Fast BW750 Manuale utente
BW500 and BW750 Trailer Sprayer
OPERATION MANUAL
Fast Manufacturing, Inc.
54859 County Road 44
Mountain Lake, MN 56159
2
General Information
All rights, especially copying and distribution rights are reserved. No part of this publication may be reproduced in any
form or by any means, electronic or mechanical, including photocopying, without express written permission from Fast
Manufacturing, Inc.
Parts information in this manual represents components installed when product was manufactured based upon the best
available information. Modications made subsequent to initial delivery are not included. Always verify the parts and color
required with Fast Manufacturing, Inc at 1-800-772-9279.
If you have any questions, please contact your dealer or our Parts and Service Department.
3
Limited Warranty
Fast Manufacturng Inc. warrants to the buyer that the new machinery is free from defects in material and workmanship.
This warranty is only effective as to any new machinery which has not been altered, changed, repaired or treated since its
delivery to the buyer, other than by Fast Manufacturng Inc. or its authorized dealers or employees, and does not apply to
accessories, attachments, tools or parts, sold or operated with the new machinery, if they have not been manufactured by
Fast Manufacturng Inc.
Fast Manufacturng Inc. shall only be liable for defects in the materials or workmanship attributable to faulty material or bad
workmanship that can be proved by the buyer, and specically excludes liability for repairs arising as a result of normal
wear and tear of the new machinery or in any other manner whatsoever, and without limiting the generality of the foregoing,
excludes application or installation of parts not completed in accordance with Fast Manufacturng Inc. operator’s manual,
specications, or printed instructions.
Written notice shall be given by registered mail, to Fast Manufacturng Inc. within seven (7) days after the defect shall have
become apparent or the repairs shall have become necessary, addressed as follows:
FAST MANUFACTURING INC.
54859 County Road 44,
Mountain Lake, MN 56159.
This warranty shall expire one (1) year after the date of delivery of the new machinery.
If these conditions are fullled, FAST shall at its own cost and at its own option either repair or replace any defective parts
provided that the buyer shall be responsible for all expenses incurred as a result of repairs, labor, parts, transportation or
any other work, unless FAST has authorized such expenses in advance.
The warranty shall not extend to any repairs, changes, alterations, or replacements made to the new equipment other than
by FAST or its authorized dealers or employees.
This warranty extends only to the original owner of the new equipment.
Rubber parts (including tires, hoses, grommets) are not warranted.
This warranty is limited to the terms stated herein and is in lieu of any other warranties whether express or implied, and
without limiting the generality of the foregoing, excluded all warranties, express or implied or conditions whether statutory
or otherwise as to quality and tness for any purpose of the new equipment. FAST disclaims all liability for incidental or
consequential damages.
This Sprayer is subject to design changes and FAST MANUFACTURING INC. shall not be required to retrot or exchange
items on previously sold units except at its own option.
Fast Manufacturng Inc.
Warranty void if not registered.
4
FAST MANUFACTURING
WARRANTY REGISTRATION
Warranty Registration Form & Inspection Report
Warranty Registration
This form must be lled out by the dealer and signed by both the dealer and the customer at the time of delivery.
Customer’s Name ________________________________________________________________________________
Address ________________________________________________________________________________________
City, State, Code _________________________________________________________________________________
Phone Number __________________________________________________________________________________
Dealer Name ____________________________________________________________________________________
Address ________________________________________________________________________________________
City, State, Code _________________________________________________________________________________
Model__________________________________________________________________________________________
Serial Number ___________________________________________________________________________________
Delivery Date____________________________________________________________________________________
DEALER INSPECTION REPORT SAFETY
____All Fasteners Tight ____ Safety Chain Installed
____Wheel Bolts Torqued ____ All Guards Installed
____Hydraulic Hoses and Fittings Free and Tight ____ All Safety Signs Installed
____Fertilizer Hoses and Fittings Free and Tight ____ Reectors, SMV and Lights Clean
____Wheel Drive Turns Freely ____ Review Operating and
____Lubricate Machine Safety Instructions
____Check Tire Pressure
____Frame and Wings Level
____Monitors and Controllers Function
____Wiring Harness Connected
I have thoroughly instructed the buyer on the above described equipment which review included the Operator’s Manual
content, equipment care, adjustments, safe operation and applicable warranty policy.
Date_____________________ Dealer’s Rep. Signature___________________________________________________
The above equipment and Operator’s Manual have been received by me and I have been thoroughly instructed as to care,
adjustments, safe operation and applicable warranty policy.
