Feniex C-4200-DL Manuale utente
FENIEX // V3.1 // INSTRUCTION MANUAL
WEB // www.feniex.com
Feniex Product Copyrights This price List and the mentioned Feniex products include or describe copyrighted Feniex material. Laws in the United States and other countries
preserve for Feniex Industries and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make
derivative works of the copyrighted material. Accordingly, any copyrighted material of Feniex and its licensors contained herein or in the Feniex products described in this Price
List may not be copied, reproduced, distributed, merged or modied, transmitted, transcribed, stored in retrieval system or translated into any language or computer language,
in any form or by any means, without prior written permission of Feniex Industries, Inc.. Feniex and the stylized Feniex logo are registered in the U.S. Patent & Trademark Oce.
C-4200-DL
INSTRUCTION MANUAL
Safety Regulations & Warranty 3
Service after Expiration 3
Copyright 3
Feniex Product Copyright 3
Box Contents, Specications, & Wiring Diagram 4
Box Contents 4
Wig-Wag Flash Patterns 4
System Specications 4
Dimensions 4
Power & Conguration 5
Power 5
Auto Power On 5
Wiring Diagram 5
Latching or Momentary Buttons 5
Alternating Wig-Wag Flasher 5
Wig-Wag Functions 5
Mounting Instructions 6
Swivel Mount Installation 6
L-Bracket Installation 6
Button Legend Sheet 7
TABLE OF CONTENTS TM
FENIEX // INSTRUCTION MANUAL
WEB // www.feniex.com
2
SAFETY REGULATIONS
The following provides all the information necessary to
safely operate the previously listed products of Feniex
Industries, Inc. Please read this manual thoroughly before
installing or operating your new product in order to
prevent any damage or injury. Failure to follow the listed
instructions in this manual may result in damage to your
products or personal injury.
• Proper installation of this product requires good
knowledge of automotive systems, electronics &
procedures.
• Please guarantee all vital components of the vehicle
are not in danger of being damaged by drilling holes
necessary for installation. Check all sides of the
mounting surface before drilling any holes into the
vehicle.
• Do not install this product in any way that interferes
with the deployment of the air bag. Doing so may
damage the eectiveness of the air bag & can lead to
serious personal and vehicle injury. The installer will
assume full responsibility of proper installation of the
new unit.
• Please clean the mounting surface before installation
of the unit when using tape, brackets, magnet, Velcro or
suction cups.
• The product’s ground wire must be connected directly
to the negative (-) battery post for eective use of the
unit. Please follow all wiring guidelines provided to
guarantee long lifespan & productivity. Failing to follow
these instructions may result in damage to the product.
WARRANTY
Feniex Industries, Inc. warrants to the original purchaser
that the product shall be free from defects in material &
workmanship for 2 years from the date of purchase for all
Public Works products.
If warranty service is needed, please contact customer
support:
Phone: 1.800.615.8350
Web Site: www.Feniex.com/support
Email: techsupport@feniex.com
If the product needs to be returned for repair or
replacement, contact our customer service team (using
any method listed above) to receive a Return Merchandise
Authorization (RMA) number. Operational times are from 9
a.m. to 6 p.m. central time, Monday through Friday.
CONDITIONS
Feniex Industries, Inc. will not be held responsible for any
costs associated with equipment removal and/or
re-installation resulting from a warranty claim. It is the sole
responsibility of the party initiating a warranty claim to pay
shipping charges associated with returning a product to
Feniex Industries for repair or replacement.
SERVICE AFTER EXPIRATION
Feniex Industries will still provide service for all products
after expiration of the warranty. For any issues, call the
customer support line. In some instances it may be
necessary for the product to be shipped, freight prepaid
and insured for loss or damage to Feniex headquarters.
SAFETY REGULATIONS & WARRANTY
Utilizing non-factory screws and mounting brackets may result
in the loss of warranty coverage.
COPYRIGHT
This instruction manual and the Feniex products
described in this instruction manual may include or
describe copyrighted Feniex material. Laws in the United
States and other countries preserve for Feniex Industries
and its licensors certain exclusive rights for copyrighted
material, including the exclusive right to copy, reproduce
in any form, distribute and make derivative works of
the copyrighted material. Accordingly, any copyrighted
material of Feniex and its licensors contained herein or in
the Feniex products described in this instruction manual
may not be copied, reproduced, distributed, merged
or modied in any manner without the express written
permission of Feniex Industries, Inc.
