire 400/800Mb/s..................... 14

4.2 Serial ATA HDD ................................................................................................................... 15

4.3. Four Working Mode ........................................................................................................... 15

4.4 Support system Windows 2000/XP/VISTA & Mac os 9.0 or above version ............. 17

4.4.1 System Expansion for Windows ....................................................................................... 17

.....................................................................................................................

Front

Back

1. Product Introduction

SATA HDD 2 to USB 2.0/ Firewire interface.×

POWER

Rebuild

2. Operation

Note:Sway from side to side the lock at the instructed point , which you could

open the doorknob to install/ unload the hard disk. In Contrast, when you sway from

side to side the lock at the instructed point , then you may not open it.

The Hard Disk Installation:Sway from side to side the lock , and pull the

doorknob to insert 1 or 2 hard disk.Close the doorknob and the installation will be

completed (The step will be represented in terms of following graphs)

to AC90-240V

Firewire400PorttoPChost

Firewire 800 sPor t to PC host

E-SATA

USB

AC 90V-240V

Connect to the computer host through USB or Firewire and turn on the power

(Instruction will be presented in the following graph). Please do not connect USB

and Firewire at the same time!

Turn the switch to RAID0, LED will keep bright and the host will be entering the

RAID0 active status.

Turn the switch to RAID1, RAID1 LED keep bright, and the host will be entering

the RAID1 active status.

Turn the switch to JBOD, JBOD LED keep bright, and the host will be entering the

JBOD active status.

Turn the switch to BIG, BIG LED will keep bright, the host will be entering the BIG

active status.

Hard disk LED " "/" " sends blue light and has long-lasting bright light, which

indicates the hard disk connection is correct.

Hard disk LED " "/" " sends the pink light and does not stop glittering, which

indicates the hard disk performing wrong material transmission.

Hard disk LED " "/" " sends red light and does not stop glittering, which

indicates the hard disk connection error.

USB 2.0 Port to PC Host

LED condition:

switch on power and insert two HD in terms of different working pattern

Switch on power then insertion HD or two HD have a damage in the situation

under the different working pattern the LED condition (HDD1 normal, HDD2 is

unusual, otherwise also establishes)

PATTERN HDD carries on the self-checking

RAID0

Material transmission

Under the material transmission: The

HDD1 and the HDD2 LED glitter with

purple light. The material transmission

completes when LED sends the blue

light

RAID1

JBOD

BIG

HDD1 and HDD2 LED glitter in turn

with blue& red lights. Self- checking

completes when LED sends blue

light

Under the material transmission: The

HDD1 and the HDD2 LED glitter with

purple light. The material transmission

completes when LED sends the blue

light

Under the material transmission: The

HDD1 and the HDD2 LED glitter with

purple light. The material transmission

completes when LED sends the blue

light

HDD1 and HDD2 LED glitter in turn

with blue& red lights. Self- checking

completes when LED sends blue

light

Under the material transmission

condition: LED glitters with purple light

while operating different HDD. The

material transmission completes when

LED sends blue light

HDD1 and HDD2 LED glitter in turn

with blue& red lights. Self- checking

completes when LED sends blue

light

HDD1 and HDD2 LED glitter in turn

with blue& red lights. Self- checking

completes when LED sends blue

light

PATTERN HDD carries on the self-checking

RAID0

Material transmission

Under the material transmission condition: The

HDD1 LED glitters with purple light, and the

HDD2 LED glitters in turn with blue & red lights.

The material transmission completes when

HDD1 LED sends blue light and the HDD2 LED

continue glittering in turn with blue & red lights.

RAID1

JBOD

BIG

HDD1 and the HDD2 LED glitter in

turn with blue & red lights. Self-

checking completes when the

HDD1 LED sends blue light, and

the HDD2 LED continues glittering

in turn with blue& red lights.

Under the material transmission condition: The

HDD1 LED glitters with purple light, and the

HDD2 LED glitters in turn with blue & red lights.

The material transmission completes when

HDD1 LED sends blue light and the HDD2 LED

continue glittering in turn with blue & red lights.

HDD1 and the HDD2 LED glitter in

turn with blue & red lights. Self-

checking completes when the

HDD1 LED sends blue light, and

the HDD2 LED continues glittering

in turn with blue& red lights.

Under the material transmission condition: The

HDD1 LED glitters with purple light, and the

HDD2 LED glitters in turn with blue & red lights.

The material transmission completes when

HDD1 LED sends blue light and the HDD2 LED

continue glittering in turn with blue & red lights.

HDD1 and the HDD2 LED glitter in

turn with blue & red lights. Self-

checking completes when the

HDD1 LED sends blue light, and

the HDD2 LED continues glittering

in turn with blue& red lights.

