Fermax 1088 Manuale utente

INTERFACE TELEFÓNICO

INTERFACE TELEFÓNIC

« TELEPHONE INTERFACE MANUAL »

Ref.1088 - Telephone Interface for ADS systems.

Ref. 4300 - Telephone Interface for 4+N systems.

Technical publication of informative nature edited by FERMAX ELECTRONICA S.A.E.

FERMAX ELECTRONICA S.A.E., in a policy of ongoing enhancement, reserves the right to modify the

contents of this document as well as the features of the products described herein at any time and without

prior notice. Any modifications will be reflected in subsequent editions of this document.

ENGLISH

INTERFACE TELEFÓNICO

INDEX

INTRODUCTION ............................................................................................................................................... 4

CONFIGURATION ............................................................................................................................................. 5

TYPICAL SETUP ........................................................................................................................................... 5

MIXED SETUP ............................................................................................................................................... 5

SETUP WITH TELEPHONE SWITCHBOARD, CONNECTION IN EXTENSIONS ..................................... 6

SETUP WITH TELEPHONE SWITCHBOARD, CONNECTION ON LINE .................................................. 6

INSTALLATION DIAGRAM - CONVENTIONAL SYSTEM (4+n) ..................................................................... 7

INSTALLATION DIAGRAM - ADS SYSTEM ..................................................................................................... 8

PROGRAMMING INSTALLATION PARAMETERS .......................................................................................... 9

PROGRAMMING EXAMPLE 1 .................................................................................................................. 10

PROGRAMMING EXAMPLE 2 .................................................................................................................. 10

PROGRAMMING USER PARAMETERS ........................................................................................................ 11

PROGRAMMING EXAMPLE ..................................................................................................................... 11

OPERATION..................................................................................................................................................... 12

ADDITIONAL OPERATIONS WITH OUTDOOR PANEL ........................................................................... 13

CALL DIVERT FUNCTION.......................................................................................................................... 13

TROUBLESHOOTING ..................................................................................................................................... 14

TECHNICAL FEATURES ................................................................................................................................. 15

INTERFACE TELEFÓNICO

INTERFACE TELEFÓNIC

INTRODUCTION

TheTelephone Interface is supplied in two different versions:

- For Conventional 4+N System (Ref.4300)

Compatible with all Fermax conventional system amplifiers (both electronic call and buzzer)

- For ADS System (Ref.1088)

The maximum number of telephones connected to the Telephone Interface to ensure correct operation is 4

(the same as with telephone companies).

1- Green LED, in use.

Lights up when Interface is being used and blinks

when divert number is keyed in.

2- Yellow LED, programming.

Lights up when programming mode is entered.

3- Red LED, power.

Lights up when power supply is switched on.

4- Contacts for divert switch

Connect switch here to activate or deactivate call

divert (optional).

5- Relay contacts

6- Telephone line connection (LN,LN)

7- Line output to telephones (TF,TF)

8- Power input

9- Panel/telephone audio adjustments

10- Audio adjustments in divert

11- Door control connection (or panel bus) 4+N

12- Door control connection (or panel bus) ADS

ANTES DE CONECTAR A LA ALIMENTACIÓN.

BEFORE CONNECTION TO THE SUPPLY.

- VEASE LAS INSTRUCCIONES DE INSTALACIÓN

- SEE INSTALLATION INSTRUCTIONS

INTERFACE TELEFONICO ADS

MADE IN SPAIN

ADS TELEPHONIC INTERFACE

LNNONCD

-DC LN TFTFUSE PRG PWR

FORWARD

REF. 1088

18 V, 400 mA

1 V, 300 mA

1 V, 700 mA, 50-60 Hz

INPUT

L-AUDIO ADJUST

12 3 4 5 6

810

REF. 4300

4+N TELEPHONIC INTERFACE

INTERFACE TELEFONICO 4+N

PRG

MADE IN SPAIN

NC CUSE PWR D D NO

INPUT

1 3 4 6

TFLNLN TF

AUDIO ADJUST

FORWARD

1 V, 700 mA, 50-60 Hz

1 V, 400 mA

ANTES DE CONECTAR A LA ALIMENTACIÓN.

BEFORE CONNECTION TO THE SUPPLY.

