Feig Electronic ISC.ANT.UMUX Manuale utente
INSTALLATION
final – public (B)
2013-02-07 – M71100-3e-ID-B.docx
ID ISC.ANT.UMUX
8-times UHF Antenna Multiplexer
OBID
i-scan
®
UHF
Installation
ID ISC.ANT.UMUX
FEIG ELECTRONIC GmbH Page 2 of 19 M71100-3e-ID-B.docx
Note
Copyright 2013 by
FEIG ELECTRONIC GmbH
Lange Strasse 4
D-35781 Weilburg
Tel.: +49 6471 3109-0
http://www.feig.de
With the edition of this document, all previous editions become void. Indications made in this manual may be
changed without previous notice.
Copying of this document, and giving it to others and the use or communication of the contents thereof are
forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved
in the event of the grant of a patent or the registration of a utility model or design.
Composition of the information in this document has been done to the best of our knowledge. FEIG
ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this
manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since,
despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips.
The instructions given in this manual are based on advantageous boundary conditions. FEIG ELECTRONIC
GmbH does not give any guarantee promise for perfect function in cross environments and does not give
any guaranty for the functionality of the complete system which incorporates the subject of this document.
FEIG ELECTRONIC call explicit attention that devices which are subject of this document are not designed
with components and testing methods for a level of reliability suitable for use in or in connection with surgical
implants or as critical components in any life support systems whose failure to perform can reasonably be
expected to cause significant injury to a human. To avoid damage, injury, or death, the user or application
designer must take reasonably prudent steps to protect against system failures.
Use Exclusion in Transportation Market: Devices which are subject of this document may NOT be sold,
used, leased, offer for sale, or otherwise transferred, exported, and imported by anyone in the Transportation
Market. “Transportation Market” means (i) Electronic Toll and Traffic Management (ETTM), (ii) Public Sector
Vehicle Registration, Inspection and Licensing Programs, (iii) Railroad Locomotive and Wagon tracking, (iv)
airport based ground transportation management systems (GTMS) and taxi dispatch, (v) revenue based
parking, and (vi) vehicle initiated mobile payment applications, where the RFID sticker/tag is initially attached
to the vehicle but not incorporated at the point of vehicle manufacture.
FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this docu-
ment and makes no representation that they free of patent infringement. FEIG ELECTRONIC GmbH does
not convey any license under its patent rights nor the rights of others.
OBID®and OBID i-scan®are registered trademarks of FEIG ELECTRONIC GmbH.
OBID
i-scan
®
UHF
Installation
ID ISC.ANT.UMUX
FEIG ELECTRONIC GmbH Page 3 of 19 M71100-3e-ID-B.docx
General information's regarding this document
•The sign "" indicates extensions or changes of this manual compared with the former issue.
•If bits within one byte are filled with "-", these bit spaces are reserved for future extensions or
for internal testing- and manufacturing-functions. These bit spaces must not be changed, as this
may cause faulty operation of the reader.
•The following figure formats are used:
0...9: for decimal figures
0x00...0xFF: for hexadecimal figures,
b0...1 for binary figures.
•The hexadecimal value in brackets "[ ]" marks a control byte (command).
OBID
i-scan
®
UHF
Installation
ID ISC.ANT.UMUX
FEIG ELECTRONIC GmbH Page 4 of 19 M71100-3e-ID-B.docx
Contents
1. Safety Instructions / Warning - Read before start-up ! 6
2. Performance Features oft he ID ISC.ANT.UMUX 8 times UHF Antenna Multiplexer 7
2.1. Performance Features.......................................................................................................7
2.2. Scope of Delivery ..............................................................................................................7
2.3. Available Multiplexer Types..............................................................................................7
3. Wiring and Installation 8
3.1. Dimensions........................................................................................................................8
3.2. Terminals and Jacks .........................................................................................................9
3.2.1. Supply Voltage.............................................................................................................9
3.2.2. Reader Connection - IN .............................................................................................10
3.2.3. Antenna Connection – OUT 1 - 8...............................................................................10
3.2.4. Boot Loader Interface – X2 ........................................................................................10
4. Operating and Display Elements 11
4.1. LEDs.................................................................................................................................11
4.2. Reset Button T1...............................................................................................................11
4.3. DIP Switch S1 ..................................................................................................................12
4.3.1. Hardware Address setting..........................................................................................12
4.3.2. DC Coupling ..............................................................................................................12
5. Troubleshooting 13
6. Technical Data 14
7. Radio Approvals 16
7.1. Europe (CE)......................................................................................................................16
7.2. Declaration of Conformity (Directive 1999/5/EC - R&TTE)............................................17
OBID
i-scan
®
UHF
Installation
ID ISC.ANT.UMUX
FEIG ELECTRONIC GmbH Page 5 of 19 M71100-3e-ID-B.docx
ANNEX 18
ANNEX A - Accessories.........................................................................................................18
ANNEX A1 – Wall Mount Kit ID ISC.MS.MR/PR-A...............................................................19
OBID
i-scan
®
UHF
Installation
ID ISC.ANT.UMUX
FEIG ELECTRONIC GmbH Page 6 of 19 M71100-3e-ID-B.docx
1. Safety Instructions / Warning - Read before start-up !
•The device may only be used for the intended purpose designed by for the manufacturer.
