PART I OPERATING INSTRUCTION
POWER ON/OFF
Radio will be considered as default setting for first time using; next time will automatic go
to the memorized position (CD, USB, SD, Radio position) unless AC off.
(1) Power on: Press the power button to turn the unit on when the ignition switch is on.
(2) Power off: Press and hold the power button to turn the unit off during playing position
MODE CONVERSION
Press MOD button to select a different mode of operation as indicated on the display
panel. Available modes include Radio, Disc, USB, SD and Auxiliary Input. Press MOD
button to change the playing mode in following order: RADIO-CD-USB-SD-AUX IN
Note : it can’t show USB/ SD mode if no these connection.
VOLUME KNOB CONTROL
When power on, the unit will be in memorized volume level. Rotate the VOLUME knob and
volume level mark (from level 0 to 40) will display on the screen. Press any button to
escape from volume operation.
(1) Increase volume: Rotate the volume button clockwise and the volume increases
gradually till reach level 40
(2) Decrease volume : Rotate the volume button Anticlockwise and the volume decreases
gradually till reach level zero
Press the VOLUME knob to step through the menu of audio function: BAS(bass),
TRE(treble), BAL(balance), FAD(fader), LOUD, EQ. When adjusting audio functions, the
unit will automatically exit select mode and return to the normal display after five seconds
or when another function is activated.
Bass
Press VOLUME knob till "BAS" display on the screen, then within 5 seconds rotate volume
knob to adjust bass from "-7" to "7", the bass level will be shown on the display for five
seconds or until another function is activated.
Treble
press VOLUME knob two times till "TRE" display on the screen, then within 5 seconds
rotate volume knob to adjust treble from "-7" to "7", the treble level will be shown on the
display for five seconds or until another function is activated.
Balance
press VOLUME knob three times till "BAL" display on the screen, then within 5 seconds
rotate volume knob to adjust balance between the right and left speakers from "BAL
10R(full right)" to "BAL 10L"(full left). "BAL L=R" represents an equal balance level
between the right and left speakers. The balance position is shown on the display for five
seconds or until another function is activated.
Fader
press VOLUME knob four times till "FAD" display on the screen, then within 5 seconds
rotate volume knob to adjust fader between the front and rear speakers from "FAD 10F(full
front)" to "FAD 10R"(full rear). "FAD F=R" represents an equal balance level between the
front and rear speakers. The fader position is shown on the display for five seconds or until
another function is activated.
LOUDNESS
Press VOLUME knob five times till LOUD display on the screen then within five seconds
rotate the volume knob to change the mode from "LOUD ON" and "LOUD OFF". When
listening to music at low volume levels, this feature will boost the bass and treble ranges to
compensate for the characteristics of human hearing.