Under the material transmission condition: The

HDD1 LED glitters with purple light, and the

HDD2 LED glitters in turn with blue & red lights.

The material transmission completes when

HDD1 LED sends blue light and the HDD2 LED

continue glittering in turn with blue & red lights.

HDD1 and the HDD2 LED glitter in

turn with blue & red lights. Self-

checking completes when the

HDD1 LED sends blue light, and

the HDD2 LED continues glittering

in turn with blue& red lights.

Attention:

2.1 USB Interface

2.1.1 JBOD MODE

JBOD RESET

My Computer manage

1. If you use two HDD simultaneously and discover that the LED1 or LED2

glittering with blue & red lights in turn for a long time. Please check and see if the

HDD has installed correctly.

2. If you simultaneously use two HDD, and the HDD damaged under RAID0,

JBOD, and BIG pattern, the data on the HDD will lose. Under the RAID1 pattern,

you may consider to take out the damaged HDD and replace formatted HDD

instead. The “ REBUILDING” function will start recovering and the data will be

recovered.

The two drives were connected to the products HDD1 and HDD2 Connector.

USB&Power Cable were connected;

Opening the power switch, pulling MODE switch to and press

switch, after a few seconds, the computer will automatically capture USB devices

and increased 2 drives(If not drive there, then the hard disk drive management

will re-zoning which format),At the moment you can Operate the disk. Re-zoning

which drives formatted as follows(All information will be eliminated when Format

hard drives).

Click “ ”, right-clicking pop-up menu, click Options “ ”, pop-

up computer management plan was pop-up as follow:

Click “ ” plan:

Right pop-up the additional disks ( :)' menus, choose “

”.

Click “ ”, followed by a clew to operate.

Disks Management

H Delete disk

segmentation

Segmentation additional disks

Click “ ” plan:

Right pop-up The additional disks (H :) and the additional disks (I :)' menus,

choose “ ”.

Click “ ”, followed by a clew to operate.

The two drives were connected to the products HDD1 and HDD2 Connector.

USB&Power Cable were connected;

Opening the power switch, pulling MODE switch to and press switch,

after a few seconds, the computer will automatically capture USB devices.

Click “ ”, right-clicking pop-up menu, click Options “ ”, pop-

up computer management plan was pop-up as follow:

Disks Management

Delete disk segmentation

Segmentation additional disks

2.1.2 BIG MODE

BIG RESET

My Computer manage

2.1.3 RAID0/FAST MODE

RAID0 RESET

My Computer manage

The two drives were connected to the products HDD1 and HDD2 Connector.

USB&Power Cable were connected;

Opening the power switch, pulling MODE switch to and press

switch, after a few seconds, the computer will automatically capture USB devices

and increased 1 drive(If not drive there, then the hard disk drive management will

re-zoning which format),At the moment you can Operate the disk. Re-zoning

which drives formatted as follows(All information will be eliminated when Format

hard drives).

Click “ ”, right-clicking pop-up menu, click Options “ ”, pop-

up computer management plan was pop-up as follow:

Click “ ” plan:

Right pop-up the additional disks ( :)' menus, choose “

”.

Click “ ”, followed by a clew to operate.

Disks Management

H Delete disk

segmentation

Segmentation additional disks

2.1.4 RAID1/SAFE

RAID1 RESET

My Computer manage

The two drives were connected to the products HDD1 and HDD2 Connector;

USB&Power Cable were connected;

Opening the power switch, pulling MODE switch to and press

switch, after a few seconds, the computer will automatically capture USB devices

and increased 2 drives(If not drive there, then the hard disk drive management

will re-zoning which format),At the moment you can Operate the disk. Re-zoning

which drives formatted as follows(All information will be eliminated when Format

hard drives);

Click “ ”, right-clicking pop-up menu, click Options “ ”, pop-

up computer management plan was pop-up as follow:

Click “ :

Right pop-up The additional disks ( :) and the additional disks (F :)' menus,

choose “ ”.

Click “ ”, followed by a clew to operate

Disks Management” plan

Delete Disk Segmentation

Segmentation additional disks

2.1.5 Partitioning Volumes

Partition a Volume

MS Windows

Important

Not Initialized

My Computer Manage

This section explains how to partition volumes after configuring them in the

SteelVine Manager GUI. You must partition volumes for the host computer's

operating system before you can store data on the volumes. Refer to the

operating system's documentation for further guidance.

: Before reconfiguring a volume, back up your data and delete

previously defined SteelVine Storage Reference Design partitions. If no hard disk

drives are connected to the SteelVine Storage Processor, the SteelVine

Processor device (the " " disk with no capacity allocated to it) will

appear. Do not initialize or modify that device.

1. Right-click the icon on your desktop and select from the

pop-up window.