Date_____________________ Owner’s Signature________________________________________________________
White - Fast Manufacturing
Yellow - Dealer
Pink - Customer
5
Contents
General Information...................................................................................................................... 2
Fast Manufacturing Warranty Registration Form ...................................................................... 4
Serial Number Location.............................................................................................................. 10
1 Introduction................................................................................................................................... 10
2 Safety............................................................................................................................................. 11
2.1 Safety Alert Symbol And Signal Words ............................................................................. 11
2.2 General Safety...................................................................................................................... 12
2.3 Operating Safety ................................................................................................................. 12
2.4 Maintenance Safety.............................................................................................................. 13
2.4.1 Power Source Shutdown Procedure...........................................................................13
2.5 Implement Safety ................................................................................................................. 13
2.6 Chemical Safety .................................................................................................................. 14
2.7 Hydraulic Safety................................................................................................................... 14
2.8 Transport Safety.................................................................................................................. 14
2.9 Storage Safety...................................................................................................................... 15
2.10 Tire Safety........................................................................................................................... 15
2.11 Safety Signs........................................................................................................................ 15
2.12 Sign-Off Form..................................................................................................................... 16
2.13 Safety Sign Locations........................................................................................................ 17
2.14 Reective Decal Locations................................................................................................ 22
3 Delivery.......................................................................................................................................... 23
3.1 Pre-Delivery Check List ...................................................................................................... 23
3.2 Delivery Check List ............................................................................................................. 23
4 Sprayer Setup And Assembly ..................................................................................................... 24
4.1 Wheel Spacing...................................................................................................................... 24
4.2 Implement Driveline (PTO Drive Pumps Only) .................................................................. 24
5 Hitching Sprayer To Tractor ........................................................................................................ 25
5.1 Hitching.................................................................................................................................. 25
5.2 Hydraulic Drive Sprayer Pump Hose Hook Up (Optional)................................................ 27
5.3 Control Box Installation....................................................................................................... 27
5.3.1 Electrical Connections To Tractor................................................................................27
6
5.4 Electric Sprayer Controls.................................................................................................... 27
5.5 Hydraulic Hose Connections - Boom Control................................................................... 28
5.5.1 EF & EFT Boom Hydraulic Hose Connections............................................................28
5.5.2 EFT Boom Electrical Connections...............................................................................28
5.5.3 HC Boom Hydraulic Hose And Electrical Connections..............................................28
5.5.4 HC Boom Electrical Connections.................................................................................29
5.6 Sprayer Accessories............................................................................................................ 29
6 Unhitching Sprayer From Tractor ............................................................................................... 30
6.1 Unhitching ............................................................................................................................ 30
7 Transporting Sprayer ................................................................................................................... 31
7.1 Transport Lighting .............................................................................................................. 31
7.2 SMV Emblem and Reectors ............................................................................................. 31
7.3 Safety Chain ........................................................................................................................ 31
8 Sprayer Accessories .................................................................................................................... 32
8.1 Foam Marker Switch Box ..................................................................................................... 32
8.2 Fence Line Kit (Right Side, Left Side Or Both)................................................................... 32
8.3 In-Cab Electric 50 Gallon Rinse System ............................................................................. 32
9 Operation....................................................................................................................................... 33
9.1 New Operator Or Owner ...................................................................................................... 33
9.2 Break-In................................................................................................................................. 33
9.3 Pre-Operation Checklist ...................................................................................................... 34
9.4 Measuring Travel Speed ...................................................................................................... 34
9.4.1 Spraying Solutions Other Than Water.........................................................................34
9.5 Tip Selection......................................................................................................................... 35
9.6 Spray Tip Wear ..................................................................................................................... 36
9.7 Air Induction Spray Tips (Greenleaf Turbo Drop Nozzles) ............................................... 37
9.7.1 15 Inch Nozzle Spacing.................................................................................................37
9.7.2 20 Inch Nozzle Spacing.................................................................................................40
9.8 Teejet Air Induction Spray Tips........................................................................................... 43
9.8.1 20 Inch Spacing..............................................................................................................43
9.9 Teejet Application Rates In Gallons Per Acre.................................................................... 44
9.9.1 15 Inch Tip Spacing.......................................................................................................44
9.9.2 20 Inch Tip Spacing........................................................................................................46
7
9.10 Teejet Floodjet Wide Angle Flat Spray Tips..................................................................... 49
9.10.1 40 Inch Spacing............................................................................................................49
9.11 Equipment Matching .......................................................................................................... 50
9.12 Sprayer Controls................................................................................................................. 50
9.13 Standard Primary Filter ..................................................................................................... 52
9.14 In Line Filter Kit.................................................................................................................. 52
9.15 Self Cleaning Filter (Optional)........................................................................................... 52
9.16 Filling The Product Tank ................................................................................................... 53
9.16.1 Fill Through Top Lid (Standard Conguration)........................................................53
9.16.2 Filling With Transfer Pump.........................................................................................53
