IMPORTANT SAFTY NOTES
1. Be sure to read this manual thoroughly before installing projector ceiling mount.
2. Only qualified technicians (two or more) should install or dismount the projector from the ceiling mount.
3. For safety reasons, check the strength of the ceiling before installation. If ceiling is not strong enough to hold ceiling mount
and projector weight, do not install until ceiling is properly reinforced for installation.
4. Ceiling mount should only be installed on a flat ceiling surface. Do not install on wall.
5. Do not install the ceiling mount to a ceiling subjected to vibration or impact.
6. To avoid fire, do not install projector with the ceiling mount in a humid or excessively dusty environment.
7. Only use the supplied accessories to assemble and install the ceiling mount. Use of accessories other than those supplied
may result in damage to the projector ceiling mount.
8. Unplug the projector power cable and all other connecting cables before dismounting the projector from the ceiling mount.
9. Do not hit or hang heavy objects on the ceiling mount other then one projector unit. If the ceiling mount is damaged, stop
use and contact a qualified technicians immediately to dismount the projector and ceiling projector.
10. Do not alter the ceiling mount. Altering ceiling mount may result in damage to the mount, cause safety hazards, and will
void any warranty.
Ceiling Mount Weight Capacity: < 55 lb.
Use with products heavier than the weight capacity may result in instability that may lead to possible injury.
Manufacturer is not liable for any damages and injury caused by mishandling or improper installation of mount.
ACCESSORIES
Setting Plate (1) Ceiling Plate Cover (1) Extended Arms (1)
NO Image Description Quantity
A Screw (M6 x 55) 5
B
Φ
10mm Anchor bolt 5
C Allen key 1
D Screw (M4 x 10) 4
E Screw (M5 x 12) 4
F M5 nuts 4
1