2. Select under to open the Windows Disk Manager.Disk Management Storage

Every disk should appear with the word “ ”, a size value that shows the

available storage capacity, and a status of “ ”. Instead of Basic, a disk could

appear , , or .

If the disk appears as “ ”, right-click the disk icon and select

. A window opens with the selected disk (all Unknown disks may appear

in this window). Make sure the box next to each disk is checked and click OK. The

disk should now be marked as a disk.

If a disk appears as “ ”, right-click the disk icon, and select

. Within a few seconds, the disk should be marked as a .

If a disk is marked “ ”, right-click the disk icon and select Initialize

Disk. An additional dialog box appears allowing you to select which disks to

initialize. Uncheck the SteelVine Processor Disk item and click . Within a few

seconds, the selected disk(s) should be marked as a disk.

3. Right-click the configured disk's unallocated space and select .

If the New Partition option is not available, select the disk and initialize it first. To

do this, right-click on the disk item and select " ".

Basic

Online

Unknown Dynamic Not Initialized

Unknown Write

Signature

Basic

Dynamic Revert to

Basic Disk Basic disk

Not Initialized

Basic

New Partition

Initialize Disk

4. Click to start the Partition Wizard.Next

5. Select the Primary or Extended option and click .Next

6. Specify the partition size. By default, the partition occupies the entire volume.

Click .Next

7. Assign a drive letter or mount path and click .Next

8. Name and format the partition and click .

9. Review the file system settings and click to create the logical partition.

Important: Before reconfiguring a volume, back up your data and drag the old

drive to the trash to un-mount previously defined SteelVine Storage Reference

Design partition. If no hard drives are connected to the Storage Appliance, the

SteelVine Processor disk (8.0 GB Config Disk Media) will appear. Do not remove

or modify that partition. After you configure and partition the new volumes, restore

the backed-up data to the new configuration.

1. Launch from the > folder.

Finish

MacOSX

Disk Utility Application Utilities

2. Select a configured disk and click the Partition tab. This procedure illustrates

the Storage Policy configuration, which concatenates the capacity of all hard

drives connected to the SteelVine Storage Reference Design.

BIG

3. Select 1 from the drop-down list.

4. Enter a name for the volume in the field (such as “My BIG disk”.)

Partition Volume Scheme

Name

5. Select from the Format drop-down list.

6. Specify the size of the partition in the field.

7. Click the button.

8. Click to acknowledge the warning.

Mac OS Extended (journaled)

Size

Partition

Disk Utility mounts the created partition and represents it with an icon on the

desktop. The icon is labeled with the partition name.

the methods of operation with the USB interface.

1. If this product is in use for the first time or the mode (

) is changed, we must initialize and format the HDD before. (All

information will be eliminated when format hard drives)

2. When you need to change different mode (BIG, JBOD, RAID0/FAST,

RAID1/SAFE) you must press the RESET button, so that the enclosure can

distinguish the exact mode.

3. If you require a faster data transfer, MODE will be suggested to

use.

4. If you require a higher data security, MODE will be suggested to

use.

5. If you require a bigger hard disk capacity, will be suggested to use.

The FANTEC MR-35DUF provides the following Serial Advanced Technology

Attachment (SATA) features:

Automatic negotiation between SATA I (1.5Gbps) and SATA II (3.0 Gbps)

Serial ATA 2.5 specification compliance (Gen2m)

For detailed information about SATA technology, refer to the following

2.2 Firewire interface

3. NOTE :

BIG, JBOD, RAID0/FAST,

RAID1/SAFE

RAID0/FAST

RAID1/ SAFE

BIG MODE

4. Features

4.1 High speed external storage solution, USB2.0, Firewire 1394a/b.

SATA Features

specifications online:

Serial ATA: High Speed Serialized ATAttachment, Revision 1.0a

The Serial ATA web site is http://www.serialata.org/.

USB Features

4.2 Serial ATA HDD

4.3. Four Working Mode

BIG JBOD,RAID0/FAST,RAID1/SAFE

BIG

The FANTEC MR-35DUF provides the following Universal Serial Bus (USB)

features:

USB 1.0 and USB 2.0 specification compliance

For detailed information about USB technology, refer to the following

specifications online:

Universal Serial Bus Specification, Revision 1.1

Universal Serial Bus Specification, Revision 2.0

The USB Organization web site is http://www.usb.org/

Support Firewire 1394b (Firewire 800), backward compatible with 1394a

(Firewire 400).

Hardware acceleration for FastStart and small data block gives industry-leading

performance.

Populated with two Serial ATA (SATA) hard disk drives (HDDs), each unit can

manage as much as 2,000 gigabytes (i.e., 2 terabytes) of data, depending on the

capacity of the hard disk drives that are installed. By combining multiple units in a

daisy-chained hierarchy structure, you can increase the total storage capacity of

your system.

