FDI EyG YG-S7G2-SOM Manuale utente
Copyright ©2015, Future Designs, Inc., All Rights Reserved
User’s Manual
SYG-S7G2-SOM
ΣYG-S7G2-SOM User’s Manual
11/18/2015
Copyright ©2015,
Future Designs, Inc Page 2of 17
Important Legal Information
Information in this document is provided solely to enable the use of Future Designs, Inc. (FDI) products.
FDI assumes no liability whatsoever, including infringement of any patent or copyright. FDI reserves the
right to make changes to these specifications at any time, without notice. No part of this document may be
reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without
the express written permission of Future Designs, Inc. 996 A Cleaner Way, Huntsville, AL 35805.
NOTE: The inclusion of vendor software products in this kit does not imply an endorsement of the
product by Future Designs, Inc.
yG™is a trademark of Future Designs, Inc.
Renesas Synergy™ is a trademark of Renesas Electronics Corporation.
Microsoft, MS-DOS, Windows, Windows XP, Microsoft Word are registered trademarks of Microsoft
Corporation.
Other brand names are trademarks or registered trademarks of their respective owners.
Printed in the United States of America.
For more information on FDI or our products please visit www.TeamFDI.com.
2015 Future Designs, Inc. All rights reserved.
ΣYG-S7G2-SOM User’s Manual
11/18/2015
Copyright ©2015,
Future Designs, Inc Page 3of 17
Table of Contents
Important Legal Information.........................................................................................................................................2
ΣyG-S7G2 System on Module (SOM) Overview.............................................................................................4
1.1Introduction...................................................................................................................................................4
1.2ESD Warning................................................................................................................................................4
1.3Renesas Synergy S7G2 Microcontoller Block Diagram...............................................................................5
1.4ΣyG-S7G2 SOM System Block Diagram.....................................................................................................6
1.5Requirements.................................................................................................................................................7
1.6ΣyG-S7G2 SOM Power Requirements.........................................................................................................7
ΣyG-S7G2 SOM System on Module Board Components................................................................................7
2.1ARM Mini-JTAG J2.....................................................................................................................................7
2.2Tag Connect J7..............................................................................................................................................8
2.3MicroSD Socket J1........................................................................................................................................9
2.3.1Inserting the microSD card into the microSD socket..........................................................................10
2.3.2Removing the microSD card from the microSD socket......................................................................11
2.4Ethernet PHY U5........................................................................................................................................11
2.5200-pin SOMDIMM Connector Details J4.................................................................................................12
ΣyG-S7G2 System on Module Board Layout.................................................................................................16
3.1 Schematics.........................................................................................................................................................16
3.2 Mechanicals.......................................................................................................................................................16
Support............................................................................................................................................................17
4.1Where to Get Help.......................................................................................................................................17
4.2Useful Links................................................................................................................................................17
ΣYG-S7G2-SOM User’s Manual
11/18/2015
Copyright ©2015,
Future Designs, Inc Page 4of 17
ΣyG-S7G2 System on Module (SOM) Overview
1.1 Introduction
The ΣyG-S7G2 System on Module (SOM) provides a quick and easy solution for
implementing Renesas Synergy
TM
into a design, by providing the basic functions necessary for
a product on an easy to use SODIMM. The ΣyG-S7G2 SOM uses an industry standard 200-
pin SODIMM interface and is compatible with FDI’s ΣyG
TM
Modular Development LCD
Kits. It can also be used for custom platform development or customer applications.
1.2 ESD Warning
The ΣyG-S7G2 SOM is shipped in a protective anti-static package. Do not subject the
module to high electrostatic potentials. Exposure to high electrostatic potentials may cause
damage to the boards that will not be covered under warranty. General practice for working
with static sensitive devices should be followed when working with the kit.
