Farmet FANTOM 1050 PRO Manuale utente

FANTOM

11005500 PPRROO |11225500 PPRROO

Edition: 2Effective from: 1.7.2019

FARMET a.s.

Jiřinková 276

552 03 Česká Skalice, CZ

phone: +420 491 450 111

fax: +420 491 450 136

GSM: +420 774 715 738

IČ: 46504931

DIĆ: CZ46504931

www.farmet.cz

e-mail: [email protected]

OPERATING MANUAL

FFAANNTTOOMM

11005500 PPRROO |11225500 PPRROO

2 | 59

Prepared by: Technical Department, Farmet a.s.

on 11.7.2019, changes reserved

PREFACE

3 | 59

PREFACE

Dear customer,

The agricultural machine you have purchased is a high-quality product of Farmet a.s. Česká Skalice.

You can fully utilise the advantages of your machine after thoroughly studying the operating manual.

The serial number of the machine is punched on the production label and written in the operating

manual (Your Machine Characteristics). This machine serial number must be stated whenever ordering spare

parts for possible repairs. The production label is located on the frame .

Use only spare parts for these machines according to the Spare parts catalogue officially issued by

the manufacturer, Farmet a.s. Česka Skalice.

Possibilities of Use of the Cultivator

The FANTOM PRO cultivator is designed for cultivation of all types of soils up to a processing depth of

15 cm.

Your Machine Characteristics :

MACHINE TYPE :

MACHINE SERIAL NUMBER :

SPECIAL DESIGN OR ACCESSORIES :

PREFACE

4 | 59

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR FUTURE REFERENCE

PREFACE

5 | 59

Contents

PREFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1 MACHINE LIMIT PARAMETERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1 Technical parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.2 Machine weight distribution during transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.3 Safety statement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2 GENERAL INSTRUCTIONS FOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3 MACHINE TRANSPORT USING TRANSPORT MEANS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4 MACHINE HANDLING USING LIFTING EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5 WORK SAFETY LABELS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

6 DESCRIPTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

6.1 Working parts of the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

6.2 Function of the closing (ball) valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

7 MACHINE ASSEMBLY AT THE CUSTOMER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

8 COMMISSIONING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

8.1 Agregation to a tractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

8.2 Hydraulics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

8.2.1 Hydraulic scheme FANTOM 1050 PRO, 1250 PRO. . . . . . . . . . . . . . . . . . . . . . . . . . . 25

8.2.2 Pressure vessel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

8.3 Folding and unfolding of the machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

8.3.1 Machine unfolding procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

8.3.2 Machine Folding Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

8.3.3 Securing the frames against unfolding during transport . . . . . . . . . . . . . . . . . . . . 33

8.3.4 Aggregation to the tractor using the three-point hitch –

Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

8.4 Brake distribution of the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

8.4.1 Hand brake control valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

8.4.2 Emergency brake release in case of air leak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

8.5 Description of the share/chisel replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

9 REAR ACCESSORIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

9.1 Quick-change roller system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

9.2 Setting the parallelogram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

9.3 Setting the levelling disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

9.4 Setting g levelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

9.4.1 Levelling pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

9.4.2 Setting the rear flexiboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

9.4.3 Setting the angle of rear levelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

10 MACHINE TRANSPORT ON ROADS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

11 MACHINE ADJUSTMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

11.1 Adjusting the working depth of the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

11.2 Adjusting the height of tines behind the transport axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

11.3 Adjusting the roller pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

11.4 Adjusting the efficiency of the flexiboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

12 MACHINE MAINTENANCE AND REPAIRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

13 MACHINE STORAGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

14 MACHINE LUBRICATION SCHEDULE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

PREFACE

6 | 59

15 ENVIROMENTAL PROTECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

16 MACHINE DISPOSAL AFTER SERVICE LIFE EXPIRY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

17 SERVICING AND WARRANTY CONDITIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

17.1 Servicing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

17.2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

7 | 59

MACHINE LIMIT PARAMETERS

1 MACHINE LIMIT PARAMETERS

• The machine is designed for soil ploughing up to a depth of 15 cm when agricultural soil cultivation.

Another type of use exceeding the determined purpose is forbidden.

• The machine is only operated by one person – the tractor operator.

• Machine operator must not use the machine in a different way, especially:

Transport of persons and animals on the machine structure,

Transport of burdens on the machine structure,

Aggregation of the machine with another towing equipment than stated in Chapter „8.1“.

1.1 Technical parameters

PARAMETERS FANTOM 1050 PRO FANTOM 1250 PRO

Working width 10,5 m 12,5 m

Transport width 3 m***

Transport height 3,7 m 3,998 m

Machine total length 9,64 m

Working depth 4 – 15 cm

Number of shares 57 67

Working performance 8,4 – 12,6 ha/h 10 – 15 ha/h

Towing means 295 – 400 kW* 400 – 440 kW*

Working speed 8 – 12 km/h

Maximum transport speed 20 km/h

Maximum slope grade (°) 6

Tyre dimensions - transport

Tyre pressure 504/70-20

480 kPa

Machine weight 11 160 kg** 14 480 kg**

* Recommended towing means, the real towing force may significantly vary according to the processing

depth, soil conditions, land slope, working body wear and adjustment.