You can configure the FANTEC MR-35DUS2 to use any of the following Storage

Policies to map the appliance's physical hard drives to virtual drives that are

visible to the host computer. The virtual drives are called volumes in the GUI. The

host operating system treats each volume as if it were a single physical drive.

This virtualization allows you to overcome restrictions that are imposed by

physical hard drives, such as speed, storage capacity or data storage reliability.

The BIG storage policy concatenates a series of physical hard drives as a single

large volume; resulting in a seamless expansion of virtual volumes beyond the

physical limitations of singularly connected hard drives. SteelVine BIG storage

policy delivers maximum storage space without a single large capacity and costly

hard drive. Hard drive A and B are concatenated into a single virtual volume in the

Figure below with a storage capacity that is equal to the sum of each of the

physical hard drives A and B.

（，）

Firewire 1394a/b Features

It is also possible to create a BIG volume using only a single hard disk drive

connected to Port 0, and then increase the storage capacity of the volume later by

adding another hard disk drive to Port 1 and pressing the Mode Change push-

button. The new disk blocks of Port 1 will be concatenated to the end of the disk

blocks of Port 0, and any data that is stored on the existing BIG volume will be

preserved. However, it is not possible to expand an existing BIG volume by

adding another hard disk drive to Port 0 and still preserve any existing data on

that volume.

The JBOD (Just a Bunch of Disks) storage policy enables each hard drive to be

seen separately as one drive. They will get a single driver letter if used with one

partition.

JBOD

FAST(RAID0)

The FAST storage policy distributes access across all hard disks, also called

striping (equivalent to RAID 0). FAST presents the best data speed but no data

redundancy. FAST storage policy accelerates hard disk operating speed by using

many disks in parallel. Hard drive data segments are written to different disks

simultaneously which increases performance while sacrificing data redundancy.

To implement the FAST storage policy, the Processor creates a single virtual

volume that is striped across both hard drives, with a storage capacity that is

equal to the sum of both hard disk drives.

The SAFE storage policy stores all data in duplicate on separate drives to protect

against data loss due to drive failure. One drive mirrors the other at all times,

equivalent to RAID 1. Every write operation goes to both drives. SAFE provides

the highest level of data protection for critical data that you cannot afford to lose if

a hard drive fails, but halves the amount of storage capacity because all data

must be stored twice. The resulting storage capacity of the virtual SAFE volume

will be equivalent to the size of one hard drive (if both drives are the same) or the

smaller of the two drives (if they are different).

If one drive fails, the SAFE volume is still usable, but it is in a vulnerable state

because its mirrored hard drive is inaccessible. When the offline drive comes

back online, the appliance begins a rebuild process immediately to restore data

redundancy. A message box appears in the GUI to notify you that a rebuild is in

progress.

Although the volume remains available during the rebuild process, the volume is

susceptible to data loss through damage to the remaining drive until redundancy

is restored at the end of the rebuild and verification process. Host access takes

precedence over the rebuild process. If you continue to use the SAFE volume

during the rebuild, the rebuild process will take a longer time to complete, and the

host data transfer performance will also be affected.

SAFE(RAID1)

4.4 Support system Windows 2000/XP/VISTA & Mac os 9.0 or above version

4.4.1 System Expansion for Windows

Overview

This appendix describes the procedures needed with Microsoft Windows for

expanding file systems that have been created on volumes that have increased in

size, while preserving all of your existing data. After you have added more hard

disk drives to increase the storage capacity of a BIG volume, you must use the

supplemental procedure described below to allow the expanded capacity to be

recognized by the Windows file system.

A command-line utility named "Disk part. exe" ("Disk Partition") enables you to

manage hard disk partitions and volumes. This utility is included as part of

Windows XP Professional Edition, Windows 2003 Server and Windows Vista. For

Windows 2000 or Windows XP Home Edition, you must download the "disk part"

utility from Microsoft's website.

Additional third-party products (such as Norton Partition Magic) are available to

perform similar volume management activities, but those products are very

sophisticated and are not included in this manual.

Before you can use DiskPart.exe commands on a hard drive disk

partition/volume, you must first list and then select the partition/volume to extend

their capacity to match the virtual hard drives created in the SteelVine Manager

GUI.

1. Open a command prompt window by clicking Start --Run, then entering "cmd"

Procedure

2. At a command prompt, type “diskpart”.

5. Type “extend”

6. Type “exit” to quit Diskpart.exe

The volume size will be updated to reflect the expanded physical storage capacity

while maintaining all of the existing data that is stored on the volume.

3. Type” list volume” to display the existing volumes on the computer.

4. Type select volume <volume_number> where “<volume_number>” is number

of the volume that you want to extend. In this case that will be “2”.

Indice

Altri manuali Fantec Hardware di rete

Fantec

Fantec MR-35DRN Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente