Fein ASW 14-30-PC Guida all'installazione
ASW 14-30-PC
C-SC_CSSM VERSION 1.0 14-07-22 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. 1/53
Repair instructions
ASW 14-30-PC
C-SC_CSSM VERSION 1.0 14-07-22 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. 2/53
1. Models described
2. Technical data
3. Notes / requirements
4. Tools required
5. Lubricants and auxiliary substances required
6. Disassembly
7. Assembly
8. Troubleshooting
9. Connection diagram
Contents
ASW 14-30-PC
C-SC_CSSM VERSION 1.0 14-07-22 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. 3/53
These instructions describe how to repair the following models:
Model Order no.
ASW 14-30-PC 7 112 53 00 95 0
1. Models described
ASW 14-30-PC
C-SC_CSSM VERSION 1.0 14-07-22 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. 4/53
2. Technical data
Technical data
The complete technical data can be found in the operating instructions for the model.
Test data
Up-to-date test data for all models can be found on the FEIN Extranet (Customer Service → Repair Guides).
Lubricants
The lubricants and container sizes available from FEIN can be found on the FEIN Extranet
(Customer Service → Repair Guides).
Lists of spare parts
Lists of spare parts and exploded views are available online at www.fein.com
ASW 14-30-PC
C-SC_CSSM VERSION 1.0 14-07-22 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. 5/53
3. Notes / requirements
Note
These instructions are only intended for persons with suitable technical training. It is assumed
that the reader has mechanical and electrical training.
Only use original FEIN spare parts!
Requirements
Please note that power tools may only be repaired, maintained and checked by a trained
electrician, as improper repair can result in serious risks to the user.
The provisions set out in DIN VDE 0701-0702 should be observed after repairs.
The relevant accident prevention regulations of the employers’ liability insurance associations are
to be observed when commissioning.
The German Equipment and Product SafetyAct applies for correct use.
Outside Germany, the regulations applicable in the relevant country must be observed!
ASW 14-30-PC
C-SC_CSSM VERSION 1.0 14-07-22 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. 6/53
3. Notes / requirements
WARNING!
Damage from electrostatic charging.
Failure to comply with the safety regulations for ESD protection may cause tool damage.
Only undertake assembly/disassembly work on the tool at a workplace with
ESD protection.
ASW 14-30-PC
C-SC_CSSM VERSION 1.0 14-07-22 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. 7/53
Standard tool Special tools
- Torx 10 screwdriver
- Small slotted screwdriver
- Circlip pliers
- Circlip pliers (ground)
- Open-ended spanner, WAF 27, 32
- Flat nose pliers
- Feeler gauge
- Spring balance
- Torque wrench 3 21 23 002 00 6
- Drawing-off socket cap 6 41 04 150 00 8
- Puller 6 41 07 019 00 7
- Adjustable pin wrench 6 29 10 029 00 7
NOTE
You can only order special tools with an order number from FEIN.
4. Tools required
ASW 14-30-PC
C-SC_CSSM VERSION 1.0 14-07-22 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. 8/53
Lubricants
ASW
Grease 3 21 600 14 23 0 0.6g Tool holder; switch ring; cam ring
5. Lubricants and auxiliary substances required
Auxiliary substances
Loctite 638
ASW 14-30-PC
C-SC_CSSM VERSION 1.0 14-07-22 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. 9/53
6. Disassembly
Removing angled head
1. Grip thread ring (1) and unscrew angled head (2) (left-handed thread). Tools:
- Open-ended spanner,
WAF 27
- Open-ended spanner,
WAF 32
2
1
ASW 14-30-PC
C-SC_CSSM VERSION 1.0 14-07-22 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. 10/53
6. Disassembly
Removing angled head
1. Take off angled head (1).
2. Remove connector (2). Tools:
- Open-ended spanner,
WAF 27
- Open-ended spanner,
WAF 32
2
1
Indice
Altri manuali Fein Utensili elettrici
Fein
Fein ASCM12 Manuale utente
Fein
Fein 7 229 43 Manuale utente
Fein
Fein MM700-1.7 Manuale utente
Fein
Fein Slugger JMU 404 M Manuale utente
Fein
Fein FMT250Q Manuale utente
Fein
Fein MultiMaster AMM 500 Plus Top AS Manuale utente
Fein
Fein KFH17-8 Series Manuale utente
Fein
Fein SCT5-40X Manuale utente
Fein
Fein ASM 9 Manuale utente
Fein
Fein 7 232 32/BLK 1.6 Guida all'installazione
Fein
Fein CCG18-115-10PD-SEC AS Series Manuale utente
Fein
Fein AFMM 14 Guida all'installazione
Fein
Fein AKFH18-5 Series Manuale utente
Fein
Fein BLK1.3TE Manuale utente
Fein
Fein Sheet Metal Shear BLs 2.5 Manuale utente
Fein
Fein AMM700 1.7Q AS Manuale utente
Fein
Fein ASse 636II-28bT Kinetik Guida all'installazione
Fein
Fein AFMT12 Manuale utente
Fein
Fein ASye 636 Kinetik Manuale utente
Fein
Fein ASg 658 Manuale utente