** Weight of the machine with SD rollers and front flexi-board

*** Only applies to the version with standard tines length; the width of the machine is higher when the

extended version of tines is used!!!

MACHINE LIMIT PARAMETERS

1.2 Machine weight distribution during transport

FANTOM 1050 PRO

FANTOM 1250 PRO

1.3 Safety statement

This warning sign warns about an immediate dangerous situation ending with death or

severe injury.

This warning sign warns about a dangerous situation ending with death or severe injury.

This warning sign warns about a situation that may end with a smaller or slight injury. It

also warns about dangerous actions related to the activity that could lead to an injury.

8 | 59

9 | 59

GENERAL INSTRUCTIONS FOR USE

2 GENERAL INSTRUCTIONS FOR USE

• The machine is made in accordance with the latest equipment state and approved safety

regulations. However, dangers of user or third person injury or machine damage or

creation of other material damage may arise during use.

• Use the machine only in a technically sound condition, in accordance with its purpose,

aware of possible dangers, and while adhering to the safety instructions of this operating

manual! The manufacturer is not liable for damages caused by the use of the machine

that is in contradiction with the limit parameters of the machine and with the

instructions for the use of the machine . The user bears the risk.

Immediately remove especially the failures that may negatively affect safety!

• Machine operation may be performed by a person authorised by the operator under

these conditions :

• It must own a valid driver's licence of the corresponding category,

• It must be demonstrably familiarised with the safety regulations for work with the

machine and must practically master the machine operation,

• The machine may not be operated by juveniles,

• It must know the meaning of the safety signs located on the machine. Their

respecting is important for safe and reliable machine operation.

• Maintenance and servicing repairs on the machine may only be performed by a person :

• Authorised by the operator,

• Educated in the machinery field with knowledge of repairs of similar machines,

• Demonstrably familiarised with safety regulations for work with the machine,

• During a repair of a machine connected to a tractor, it must own a driver's licence of

the corresponding category.

• Machine operator must secure the safety of other persons when working with the

machine or transporting the machine.

• During machine work in the field or during transport, the operator must control the

machine from the tractor's cabin.

• The operator may enter the machine structure only with the machine at rest and blocked

against movement, namely only for these reasons :

• Adjustment of the machine working parts,

• Repair and maintenance of the machine,

• Adjustment of the working parts of the machine after unfolding the side frames.

• When stepping on the machine, do not step on roller tyres or other rotary parts. Those

may turn and you can cause very serious injuries by the subsequent fall.

• Any changes or modifications of machine may be performed only with written consent of

the manufacturer.

For possible damage arisen due to ignoring this instruction, the producer bears no

responsibility.

The machine must be maintained equipped with prescribed accessories and equipment

including safety marking.

All warning and safety signs must be legible and in their places. In case of damage or loss,

these signs must be immediately renewed.

• The operator must have the Operating Manual with the work safety requirements

available at any time when working with the machine.

GENERAL INSTRUCTIONS FOR USE

• The operator must not consume alcohol, medicines, narcotic and hallucinogenic

substances that decrease his attention and coordination capabilities while using the

machine.

If the operator must use medicines prescribed by a physician or uses freely sold

medicines, he must be informed by a physician, whether he is capable of responsible and

safe operation of the machine under these circumstances.

Protective equipment

For operation and maintenance use:

• tight clothes

• protective gloves and goggles against dust and

sharp parts of the machine.

10 | 59

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Farmet Timone

Farmet

Farmet FANTOM FX 470 NS Manuale utente

Farmet

Farmet FALCON 3 Manuale utente

Farmet

Farmet FANTOM FX 850 PS Manuale utente

Manuali Timone popolari di altre marche

MTD

MTD 410R Manuale utente

Craftsman

Craftsman 247.29931 Manuale utente

MTD

MTD FRT Series Manuale utente

Craftsman

Craftsman 917.298353 Manuale utente

Troy-Bilt

Troy-Bilt Colt FT Manuale utente

Ryobi

Ryobi 510r Manuale utente

MTD

MTD OHV Series Manuale utente

YAT

YAT YT5601-01 Manuale di manutenzione

Craftsman

Craftsman 917.296010 Manuale utente

Troy-Bilt

Troy-Bilt OEM-290-260 Manuale utente

Scheppach

Scheppach MTP560 Istruzioni per il montaggio

GARDEN WAY

GARDEN WAY 12194 Manuale utente

Classen

Classen STAND-AER SA-25 Istruzioni di installazione e manutenzione

Craftsman

Craftsman 850 Series Manuale utente

DR PILOT 2 Guida rapida

Altrad

Altrad ATIKA BH 1400 N Guida

WIL-RICH

WIL-RICH 2500 Manuale utente

Viking

Viking HB 685 Manuale utente