Fermax AC-MAX Manuale utente

Cod. 970078I-1 V12_19

P a g e 1 | 8

GUIDE-1 AC-MAX KITS INSTALLATION-WIRING

GUIDE

Note: This document refers to this AC-MAX installation example.

Introduction

This document indicates step by step how to start up a two/four door AC-MAX installation

using both Wiegand readers and ref. 5225 FPAC-MAX RS485 fingerprint readers.

For this we will use for the guide a kit of 2 doors and 3 readers. In door 1 we will use 2 readers

one entrance for another one exit, and in door 2 an entrance reader.

Using the following elements.

•Access controller AC-MAX-CU-KIT-2 (kit ref. 5223)

•2 x RS485 FINGERPRINT readers FPAC-MAX (Ref. 5225) (As input reader and output

reader for Door 1).

•1 x WIEGAND reader (Resistant keyboard 5293) (As door 2 input reader)

Door 1

Door 2

Cod. 970078I-1 V12_19

P a g e 2 | 8

Installation-wiring

The following wiring diagrams show how 2 or 4 door kits can be wired. We made the example

with a system of two doors with a door with reader of entry and another one with reader of

entry / exit.

Diagram Example: of an installation whose commissioning is set out in this guide.

Cod. 970078I-1 V12_19

P a g e 3 | 8

Internal prewiring kit

Connection of the power supply to the expander and the expander to the central unit. The use

of the battery is optional and would be connected to the expander in BAT +, BAT-.

Connection of the data bus from terminals A and B of the expander to terminals A1 B1 of the

control unit. As in Diagram 1.

Diagram 1. RS485 data wiring and power supply kit.

Step 1: Installation

Cod. 970078I-1 V12_19

P a g e 4 | 8

Installation steps-Wiring.

Step 1: Connect power to the different readers.

WIEGAND READERS: Hose ref. 5922 (6 wires x 0.5mm2) or UTP CAT5 (1 pair for D0, D1 and

another pair for negative, is recommended up to 100m. Use CAT6 for industrial installations.

READERS RS-485 FPAC-MAX: UTP CAT5 (1 pair for A, B and another pair for negative, up to

100mts, is recommended. Use CAT6 for industrial installations.

Maximum RS-485 distance, up to 1.200m between UC and further fingerprint reader.

Depending on the cable and the power supplies of the installation.

Warning: Do not install the cables near other high voltage or high current cables, especially

230V or more. Use the same pair for lines A, B or D0, D1.

Step2: Connection DATA, of the different readers.

a) WIEGAND READERS: Wire the data of the different wiegand Do and D1 readers

directly to the central unit.

Terminal 5 (First Wiegand reader 1)

D0, D1

IN1, IN2

Terminal 6 (Second Wiegand reader 2)

D0, D1

IN3, IN4

Terminal 7 (Third Wiegand reader 3)

D0, D1

IN5, IN6

Terminal 8 (Fourth Wiegand reader 4)

D0, D1

IN7, IN8

Cod. 970078I-1 V12_19

P a g e 5 | 8

Example of installation of 4 wiegand readers.

Depending on the type of reader selected the wiring is as follows:

Diagram 2. Readers or keypad Resistant Wiegand y proximidad Mifare Skyline, cityline.

Cod. 970078I-1 V12_19

P a g e 6 | 8

Diagram 3. Keypad City, Skyline y Marine Wiegand ref. 5190, 5191 and 5192.

a) RS-485 FINGERPRINT READER FPAC-MAX: If the readers are FPAC-MAX RS485

fingerprint readers, wire to the corresponding data bus depending on the door to be

connected.

Installation Fingerprint Reader FPAC-MAX RS485.

Cod. 970078I-1 V12_19

P a g e 7 | 8

Diagram 4. Example of the installation of 4 fingerprint readers in a 2-door kit. D1-Door 1 and

D2-Door 2. With input fingerprint reader and output fingerprint reader, per door.

Diagram 5. Example of the installation of 8 fingerprint readers in a 4-door kit. D1-Door 1, D2-

Door 2. With input fingerprint reader and output fingerprint reader, per door.

Cod. 970078I-1 V12_19

P a g e 8 | 8

Step3: Connect the accessories of each door.

b) Wire accessories to the expander. Door opener, door contact, exit button. Etc.

Diagram 6. Example of installation of accessories on door 1.

LCK Lock / Normal fuction.

BELL / Bell.

DC / Door contact

DR Door reléase / Push button

Altri manuali per AC-MAX

Indice

Altri manuali Fermax Controllori di accesso IP

Fermax

Fermax 5226 Guida utente

Fermax

Fermax AC-MAX Manuale utente

Fermax

Fermax VDS W Manuale utente

Fermax

Fermax WIEGAND DT-CK Cityclassic Manuale utente

Fermax

Fermax AC-MAX Manuale utente

Fermax

Fermax CITY FINGERPRINT READER Manuale di istruzioni

Fermax

Fermax AC-MAX KIT 2 DOORS Guida utente

Fermax

Fermax ACMAX BOX-IP Guida utente

Fermax

Fermax Memokey 100C Guida utente

Fermax

Fermax SLIM 5255 Manuale utente

Fermax

Fermax MEMOKEY 97023 Istruzioni operative

Fermax

Fermax CITYLINE MEMOKEY Manuale di istruzioni

Manuali Controllori di accesso IP popolari di altre marche

ZKTeco

ZKTeco SpeedFace-V5L Manuale utente

Jantar

Jantar REX A-1-9 Manuale utente

2N Access Unit Foglio di istruzioni

Kedacom

Kedacom KSCA120 Series Manuale utente

H3C

H3C WX2880X Manuale utente

G4S

G4S S870-EX Guida

PRASTEL

PRASTEL M2000PE Manuale utente

Allegion

Allegion interflex IF-281 Cylinder Manuale utente

TECOM

TECOM TS1067E Manuale utente

Software House

Software House iSTAR Pro 2U RM Manuale di istruzioni

AKCP

AKCP SP+ Manuale utente

Bpt

Bpt HNA/102 Manuale utente

Civintec

Civintec CV9601T-T-1F Manuale utente

BioMax

BioMax N-X90W Manuale utente

ZKTeco

ZKTeco OP-200 Manuale utente

FingerTec

FingerTec s-Kadex Manuale utente

H3C

H3C WX5002ACCESSCONTROLLER Manuale utente

C Prox Ltd

C Prox Ltd DPN-2 Manuale utente