- VEASE LAS INSTRUCCIONES DE INSTALACIÓN

- SEE INSTALLATION INSTRUCTIONS

12 3 4 5 6

81011

Telephone Interface 4+N Ref. 4300 Telephone Interface ADS Ref. 1088

INTERFACE TELEFÓNICO

CONFIGURATION

The Telephone Interface enables the house telephones to receive and answer calls from the automatic

porter and it is also possible to divert them out by means of the telephone line.

Here are some examples in block diagram format:

TYPICAL SETUP

All the telephones also carry out electronic door control functions.

MIXED SETUP

In this example, some telephones perform door control operations and others do not.

TELEPHONE ONLY

ANTES DE CONECTAR A LA ALIMENTACIÓN.

BEFORE CONNECTION TO THE SUPPLY.

- VEASE LAS INSTRUCCIONES DE INSTALACIÓN

- SEE INSTALLATION INSTRUCTIONS

INTERFACE TELEFONICO ADS

MADE IN SPAIN

ADS TELEPHONIC INTERFACE

LNNONCD

-DC LN TFTFUSE PRG PWR

FORWARD

18 V, 400 mA

1 V, 300 mA

1 V, 700 mA, 50-60 Hz

INPUT

AUDIO ADJUST

TELEPHONE / DOOR CONTROL

RTB

ANTES DE CONECTAR A LA ALIMENTACIÓN.

BEFORE CONNECTION TO THE SUPPLY.

- VEASE LAS INSTRUCCIONES DE INSTALACIÓN

- SEE INSTALLATION INSTRUCTIONS

INTERFACE TELEFONICO ADS

MADE IN SPAIN

ADS TELEPHONIC INTERFACE

LNNONCD

-DC LN TFTFUSE PRG PWR

FORWARD

18 V, 400 mA

1 V, 300 mA

1 V, 700 mA, 50-60 Hz

INPUT

AUDIO ADJUST

TELEPHONE LINE

RTB

TELEPHONE LINE

INTERFACE TELEFÓNICO

INTERFACE TELEFÓNIC

PABX

SETUP WITH TELEPHONE SWITCHBOARD, CONNECTION ON LINE

SETUP WITH TELEPHONE SWITCHBOARD, CONNECTION IN EXTENSIONS

Telephone Interface intercepts the telephone line at an outbound switchboard extension.

Telephone Interface intercepts the line before it enters the switchboard and so all the extensions depending

on the inbound line will receive the calls from the outdoor panel.

• The Interface intercepts 1 of the 3 telephone lines (L1, L2, L3)

coming into the switchboard.

• The extensions set up to receive outside calls from Line 1 (e.g:

Ext. 2 and Ext. 4), can also act as a door control .

ANTES DE CONECTAR A LA ALIMENTACIÓN.

BEFORE CONNECTION TO THE SUPPLY.

- VEASE LAS INSTRUCCIONES DE INSTALACIÓN

- SEE INSTALLATION INSTRUCTIONS

INTERFACE TELEFONICO ADS

MADE IN SPAIN

ADS TELEPHONIC INTERFACE

LNNONCD

-DC LN TFTFUSE PRG PWR

FORWARD

18 V, 400 mA

1 V, 300 mA

1 V, 700 mA, 50-60 Hz

INPUT

AUDIO ADJUST

TELEPHONE LINES

Ext. 1

Ext. 2

Ext. 3 Ext. 4

Ext. 5

Ext. 6

EXAMPLE:

TELEPHONE ONLY

TELEPHONE / DOOR

CONTROL

TELEPHONE ONLY

TELEPHONE /

DOOR CONTROL

TELEPHONE ONLY

RTB

• Interface intercepts an outbound switchboard extension Ext. 2.

• Telephones depending on this extension will perform door control

functions.

ANTES DE CONECTAR A LA ALIMENTACIÓN.

BEFORE CONNECTION TO THE SUPPLY.

- VEASE LAS INSTRUCCIONES DE INSTALACIÓN

- SEE INSTALLATION INSTRUCTIONS

INTERFACE TELEFONICO ADS

MADE IN SPAIN

ADS TELEPHONIC INTERFACE

LNNONCD

-DC LN TFTFUSE PRG PWR

FORWARD

18 V, 400 mA

1 V, 300 mA

1 V, 700 mA, 50-60 Hz

INPUT

AUDIO ADJUST

TELEPHONE LINE

PABX

Ext. 1

Ext. 2

TELEPHONE / DOOR CONTROL

RTB

Ext. 3

Ext. 4

Ext. 5

√√

√

IMPORTANT NOTES:

• The Telephone Interface will only accept tone dialling .

• For use in ISDN or ADSL lines the necessary filters or adaptors must be installed.

EXAMPLE:

INTERFACE TELEFÓNICO

NOTE:

• You can place the Telephone Interface at any point of the conventional installation connecting cables 1, 2, 3, 6 and 4 (call )

INSTALLATION DIAGRAMS - CONVENTIONAL SYSTEM (4+n)

APARTMENT

GENERAL INSTALLATION

RTB

REF. 8980

12 Vac - 1A

PRIM

SEC. 12Vac

Vac

6321

REF. 4300

4+N TELEPHONIC INTERFACE

INTERFACE TELEFONICO 4+N

PRG

MADE IN SPAIN

NC CUSE PWR D D NO

INPUT

1 3 4 6

TFLNLN TF

AUDIO ADJUST

FORWARD

1 V, 700 mA, 50-60 Hz

1 V, 400 mA

ANTES DE CONECTAR A LA ALIMENTACIÓN.

BEFORE CONNECTION TO THE SUPPLY.

- VEASE LAS INSTRUCCIONES DE INSTALACIÓN

- SEE INSTALLATION INSTRUCTIONS

6321

MADE IN SPAIN

+ CALL WIRES

DIVERT SWITCH(OPTIONAL)

GENERAL INSTALLATION

INTERFACE TELEFÓNICO

INTERFACE TELEFÓNIC

RTB

PRIM

SEC. 12Vac

Vac

ANTES DE CONECTAR A LA ALIMENTACIÓN.

BEFORE CONNECTION TO THE SUPPLY.

- VEASE LAS INSTRUCCIONES DE INSTALACIÓN

- SEE INSTALLATION INSTRUCTIONS

INTERFACE TELEFONICO ADS

MADE IN SPAIN

ADS TELEPHONIC INTERFACE

LNNONCD

-DC LN TFTFUSE PRG PWR

FORWARD

REF. 1088

18 V, 400 mA

1 V, 300 mA

1 V, 700 mA, 50-60 Hz

INPUT

L-AUDIO ADJUST

-L

REF. 8980

12 Vac - 1A

MADE IN SPAIN

INSTALLATION DIAGRAM - ADS System

NOTE:

• The Telephone Interface can be placed at any point of the ADS installation, intercepting the 3 cables ( +, - , L )

APARTMENT

GENERAL INSTALLATION

DIVERT SWITCH (OPTIONAL)

GENERAL INSTALLATION

INTERFACE TELEFÓNICO

PROGRAMMING INSTALLATION PARAMETERS

Installation Parameters are configured when the Interface is installed and are not usually modified

afterwards. The following table shows some of these parameters.

√√

√

NOTES:

• The Telephone Interface must be connected to the telephone line for programming.

• The Ring Pattern may be changed to make it easier to distinguish when a door control call is received

and when it is a normal telephone call.

System

House number (ADS Number)

Number the panel identifies Interface with.

Digit Parameter Value

ADS

4+N

BOTH

1-199

Open door timing

Time door release mechanism is activated. 1-200

Relay timing

Time relay is activated.

Ring pattern(Call type)

Number of tones heard at telephone when call is received.

1-60

1-10

The system can be programmed from any telephone connected to the Interface. To do so:

789

*0#

1- Unhook the telephone handset you are going to program the Interface from.

Dialling tone sounds.

2- Press the ‘#’ key.

Now the PRG LED lights up and the dialling tone stops.

5- Press ‘#’ again to exit programming mode.

Or wait 30 seconds without pressing any keys.

4- Use the keypad to input the new value.

The green LED lights up every time you press a key.

3- On the telephone, press the digit corresponding to the parameter you want to program.

Parameter Value entered Equivalent time

Open door timing

Relay timing

Ring tone

N (1....200)

N (1......60)

N (1.....10)

t= N / 4 sec.

t= N / 2 sec.

t=N sec.

Default

4 sec.

2.5 sec.

1 sec.

