Farnear Electronics FN01-4GWB Manuale utente
Farnear Personal GPS Tracker
GPS Tracker
Model: FN01-4GWB
Version: V1.2
Date: Feb 20th
Farnear IOT Terminal
Copyright and Disclaimer
All copyrights belong to Farnear Technology Co., Limited. You are not allowed to revise,
copy or spread this file in any form without consent of Farnear.
is trademark of Farnear, protected by law.
Please read this user guide carefully before using or installation to avoid any possible
personal injury or property loss.
Revision History
Version
Author
Revision Date
Description of
change
V1.0
Kaisen
Jan 8th, 2019
First version
V1.1
Kaisen
June 22nd, 2019
Edit
V1.2
Kaisen
Feb 20th, 2020
Edit
Related Files
Version
File
Remarks
V1.2
<Farnear FNIOT GPRS Protocol and
Command List>
GPRS/SMS Data communication
V1.3
<Farnear FNIOT GPRS Protocol and
Command List>
GPRS/SMS Data communication
V1.4
<Farnear FNIOT GPRS Protocol and
Command List>
GPRS/SMS Data communication
Download link:
Related Software
Version
Software
Remarks
V1.0
< Parameter Tool >
Parameter configuration tool on
PC (Under developing)
Download link:
Content
1. Introduction ................................................................................1
2. Main function..............................................................................2
3. Hardware ....................................................................................2
4. Specification................................................................................3
5. Operation ....................................................................................3
6. Switch ON/OFF............................................................................5
7. Set by SMS ..................................................................................5
8. Command List .............................................................................9
9. Cautions ....................................................................................14
10. Support...................................................................................16
1
1. Introduction
FN01 is a personal remote location device with small size, IP67 case, build-in long standby
time battery and easy to use. This tracker can be used as an emergency cellular phone and
allows speed dialing authorized numbers for 2-way voice communication, of course, you can
define the dialing yourself. This tracker sends alert and call the preset numbers for
immediate assistance. The alerts include Date, Time, Coordinate, Speed and Map URL link. It
will send the coordinate to the designated server by GPRS and then displaying the location
by tracking platform.
Farnear Electronics Co., Ltd
FN01 User Guide
2
2. Main function
2.1 IP67 Real waterproof
2.2 3G/2G full band and 4G
2.3 Real Time Tracking on PC/Tablet/Mobile
2.4 One week battery life
2.5 Voice monitoring
2.6 Two way talking
2.7 SOS/GEO-Fence/Fall down alarm
2.8 Speed/Low battery Alarm
2.9 Small size 61*45*19mm
2.10 OTA
3. Hardware
GPS Tracker
1
RED LED
Power and GSM signal
2
Blue LED
GPS signal
3
SOS Button
SOS Alarm, Wake up the device
4
Microphone
5
Power Button
1. Switch on/off, 2. Make calling
6
Speaker
Charger Station
7
Type C port
Charger station port
8/9
RED LED
Get Power
Farnear Electronics Co., Ltd
FN01 User Guide
3
4. Specification
Item
Specification
Case
Real IP67 (1m deep water, stay 30m)
Dimension
61*45*19mm
Weight
Device is 50g, Full box is around 250g
GSM Chip
Qualcomm(4G)
GPS Chip
Qualcomm/Ublox, Accuracy: 5m-15m
Charging Voltage
DC 5V/1A
Internal Battery
900mAh/3.7V Lithium polymer battery
Power Consumption
Average 3~5mA standby current
Battery Life
30 seconds time interval 20h
5 minutes time interval 2days
10 minutes time interval 3days
60 minutes time interval 5days
Operating Temperature
-20℃~70℃
Humidity
5%~95%
LED Light
2 LED lights indicating GPS/GSM/Power status
Button/Switch
1 SOS button, 1 Power button (Define the button yourself)
SIM Card
Nano SIM Card
Sensor
3D Acceleration sensor
Frequency Band
2G
850MHz/900MHz/1800MHz/1900MHz
3G
Europe: B1/B8, North America: B2/B4/B5
4G
North America : B2/4/5/12/13
GPS Sensitivity
-161dBm
GPS Start Speed
Cold start 29s, Warm start 28s, Hot start 1s
Accuracy
5m-15m
Charge/Data
Dock station
Memory
Store 20.000 location data.
Option
WiFi, BLE
Protocol and Data
Protocol: MQTT, HTTP, TCP Data: txt, binary, json
5. Operation
5.1 Charging
When you get FN01, Please charge it first. Full charge will take 3 hours.
Farnear Electronics Co., Ltd
FN01 User Guide
4
5.2 Installing SIM Card
FN01 is suitable to Nano SIM Card only, and it support 2G/3G band.
Ensure the sim card is available and has enough fee.
Ensure PIN code is closed.
Caller ID service is necessary to FN01.
If you use gps tracking platform, please confirm that your sim card has GPRS function.
The tracker should be switched off before installing sim card.