FENIEX PRODUCT COPYRIGHTS
The products described in this document are the property
of Feniex Industries, Inc. It is furnished by express license
agreement only and may be used only in accordance with the
terms of such an agreement. Products and documentation
are copyrighted materials. Making unauthorized copies is
prohibited by law. No part of the product or documentation
may be reproduced, transmitted, transcribed, stored in
retrieval system or translated into any language or computer
language, in any form or by any means, without prior
permission from Feniex Industries, Inc.
Please do not send in product without contacting support rst
for a Return Merchandise Authorization (RMA) number.
TM
FENIEX // INSTRUCTION MANUAL
WEB // www.feniex.com
3
SPECIFICATIONS & BOX CONTENTS
DIMENSIONS
COMPONENT
QUANTITY
1. 4200 Data Link Relay 1
2. 4200 Data Link Keypad 1
3. Keypad Bail Bracket 1
4. Ethernet Cable 2
5. USB Cable 1
6. Button Legends 4 Sheets
SYSTEM SPECIFICATIONS
Input Power 11 - 16 VDC
Max Input Current 60 Amps
Maximum Output 60 Amps
Standby Current 100mA +/-
External Fuse 125% of Circuit Load
Programmable Inputs 2 Ground, 3 Positive
System Inputs Ignition, Day, Night
Relays
Solid State, Built-in
Switch Type
Latching, Momentary, Timed
Buttons
Rubberized, Backlit, 2 Colors
Button Legends
4 Sheets
Relay Dimensions
6.3" W x 3.3" H x 4.4" D
Keypad Dimensions
6.9" W x 4.6" H x 1.0" D
Bluetooth Dimensions
3.2" W x 1.5" H x 0.9" D
Bluetooth Range
35 - 40ft
Warranty
2 Years
WIG-WAG FLASH PATTERNS
Single Flash [Slow] Quad Flash [Slow]
Single Flash [Fast] Quad Flash [Fast]
Single Flash [Combo] Quad Flash [Combo]
Triple Flash [Slow] Combination #1
Triple Flash [Fast] Combination #2
Triple Flash [Combo] Highbeam Override 4.6"
6.9"
1.0"
3.3" 4.4"
6.3"
Important: Make sure to provide 12v+ into the "Ignition Input"
(Input H).
TM
FENIEX // INSTRUCTION MANUAL
WEB // www.feniex.com
4
CONNECTION DIAGRAM
PIN FUNCTION POLARITY
1 Headlight Flasher, Channel 1 12v (+)
2 Headlight Flasher, Channel 2 12v (+)
3 Programmable Output #3 12v (+)
4 Programmable Output #4 12v (+)
5 Programmable Output #5 12v (+)
6 Programmable Output #6 12v (+)
7 Programmable Output #7 12v (+)
8 Programmable Output #8 12v (+)
9 Programmable Output #9 12v (+)
10 Programmable Output #10 12v (+)
RJ45 RJ45
DataLink Products
Fusion Series Lightbars
Geo Series Lightbars
Storm Pro 100w
Storm Pro 200w
Postive Battery Terminal
Negative Battery Terminal
PIN FUNCTION POLARITY
11 Programmable Output #11 12v (+)
12 Programmable Output #12 12v (+)
13 Programmable Output #13 12v (+)
14 Programmable Output #14 12v (+)
15 Programmable Output #15 12v (+)
16 Programmable Output #16 12v (+)
17 Programmable Output #17 12v (+)
18 Programmable Output #18 12v (+)
19 Programmable Output #19 12v (+)
20 Programmable Output #20 12v (+)
PIN FUNCTION POLARITY
A Programmable Input 12v (-)
B Programmable Input 12v (-)
C Programmable Input 12v (+)
D Programmable Input 12v (+)
PIN FUNCTION POLARITY
E Programmable Input 12v (+)
F Programmable Input [Night Mode] 12v (+)
G Programmable Input [Day Mode] 12v (+)
H Programmable Input [Ignition] 12v (+)
Inputs A-H
Wig-Wag Outputs
TM
FENIEX // INSTRUCTION MANUAL
WEB // www.feniex.com
5
MOUNTING INSTRUCTIONS
SWIVEL MOUNT INSTALLATION
1) Secure the Swivel Ball to the base of the controller
using the #10 screw.
2) Attach the swivel ball to the swivel bracket base using
the #10 screw.
3) Using the #10 screw, secure the two clamps loosely
together.
4) Place the clamps and screw around the 2 swivel balls.
Tighten the clamp screw, thereby attaching the swivel
bracket base to the mini controller.
5) Secure the Swivel Bracket to the rear of the controller
(as shown in the diagram).
