FeiYu Tech VB 4SE Manuale utente
3-Axis Handheld Gimbal for Smartphone Manual EN V 1.0
Contents
1. Overview ………………………………………………………… 2
2. Quick Experience ……………………………………………… 3
3. Charging ………………………………………………………… 4
4. Landscape & Portrait Mode Switching ……………………… 4
5. Tripod …………………………………………………………… 5
6. Connection ……………………………………………………… 5
7. Common Operation …………………………………………… 9
8. Mode Introduction ……………………………………………… 12
9. Operation mode ………………………………………………… 13
10. Indicator ………………………………………………………… 14
11. Protection mechanism ……………………………………… 16
12. Gimbal Initialization …………………………………………… 16
13. Specications ………………………………………………… 17
1
VB 4 is a three-axis handheld gimbal suitable for smartphone. It is small and
foldable. The gimbal supports landscape and portrait shooting, which can also
control phone shooting.
Suggestion
Feiyu VB 4 includes below information, please read the information before using
the gimbal:
1. Quick start guide
2. Online instruction
Tutorial
·The tutorial videos can be watched at FeiyuTech ocial website or scan the QR
code below.
https://www.feiyu-tech.com/play/
· Watch tutorials in video skill page on Feiyu ON.
Download the Feiyu ON App
Scan the QR code to download the app, or search for "Feiyu ON" in the App Store
or Google Play.
* Requires iOS 9.0 or above, Android 6.0 or above.
iOS Android
2
1. Overview
[1]
[8]
[6]
[5]
[7][3]
[2]
[4] [18]
[19]
[20]
[21]
[22]
[23]
[10][9]
[12]
[13]
[14]
[16]
[11]
[17]
[15] [24]
[1] Roll axis
[2] Cross arm
[3] Tilt axis
[4] Vertical arm
[5] Pan axis
[6] Trigger button
(custom functions in App)
[7] USB-C port for accessories
[8] Limitation
[9] Status/Battery indicator
[10] Bluetooth indicator
[11] Follow status indicator
[12] Joystick
[13] Knob
[14] Knob function switching button
[15] Album button
[16] Shutter button
[17] M button (custom functions in App)
[18] Smartphone holder
[19] Magnetizable nameplate
[20] Power button
[21] USB-C port
[22] Handle (built-in battery)
[23] 1/4 inch thread hole
[24] Tripod
* This product dose NOT include smartphone.
3
2. Quick Experience
Step 1: Unfold and fold
Step 2: Smartphone Installation
It is recommended to remove the smartphone case before installation.
Keep the logo of the smartphone holder upward. Install the smartphone when the
gimbal is power o. Keep the smartphone holder in center.
If the smartphone tilted, please move the smartphone left or right to make it
horizontal.
LOGO ▲
4
Step 3: Power ON/OFF/Standby
It is recommended to install your smartphone and balance gimbal
before power on the gimbal.
Power ON/OFF: Long press the power button and release it when you hear the
tone.
Enter standby mode: Double tap the power button to enter standby mode. Tap
again to wake up.
3. Charging
Please fully charge the battery before power on the gimbal for the
rst time.
If the battery is too low, red light will ash fast, please charge the
gimbal immediately.
Connect the USB-C cable to charge. The indicator light is yellow while charging,
and turn green after charging complete.
4. Landscape & Portrait Mode Switching
Double click the M button or manually rotate the smartphone holder to switch
between landscape and portrait mode.
Do not make anti-clockwise rotation in landscape mode, Do not make clockwise
rotation in portrait mode.
5
5. Tripod
The tripod is attached to the bottom of the gimbal in a rotating manner. According
to the needs of shooting, choose whether to install it.
6. Connection
6.1 Bluetooth Connection
Turn on the gimbal.
Method one: Download and install Feiyu ON App, run the App, follow the prompts
to turn on and connect with the Bluetooth.
Method two: Turn on the smartphone Bluetooth, connect the gimbal Bluetooth in
the setting of phone, e.g. FY_VB4_XX.
If fail to nd the Bluetooth:
Method one: Shut down the App in the background.