Open the tracker as follow picture, and put into your sim card, then close the device
Remark: when you open the device, the O-ring on the screw may be taken out, so you need
put it back as above picture: Put the O-ring on the screw (The zoom in in picture), then fix
the screw on the case. (The O-ring is necessary for waterproof IP67)
Farnear Electronics Co., Ltd
FN01 User Guide
5
6. Switch ON/OFF
6.1 Press the side button till the tracker vibrate, two LED will bright during this time.
6.2 When you loose the button, Red led will blink fast.
6.3 Work mode:
Red LED
Condition
Blink once
Standby
Blink twice
GPRS
Blink fast
SOS
Blue LED
Blink once
GPS work but no signal
Blink twice
GPS work and there is signal
OFF
GPS is in sleep mode
6.4 Press the side button and don’t loose it until you feel the vibrate, it will off after a sound
of DiDi.
7. Set by SMS
7.1 Authorized Number
:123456AX,code,Phone number,mn#
X is 1/2/3/4/5/6/7/8 (1/2/3 is SOS number)
m: 0----listen in，1----Call in and hang off, 2---Call in and wait for user operation (Answer or
Hang off), 3---Call in ring, and answer automatically if user didn’t press the button after 3
rings
n: 0----Call in without GPS location, 1----Call in with GPS location
In some country you need add country code, otherwise, you can’t operate the device
It will reply you #IMEI,CMD-A1 OK#
Example:
:123456A1,+86,13823561161,20
#867688033841044,CMD-A1 OK#
:123456A1,D (Delete A1)
#867688033841044,CMD-A1 OK#
7.2 Get the Single Position
:123456F
Reply:
CMD-F,A,
http://maps.google.com/maps?f=q&hl=en
&q=22.7193300,114.387885&ie=UTF8&z=16&iwloc=addr&om=1Speed:000.1
Farnear Electronics Co., Ltd
FN01 User Guide
6
7.3 Checking Firmware Version
:123456B
Reply:
#867688033841044,CMD-B,V1.01,S:FN01-
NM-20190423C,01#
7.4 Set Fall Down and Fall Down Alarm
:123456K2,X
X=1 Open, X=2 Close
Example:
:123456K2,1
#867688033841044,CMD-K2,OK#
Alarm:ALM-F2,A,
http://maps.google.com/maps?f=q&hl=en&q=22.7198618,114.3877993&ie=UTF8&z=16&iw
loc=addr&om=1Speed:000.3
7.5 SOS Alarm
Press the big SOS button till you feel vibrate,
then loose it. The authorized number will
get message, and calling after message.
KEY,A,
http://maps.google.com/maps?f=q&hl=en&q=22.7197523,114.3878368&ie=UTF8&z=16&iw
loc=addr&om=1Speed:001.3
7.6 Set GEO-Fence
There are 2 kinds of Geo-fence. Circle Geo Fence and Rectangle Geo Fence.
The command of Circle Geo Fence is E
The command of Rectangle Geo Fence is I
The alarm mode of these two are the same: #ALM-Bx-y,maps.google.com#
x=1 is Circle Geo-fence go in alarm
x=2 is Circle Geo-fence go out alarm
x=3 is Rectangle Geo-fence go in alarm
x=4 is Rectangle Geo-fence go out alarm
y is the number of Geo-fence. (You can set 5 fence for each fence)
Circle Fence: :123456Ex,y,zaa.aaaaaaaN/S,bbb.bbbbbbE/W,k
x is fence number;
y is switch, y=1 on, y=0 off
z is alarm mode, 1 go in alarm, 2 go out alarm, 3 go out and in alarm
aa.aaaaaaaN(S), bb.bbbbbbbE(W) is the coordinate of the circle center
k is the radius and its unit is meter, maximum value is more than 4billion
Farnear Electronics Co., Ltd
FN01 User Guide
7
Example:
Send: :123456E1,1,1,22.7198011N,114.3878008E,50
Reply: #867688033841044,CMD-E,OK#
Rectangle Fence:
:123456Ix,y,z,aa.aaaaaaaN/S,bbb.bbbbbbbE/
W,cc.cccccccN/S,ddd.dddddddE/W
x is fence number;
y is switch, y=1 on, y=0 off
z is alarm mode, 1 go in alarm, 2 go out alarm, 3 go out and in alarm
aa.aaaaaaaN/S,bbb.bbbbbbbE/W,cc.cccccccN/S,ddd.dddddddE/W is the two coordinate of
the rectangle (the two coordinates of opposite angles)
Example:
Send: :123456I1,1,1,22.7198011N,114.38780
08E,22.7198012N,114.3878009E
Reply: #867688033841044,CMD-I,OK#
Alarm:
ALM-B3-2,A,
http://maps.google.com/maps?f=q&hl=en&
q=22.7197820,114.3877998&ie=UTF8&z=16
&iwloc=addr&om=1Speed:000.9
This is a Rectangle Fence Alarm
7.7 Connect to Server
Set APN
:123456OAPN,Name,PSW (You need confirm
with your sim card supplier about the PSW)
#IMEI,CMD-O,APN#
Set IP&Port
:123456CTIP;Port
#IMEI,CMD-C#
Example:
Send: :123456O3gnet,,
Reply: #867688033841044,CMD-O,3gnet#
Send: :123456CT123.249.83.8;10385
Reply: #867688033841044,CMD-C#
Connect Server
:123456Dx x=1 connect, x=0 disconnect
Indice