L-BRACKET INSTALLATION
Note: The provided L-brackets can be mounted either
way, L-inward or L-outward. The instructions reect the
default mounting method: L-outward.
1) Utilizing the provided screws, secure the L-Bracket to
the side of the controller using a Phillips head screwdriver.
2) Repeat Step 1 on the opposite side of the controller so
both sides have the L-Bracket securely connected.
3) Place the unit against the intended mounting surface.
4) Mark the areas where the mounting holes will be drilled.
If the mounting surface is part of the vehicle, make sure
no vital components could be damaged by the drilling
process.
5) Drill two mounting holes on the mounting surface,
making sure no vital components of the surface are
damaged.
6) Using customer supplied screws, secure the 4200 Mini
to the mounting surface.
6) Place the unit against the intended mounting surface.
7) Mark the areas where the mounting holes will be drilled.
If the mounting surface is part of the vehicle, make sure
no vital components could be damaged by the drilling
process.
8) Drill two mounting holes on the mounting surface,
making sure no vital components of the surface are
damaged.
9) Using customer supplied screws, secure the 4200 Mini
to the mounting surface.
OPTION B: SURFACE MOUNT
1) Mount the U-Shaped Bracket in the desired location
using 2 self-tapping screws. If you wish to use machine
screws, simply drill out the required hole size based on the
size of screw choice.
Important! Make sure not to damage any vital parts of the
vehicle or mounting surface. Do not mount anywhere that
interferes with the vehicle air bag.
2) Re-attach the control panel head to the U-Shaped
bracket utilizing the factory provided screws.
3) Connect the RJ45 cable to the RJ45 port located on
the rear of the controller.
TM
FENIEX // INSTRUCTION MANUAL
WEB // www.feniex.com
6
CONFIGURATION RECORD
Outputs: Buttons: (1 - 18, P1 - P3)
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 P1
20 P2
P3
Input/Polarity:
A (-) F- Night (+)
B (-) G- Day (+)
C (+) H- Ignition (+)
D (+)
E (+)
Use this page to record the products connected to each outlet to assist when programming the control head with the provided software package.
TM
FENIEX // INSTRUCTION MANUAL
WEB // www.feniex.com
7
BUTTON LEGENDS
Fuse 1
Outputs 1 - 4
Fuse 2
Outputs 5 - 8
Fuse 3
Outputs 9 - 12
Fuse 4
Outputs 13 - 16
Fuse 5
Outputs 17 - 20
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Ignition Input
Day Mode [Keypad]
Night Mode [Keypad]
Positive Programmable Input
Negative Programmable Input
H
G
F
E
D
C
B
A
Input Examples
• Highbeam Override
• Park-Kill
• Reverse Override
The ignition input must be activated before the system can be
used to control attached equipment.
Tip: Once the appropriate ignition input is connected, install
a small jumper wire between inputs H & G to activate keypad
backlight in "Day Mode".
TM
FENIEX // INSTRUCTION MANUAL
WEB // www.feniex.com
8
BUTTON LEGENDS
Driver's Side Highbeam
Passenger's Side Highbeam
Body Control Module
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
H
G
F
E
D
C
B
A
Highbeam Override
Using the programming software, congure
Input E (in this example) to "Highbeam Override"
(see page 17).
TM
FENIEX // INSTRUCTION MANUAL
WEB // www.feniex.com
9
PROGRAMMING SOFTWARE
To program the Feniex 4200 Controller, rst visit
feniex.com to download the software.
Help
For assistance on how to use the software, please click
the help button located on the top bar in the software
interface. You will nd informative videos on how to
program every function of the 4200 software system.
1) Connect the provided USB wire to the controller, and
connect the other end of the USB port to the computer.
2) When the controller is plugged in, the red box reading
"Device Disconnected" will change from Red to Green will
read: "Device connected."
Ports 1-20 can be activated by:
• Button
• Input
• Slide Switch (p1, p2, p3)
3) Activate Ports
Select button, input or slide switch and then check the box
of the desired port. You can select as many ports as need-
ed with each button programmed. Each output is capable
of 10 amps. For any product requiring more than 10 amps,
use multiple ports to split the load.
For example: For a spotlight that requires 15 amps, select
the desired button on the controller then use 2 ports to
split the load. Don't exceed 30 amps per fuse quadrant.
4) Activate Button
This function programs the slide switch (p1, p2, p3) or
inputs A-E to activate a button. Please note a button
cannot activate another button. Multiple buttons can be
activated through the slide switch or input set up.
TM
FENIEX // INSTRUCTION MANUAL
WEB // www.feniex.com
10
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Feniex Controllori