Method two: Move downward the joystick and triple tap the power button at the
same time to reset the Bluetooth connection of gimbal. (And the Bluetooth can
only be reconnected after reboot the gimbal)
6.2 App Connection
6.2.1 Download the Feiyu ON App
Photo / Video Free panorama Ultra -wide angle 180° panora
360° panorama Overlapping image Light rail
mode
Quick
panorama
6
Static timelapse Track timelapse Dolly Zoom Light rail
VIdeo
Video editing Firmware Upgrade ……
Scan the QR code to download the app, or
search for "Feiyu ON" in the App Store or
Google Play.
* Requires iOS 12.0 or above, Android 8.0 or
above.
iOS Android
6.2.2 Operation of App
Steps:
(1) Enable Bluetooth on the smartphone ( Smartphone-Setting-Bluetooth). (Please
refer to chapter 7.1)
(2) Log in Feiyu ON App (Register for the rst time).
(3) Install smartphone on gimbal, then turn on gimbal.
(4) Search gimbal on App, and tap "FY_VB4_xx" to connect, it will show
"connection succeed" after a while.
(5) You can control the gimbal via App, including remote control the gimbal to
move, switch follow modes and set parameters, etc.
If the connection timeout or fail, please check the Bluetooth connection. Or try to
exit and log in the App again.
7
a. Shooting Interface / Control Interface
Shooting Interface
In photo mode In video mode
2
1
5
3
4
12
6
7a 8a 9 10 11 7b 8b
1. Homepage
2. Album
3. Setting - Advanced settings
4. Gimbal information
5. Follow focus
6. Zoom
7a. Photo mode, tap to switch to video
mode
7b. Video mode, tap to switch to photo
mode
8a. Sub-mode of photo mode, tap to
expand submenu
8b. Sub-mode of photo mode, tap to
expand submenu
9. Shutter
10. Switch between front and rear
camera
11. Camera setting
12. Submenu
8
Control Interface
13
17
14
15
16
18
19
20 21 22
4FY_VB4_XX
4. Gimbal information
13. Remote Control
14. Upgrade
15. Tutorial
16. Settings
17. Set waypoints for timelapse
18. Reset
19. Virtual Joystick
20. Pan mode
21. Follow Mode
22. All follow Mode
b. Firmware Upgrade
Upgrade type introductions:
Keyboard rmware update Fix/update or newly add button/touch screen/
interaction functions.
Bluetooth rmware update Fix/update or newly add Bluetooth functions.
Gimbal rmware update Fix/update or newly add gimbal control/
function/ parameter and etc.
How to update:
· Before starting an update, make sure that the battery level at least medium
level.
·Connect VB 4SE with Feiyu ON App, you will be prompted if a new rmware is
available. Please follow the steps below to update it.
(1) Tap upgrade ICON on App.
Altri manuali per VB 4SE
1
Indice
Altri manuali FeiYu Tech Accessori per fotocamere
FeiYu Tech
FeiYu Tech AK2000 Manuale utente
FeiYu Tech
FeiYu Tech SPG Manuale utente
FeiYu Tech
FeiYu Tech G6 Plus Manuale utente
FeiYu Tech
FeiYu Tech vimble 2 Manuale utente
FeiYu Tech
FeiYu Tech FY-G3 Ultra Manuale utente
FeiYu Tech
FeiYu Tech FY G4 Manuale utente
FeiYu Tech
FeiYu Tech G5 Manuale utente
FeiYu Tech
FeiYu Tech WG MINI Manuale utente
FeiYu Tech
FeiYu Tech G360 Manuale utente
FeiYu Tech
FeiYu Tech G6 Guida all'installazione
FeiYu Tech
FeiYu Tech vimble 2 Istruzioni operative
FeiYu Tech
FeiYu Tech SCORP Pro F4 Manuale utente
FeiYu Tech
FeiYu Tech G360 Manuale utente
FeiYu Tech
FeiYu Tech AKFI Manuale utente
FeiYu Tech
FeiYu Tech SPG Manuale utente
FeiYu Tech
FeiYu Tech SPG Manuale utente
FeiYu Tech
FeiYu Tech Double-hand foldable set Manuale utente
FeiYu Tech
FeiYu Tech AK2000S Manuale utente
FeiYu Tech
FeiYu Tech AK4500 Manuale utente
FeiYu Tech
FeiYu Tech a1000 Manuale utente