When entering the Open Door Timing, the Relay Timing or Ring Tone, we take the following table into

account:

INTERFACE TELEFÓNICO

INTERFACE TELEFÓNIC

PROGRAMMING EXAMPLE 2

Let’s see how to program the ADS number:

This only needs to be done if you have Telephone Interface Ref. 1088.

- Proceed with the first 2 steps as in the example above. In step 3, key in 0, (digit corresponding to the

ADS Number parameter as appears in the table on the previous page).

The maximum door open timing we can set corresponds to the maximum N:

To program the Open Door Timing or Ring Pattern, proceed in the same way and assign Nthe

value needed to obtain the desired timing.

5- Press ‘#’ again to exit programming mode or wait 30 seconds without pressing any keys.

789

*0#

If you want an opening time of 5 seconds, select an N value, so that:

- Step 4, enter the parameter value (ADS telephone nº between 1 and 199)

You must enter the same number as the FERMAX electronic door control system .

- Press ‘#’ to exit programming mode.

You also exit programming mode after 30 seconds without pressing any key.

PROGRAMMING EXAMPLE 1

To program the Relay Timing; take the following steps:

1- Unhook the telephone handset you are going to program the Interface from.

2- Press the ‘#’ key. The PRG LED will light up and the dialling tone stops.

3- Enter the digit corresponding to the parameter you wish to program.

In this example it would be 2

4- Key in the new parameter value. To introduce this value, consult the table on the

previous page, where:

Here are a couple of practical examples of how to program the Interface installation parameters:

t = 5 seconds N = t*4 N = 20

N = 200 t = N / 4 50 seconds

INTERFACE TELEFÓNICO

The User Parameters are those that may be modified most often in line with the user’s needs. The

following table shows what these are:

PROGRAMMING USER PARAMETERS

PROGRAMMING EXAMPLE

To program the divert Telephone, proceed as follows:

1- Unhook the telephone handset you want to program the Interface from.

2- Press the ‘#’ key. The PRG LED will light up and the dialling tone stops.

3- Key in the digit corresponding to the parameter you wish to program.

In this example it would be 3

4- Key in the new parameter value, in this case the telephone number

you want to divert the door call to. For example: 612 345678

5- Press ‘#’ again to exit programming mode or wait 30 seconds without pressing any keys.

789

*0#

The telephone number to which the call will be diverted has now been programmed (in this case a mobile

phone). Remember that the maximum length of the divert number is 16 digits.

System

Divert Telephone.

Telephone number calls will be diverted to.

Digit Parameter Value

8BOTH

TELEPHONE

NUMBER

Call divert activation.

Lets you activate the divert from the telephone. NO

Call divert deactivation.

Lets you deactivate the divert from the telephone. NO

BOTH

√√

√

NOTES:

• Maximum length of the divert telephone is 16 figures.

• It is not necessary to enter any value for divert activation or deactivation.

• It is possible to activate or deactivate the divert by means of an additional switch (see

installation diagrams).

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Fermax Apparecchiature di registrazione

Fermax

Fermax DUOX PLUS Guida utente

Fermax

Fermax 4545 Manuale di istruzioni

Manuali Apparecchiature di registrazione popolari di altre marche

KV2 Audio

KV2 Audio 500 Series Manuale utente

Robotics Technologies

Robotics Technologies microBus-Cam II Manuale utente

Seca

Seca 460 Manuale utente

Cognex

Cognex MVS-8000 Series Manuale utente

Mect

Mect MPNC006 Series Manuale utente

Bad Caf

Bad Caf THE LEASH Manuale utente

Strymon

Strymon NIGHTSKY Manuale utente

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuale utente

Tews Technologies

Tews Technologies TPMC465 Manuale utente

Honeywell

Honeywell Excel 50 Manuale utente

SeaLevel

SeaLevel COMM+8.LPCI Manuale utente

Arturia

Arturia AUDIOFUSE STUDIO Manuale utente

Rukra

Rukra RK-1240 Manuale utente

Samson

Samson SCOM Manuale utente

Dynacord

Dynacord DPS260 Manuale utente

Nice

Nice Core Manuale utente

Pyle Pro

Pyle Pro PSS8 Manuale utente

RF-System

RF-System TinyGate Manuale per l'uso e la cura