fatboy ROCKCOCO Manuale utente
ROCKCOCO
MANUAL
RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 1 15/12/14 10:34
HANG IN THERE
ROCKCOCO
RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 2 15/12/14 10:34
rockcoco assembly manual
ASSEMBLY OF THE ROCKCOCO
GLAMOUR MEETS
ROCK ’N ROLL
Looking for a touch of Louis XV glamour mixed with some
dirty rock`n’roll, Dutch designers DeMakersVan created this
urban but durable chandelier with iconic Fatboy wiring.
FIRST OF ALL...
Check the contents of the box. Note! In case of missing or
damaged parts, please contact the sales crew.
1. 1 construction ring
2. 1 cap insert screw + 4 screws (ø 6mm) + 4 dowels (ø 6mm)
3. 5 long arms
4. 5 short arms
5. 1 mounting plate + wire and cable clamp (screw included)
6. cable house with led lights
7. 10 shades
8. 1 transformer case
9. 1 transformer
10. 1 short connection cable (indoor use)
11. 1 long connection cable (outdoor use)
12. 1 cap + insert
13. 1 remote
1
2
3
4
7
5
6
8
9
1 0
1 1
12
1 3
RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 3 15/12/14 10:34
rockcoco assembly manual
STEP 1
Position construction ring with the upper side on the top
ring (it says TOP).
STEP 3
Click mounting plate in corresponding clicker in large
arm.
STEP 2
Take arm no.1 of the 5 large arms and slide it into one of the
corresponding outer holes in the construction ring until it is
all the way through.
Make sure pin lays flush with top surface of
construction ring.
RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 4 15/12/14 10:35
rockcoco assembly manual
STEP 4
Slide large arm no. 2 in corresponding hole of construction
ring until it is pushed all the way through.
STEP 6
Repeat step 4 and 5 for the other 3 large arms and put the
RockCoco on a flat surface.
Enjoy your halfway result for a moment!
STEP 5
Click large arm no. 2 on the mounting plate.
To click large arm no. 2 on the mounting plate it might be
necessary to bend the arm a bit.
RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 5 15/12/14 10:35
rockcoco assembly manual
STEP 7
Take arm no. 1 of the 5 small arms and slide it into one of
the corresponding inner holes of the construction ring until
it is slid all the way through.
STEP 9
Position the cable house with Led strings in the middle of
the chandelier. Be aware of the difference in size of the Led
cables for the short arms and long arms!
STEP 8
Repeat step 7 for the other 4 small arms and wipe the sweat
from your forehead if necessary... Looks good right?
Make sure the small arm makes contact
with the construction ring.
RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 6 15/12/14 10:35
rockcoco assembly manual
STEP 10
Position the shorter Led-cables in the small arms and start
clicking the cable from the Led module.
STEP 12 (FINAL STEP)
After removing the protective foams from the lights,
position shade plates on arms (repeat step for all
shade plates).
STEP 11
Position the longer Led-cables in the large arms and start
clicking the cable from the Led module.
Click the cable behind clickers. Click the cable behind clickers.
Place shade plate over Led-module on the arm.
The loud click you hear is a normal sound.
Rotate the shade plate to lock it on the arm, rotate until
friction locks the base plate.
*click *
RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 7 15/12/14 10:35
rockcoco assembly manual
YOU ARE DONE
!
NOW START ASSEMBLY FOR INDOOR OR OUTDOOR USE
INTRODUCTION
Caution! Follow the step-by-step instructions as described
for your own safety and to avoid problems with connecting
the Fatboy Ceiling kit and Fatboy Rockcoco to your home grid.
Used tools
Voltage-tester screwdriver
Crosshead screwdriver
Stripping pliers
Electrician’s pliers
Drilling machine (electric/portable)
Ø 6 mm drill bit
Ø 6 mm drill bit
Materials (included)
Dowels 4x (included)
Screws 4x (included)
Please note: not all tools are required for outdoor suspension.
RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 8 15/12/14 10:35
rockcoco assembly manual
INDOOR
ASSEMBLY
RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 9 15/12/14 10:35
rockcoco assembly manual
STEP 1
Be sure your home grid provides the required voltage,
frequency and grounding: 230 - 240 VAC / 50 - 60 Hz /
Earthed sign.
Caution! Do not install the RockCoco Ceiling kit in case of any
doubts. Please contact the sales outlet or an electrician.
STEP 2
Warning! To avoid any chance of an electric shock, switch
off the current in the meter cupboard.
RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 10 15/12/14 10:35
Indice
Altri manuali fatboy Attrezzatura di illuminazione