•The operation manual should be conveniently kept available at all times for each user.
•Unauthorized changes and the use of spare parts and additional devices which have not been
sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such
unauthorized measures shall exclude any liability by the manufacturer.
•The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid
for the device. The manufacturer shall not be held legally responsible for inaccuracies, errors,
or omissions in the manual or automatically set parameters for a device or for an incorrect
application of a device.
•Repairs may only be executed by the manufacturer.
•Installation, operation, and maintenance procedures should only be carried out by qualified
personnel.
•Use of the device and its installation must be in accordance with national legal requirements
and local electrical codes .
•When working on devices the valid safety regulations must be observed.
•Special advice for carriers of cardiac pacemakers:
Although this device doesn't exceed the valid limits for electromagnetic fields you should keep
a minimum distance of 25 cm between the device and your cardiac pacemaker and not stay in
an immediate proximity of the device respective the antenna for some time.
OBID
i-scan
®
UHF
Installation
ID ISC.ANT.UMUX
FEIG ELECTRONIC GmbH Page 7 of 19 M71100-3e-ID-B.docx
2. Performance Features oft he ID ISC.ANT.UMUX 8 times UHF Antenna Multiplexer
2.1. Performance Features
The ID ISC.ANT.UMUX 8x UHF antenna multiplexer is designed for switching RFID antennas hav-
ing an operating frequency of 860 MHz – 960 MHz. An ID ISC.ANT.UMUX allows multiple individ-
ual antennas to be operated with just a single reader antenna output.
It is possible to cascade several ID ISC.ANT.UMUX to increase the number of possible antenna
connections. Here the antenna multiplexers are addressed using DIP switch settings.
2.2. Scope of Delivery
The following components are included in the scope of delivery:
•1 x ID ISC.ANT.UMUX 8x UHF antenna multiplexer
•1 x Installation Guide
2.3. Available Multiplexer Types
The following Multiplexers are currently available:
Table 1: Multiplexer types
Multiplexer type
Description
ID ISC.ANT.UMUX-A UHF Multiplexer in IP30 case
OBID
i-scan
®
UHF
Installation
ID ISC.ANT.UMUX
FEIG ELECTRONIC GmbH Page 8 of 19 M71100-3e-ID-B.docx
3. Wiring and Installation
3.1. Dimensions
The antenna multiplexer is designed for an indoor environment. It can be wall-mounted, in this
case the wall mounting kit should be ordered separately. (see ANNEX A - Accessories and ANNEX
A1 – Wall Mount Kit ID ISC.MS.MR/PR-A)
Figure 1: Enclosure (all dimensions in mm)
OBID
i-scan
®
UHF
Installation
ID ISC.ANT.UMUX
FEIG ELECTRONIC GmbH Page 9 of 19 M71100-3e-ID-B.docx
3.2. Terminals and Jacks
Figure 2 shows the terminals, jacks, DIP switches and LED indicators.
Figure 2: Terminals, jacks and operating elements
3.2.1. Supply Voltage
The supply voltage is connected to X1 or directly to the Reader Connection IN. Configure the po-
larity for X1 as shown in Figure 2. The antenna multiplexer operates with a DC voltage of 12 V DC
to 24 V DC. In a configuration with cascaded multiplexers you could supply the connected multip-
lexers directly over the antenna cable. In this case only the first multiplexer has to be connect to an
power supply unit.
NOTE:
If connected to the UHF Long Range Reader ID ISC.LRU3500 the supply voltage for a mul-
tiplexer in the first cascade level could also be provided from the reader via the antenna
cable. The use of an additional external power supply is only necessary if several multip-
lexers should be cascaded after each other.
T1
S1
GND
VCC
X2
X1
IN
OUT1 OUT2 OUT3 OUT4
OUT8 OUT7 OUT6 OUT5 V1 V2 V3 V4
OBID
i-scan
®
UHF
Installation
ID ISC.ANT.UMUX
FEIG ELECTRONIC GmbH Page 10 of 19 M71100-3e-ID-B.docx
3.2.2. Reader Connection - IN
The connection to a reader is made using coaxial cable to the SMA jack IN. The maximum
tightening torque of the SMA jack is 0,45 Nm (4.0 lbf in).
The transmitting power at reader connection IN must be at least 85 mW.
3.2.3. Antenna Connection – OUT 1 - 8
The antennas or further multiplexers are connected using coaxial cable to the SMA jacks OUT1-8.
The maximum tightening torque of the SMA jacks is 0,45 Nm (4.0 lbf in).
3.2.4. Boot Loader Interface – X2
To perform a firmware update you have to connect the update cable ID CAB.RS-B with X2 as
shown in Fig. 3. The tuning board must be powered through the antenna cable on IN or through
the terminal X1 as it is done in the normal operation mode. See also 3.2.1. Supply Voltage
Figure 3: Connection of the Update Cable
The procedure of the firmware update is described in Application Note ID ISC.ANT.UMUX – Firm-
ware Update (N80301-xe-ID-B).
Indice
Altri manuali Feig Electronic Multiplexer