ΣYG-S7G2-SOM User’s Manual
11/18/2015
Copyright ©2015,
Future Designs, Inc Page 5of 17
1.3 Renesas Synergy S7G2 Microcontoller Block Diagram
Figure 1: S7G2 System Block Diagram
ΣYG-S7G2-SOM User’s Manual
11/18/2015
Copyright ©2015,
Future Designs, Inc Page 6of 17
1.4 ΣyG-S7G2 SOM System Block Diagram
Figure 2: ΣYG-S7G2 Kit Block Diagram (4.3” display shown)
ΣYG-S7G2-SOM User’s Manual
11/18/2015
Copyright ©2015,
Future Designs, Inc Page 7of 17
1.5 Requirements
The ΣyG-S7G2 SOM requires a development kit such as the ΣyG-S7G2 Modular
Development Kit. Each yG development kit includes:
•ΣyG-S7G2 System on Module (SOM)
•Renesas Synergy Software Platform
•Carrier Board
•5 VDC, 2.3A North American Power Supply
•USB and Ethernet Cables
•Segger ARM Cortex-M Mini-JTAG debugger and cables
•Optional LCD Carrier Board
•Optional 4.3” or 7.0″PCAP Touch Screen LCD
1.6 ΣyG-S7G2 SOM Power Requirements
Power is supplied to the yG-S7G2 SOM through the development kit. The power
requirement for all yG development kits is 5V DC Center Positive 2A Power Supply. The power
load of the SOM is 300mA typical and 475mA max load.
ΣyG-S7G2 SOM System on Module Board Components
2.1 ARM Mini-JTAG J2
The ΣyG-S7G2 SOM uses a JTAG connector based on a 2mm header. This smaller connector
provides 100% of the functionality of the standard 20-pin JTAG connector, but utilizes 70% less
board space.
Pin Number Description Pin Number Description
1 VCC 6 TDO
2 TMS 7 X
3 GND 8 TDI
4 TCK 9 GND
5 GND 10 JST#
ΣYG-S7G2-SOM User’s Manual
11/18/2015
Copyright ©2015,
Future Designs, Inc Page 8of 17
Figure 3: ARM Mini JTAG
2.2 Tag Connect J7
Use the Tag Connect 10-pin cable to program and JTAG the ΣyG-S7G2 SOM using a
Segger J-Link device.
Cable: http://www.tag-connect.com/tc2050-arm2010
Cable: http://www.tag-connect.com/TC2050-IDC-NL
Figure 4: Tag-Connect JTAG
ΣYG-S7G2-SOM User’s Manual
11/18/2015
Copyright ©2015,
Future Designs, Inc Page 9of 17
2.3 MicroSD Socket J1
The ΣyG-S7G2 SOM utilizes a microSD for flexible mass storage. MicroSD flash cards are
common, cost effective, and provides a large amount of user-changeable memory.
Pin Number Description
1 DAT2/RSV
2 CD_DAT3/CS#
3 CMD/SDI
4 VDD
5 CLK/SCLK
6 VSS
7 DAT0/SDO
8 DAT1/RSV
9 CD
The microSD card must be removed using the spring loaded “push-pull” mechanism on the
microSD socket. Forceful removal of a microSD card will result in permanent damage to the
socket that is not covered under warranty. To insert the card, push it into the socket until a
“click” sound is heard. Similarly, to remove the card, push the card into the socket. The push-
pull mechanism will “click” again and eject the card from the socket. The card is now
available for safe removal.
ΣYG-S7G2-SOM User’s Manual
11/18/2015
Copyright ©2015,
Future Designs, Inc Page 10 of 17
2.3.1 : Inserting the microSD card into the microSD socket
First, prepare to insert the microSD card into the
socket by positioning it with its text facing up.
Position the ridge, or “lip”, of the card furthest
from the socket.
Next, partially insert the card into the socket.
Then, use your figure to gently push the card
into the socket. When the card “clicks” into
place it is in its final, locked position. The card
is now ready for use.
Note: Once the microSD card is fully inserted it
should not fall out, even if the unit is shaken
vigorously.
Indice
Altri manuali FDI Hardware per computer
FDI
FDI ELI121-CRW Manuale utente
FDI
FDI UEZGUI-1788-56VI Manuale di istruzioni
FDI
FDI UEZGUI-4357-70WVN Manuale utente
FDI
FDI USB-ICP-SAB9 Manuale utente
FDI
FDI uEZGUI-EXP1 Manuale utente
FDI
FDI ELI70-CR Manuale utente
FDI
FDI uEZGUI-EXP-DK Manuale utente
FDI
FDI EyG SYG-S7G2-SOM Manuale utente
FDI
FDI SYG-S7G2-70C-MDK Manuale utente
FDI
FDI uEZGUI-EXP1 Manuale utente
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