9.16.3 Filling With Sprayer Pump..........................................................................................53
9.17 Priming The Sprayer.......................................................................................................... 54
9.17.1 Priming The Sprayer Equipped With A Raven Rate Controller................................55
9.18 Calibrating The Sprayer..................................................................................................... 55
9.18.1 Teejet Electric Control System ..................................................................................55
9.18.2 Raven Rate Control System (Optional)......................................................................55
9.19 Tank Tie Down Straps........................................................................................................ 56
9.20 Chemical Inductor (Optional)............................................................................................ 58
9.21 Hand Rinse Gun For Chemical Inductor (Optional)........................................................ 59
9.21.1 Standard System..........................................................................................................59
9.21.2 Optional Electric System.............................................................................................60
9.22 Personal Fresh Water Tank ............................................................................................... 60
9.23 External Sight Gauge......................................................................................................... 61
9.24 Rinse Tank Flush System (Optional)................................................................................ 61
9.25 Manual Control System ..................................................................................................... 61
9.25.1 Filling The Rinse Tank.................................................................................................61
9.25.2 Fill Through Top Lid....................................................................................................61
9.25.3 Filling With Transfer Pump.........................................................................................61
9.25.4 Filling With Sprayer Pump..........................................................................................62
9.26 Electric Control System..................................................................................................... 63
9.26.1 Filling The Rinse Tank.................................................................................................63
9.26.2 Fill Through Top Lid.....................................................................................................63
8
9.26.3 Filling With Transfer Pump..........................................................................................63
9.26.4 Filling With Sprayer Pump...........................................................................................63
9.27 Cleaning The Sprayer ........................................................................................................ 64
9.28 Manual Control Rinse System .......................................................................................... 64
9.28.1 Short Term Shutdown..................................................................................................64
9.28.2 Long Term Shutdown..................................................................................................64
9.29 Electric Control Rinse System.......................................................................................... 65
9.29.1 Short Term Shutdown.................................................................................................65
9.29.2 Long Term Shutdown..................................................................................................65
9.29.3 Cleaning Your Sprayer Manually................................................................................66
9.30 Hydraulic Boom Operation................................................................................................ 66
9.30.1 EF & EFT Boom............................................................................................................66
9.30.2 EFT Boom.....................................................................................................................67
9.30.3 HC Boom.......................................................................................................................67
10 Service And Maintenance.. ........................................................................................................ 68
10.1 Service ................................................................................................................................ 68
10.1.1 Fluids And Lubricants................................................................................................68
10.1.2 Daily Lubrication Interval...........................................................................................68
10.1.3 Weekly Lubrication Interval.......................................................................................68
10.1.4 200 Hour Lubrication Interval.....................................................................................71
10.2 Maintenance ....................................................................................................................... 71
10.2.1 General.........................................................................................................................71
10.2.2 Fasteners.....................................................................................................................71
10.2.3 Tire Pressure...............................................................................................................71
10.2.4 Filters...........................................................................................................................71
10.2.5 Sprayer Tips.................................................................................................................71
10.3 Storing And Winterizing .................................................................................................... 71
10.3.1 Chemical Inductor.......................................................................................................72
10.3.2 Foam Marker................................................................................................................72
10.3.3 Cleaning The Outside Of The Sprayer.......................................................................72
10.4 Boom Adjustments ............................................................................................................ 72
10.4.1 HC Boom Only.............................................................................................................72
10.4.2 EF & EFT Boom Only..................................................................................................73
9
10.5 Service Record....................................................................................................................75
11 Troubleshooting.......................................................................................................................... 76
12 Specications ............................................................................................................................. 79
12.1 Mechanical.......................................................................................................................... 79
12.2 Hydraulic Fitting Torque.................................................................................................... 79
12.3 Raven Console Calibration Information............................................................................ 81
13 Optional Accessories................................................................................................................. 82
13.1 In Line Filter Kit.................................................................................................................. 82
10
Serial Number Location
Always give your dealer the serial number of your Fast
Manufacturing, Inc. Sprayer when ordering parts or
requesting service or other information.
The serial number is stamped into the frame where indicated.
Please write number in space provided for easy reference.
Date Purchased_________________________________
Model Number__________________________________
Sprayer Serial Number ___________________________
1. Introduction
Congratulations on your choice of a Fast Manufacturing,
Inc. Sprayer to complement your operation. This equipment
has been designed and manufactured to meet the needs of
a discriminating buyer for the efcient application of spray
mix.
Safe, efcient and trouble free operation of your Fast
Manufacturing, Inc. Sprayer requires that you and anyone
else who will be operating or maintaining the sprayer, read
and understand the Safety, Operation, Maintenance and
Trouble Shooting information contained in the Operator’s
Manual.
This manual covers the BW 500/750 Series Sprayers built
by Fast Manufacturing, Inc. Use the Table of Contents as a
guide when searching for specic information.
Keep this manual handy for frequent reference and to
pass on to new operators or owners. Call your Fast
Manufacturing, Inc. dealer or distributor if you need
assistance or information.
OPERATOR ORIENTATION - The directions left, right, front
and rear, as mentioned throughout this manual, are as seen
from the tractor driver’s seat and facing in the direction of
travel.
If you have any questions not answered in this manual or
require additional copies or the manual is damaged, please
contact your dealer or
Fast Manufacturing, Inc.
54859 Country Road 44,
Mountain Lake, MN 56159
(Telephone) 507-427-3861
(FAX) 507-427-3030.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Fast Spruzzatore di vernice
