FERREX S019 Manuale utente
PRODUCED IN CHINA FOR:
GB IE
Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly. In
the event of product failure within its intended use over the course of the
first 3 years after date of purchase, we will remedy the problem as quickly
as possible once it has been brought to our attention. In the unlikely event
of such an occurrence, or if you require any information about the product,
please contact us via our helpline support services, details of which are to be
found both in this manual and on the product itself.
ALDI STORES LTD. PO BOX 26, ATHERSTONE
WARWICKSHIRE, CV9 2SH
ALDI STORES (IRELAND) LTD.
PO BOX 726, NAAS, CO. KILDARE
Visit us at www.aldi.com
3
YEAR
WARRANTY
User Manual
3.6 V LITHIUM-ION
CORDLESS SCREWDRIVER
Original User Manual
2
1
2
4
5
3
Scope of delivery/device components
1
Cordless screwdriver
2
Charger
3
Bit holder
4
Bit set
5
Storage box
User manual and warranty card (not depicted)
Scope of delivery/device components
3
Table of content
Overview.................................................................................................. 2
Scope of delivery/device components....................................................3
General information................................................................................ 5
Reading and storing the operating manual...............................................5
Proper use........................................................................................................6
Explanation of symbols........................................................................... 6
Safety........................................................................................................7
Before first use....................................................................................... 20
Operation................................................................................................ 21
Charge Battery...............................................................................................22
Displaying the charge state.........................................................................24
Inserting bits..................................................................................................24
Turning the device on and off.....................................................................26
Left/right rotation switch and switch lock................................................. 27
Setting the torque.........................................................................................28
Using as a cordless screwdriver/straight screwdriver.............................29
Useful work tips............................................................................................ 30
Screwing........................................................................................................ 30
Using the LED lamp........................................................................................31
Cleaning.................................................................................................. 31
Maintenance........................................................................................... 31
Inspection...............................................................................................32
Storage................................................................................................... 32
Troubleshooting.....................................................................................33
Technical data........................................................................................ 33
Declaration of conformity......................................................................36
Disposal.................................................................................................. 38
Table of content
4
General information
Reading and storing the operating manual
This user manual is part of the 3.6 V lithium-ion cordless
screwdriver (hereinafter also called "device"). It
contains important information on how to set up and
use the device.
Before using the device, read the operating manual carefully, in
particular the safety instructions. Failure to follow this operating
manual may lead to severe injuries or product damage.
This user manual is based on the standards and regulations that
are valid within the European Union. Outside the EU, please also
note the country-specific directives and laws.
Keep this operating manual for future reference. If you pass this
device on to a third party, you must also supply this operating
manual.
Residual risks
Despite proper use, hidden residual risks cannot be completely
excluded.
Depending on the type of device, the following risks may occur:
-Health risks which may result from vibration emissions if the
device is used for a long period of time or is not properly used
or maintained.
-Injuries and material damage, which are caused by the
moving blade or breaking tool heads.
- Health risks may result from working with toxic or hazardous
materials (eg. asbestos) or if appropriate personal protection,
due to hazardous material use, is not applied.
General information
5
Proper use
The device is intended for inserting and
removing screws in/from wood and wood-like
materials.
This device is intended for private use only and
is not suitable for commercial use. Use the
device only as described in this operating
manual. Any other use is improper and may
lead to product damage or even personal
injury. This device is not a toy.
The manufacturer or retailer assume no
liability for damage caused by improper or
incorrect use.
Explanation of symbols
The following symbols and signal words are used in this user
manual, on the device or on the packaging.
This symbol provides you with useful additional
information on handling and use.
Declaration of conformity (see chapter
“Declaration of conformity”): Products marked
with this symbol meet all the applicable
Community regulations of the European Economic
Area.
General information
6
The new UKCA (UK Conformity Assessed) marking
declares that the product conforms to all
applicable U.K. legislative requirements and that
appropriate conformity assessment procedures
have been successfully completed.
ID XXXXXXXXX
The “GS” (Tested Safety) certification mark confirms
the device’s compliance with the German Product
Safety Act (ProdSG for short).
This symbol identifies devices that belong to the
protection class II.
Read the operating manual.
The device is designed for interior use only.
This symbol describes the power adaptor’s
polarity: negative (-), positive (+).
DC voltage
Safety
The following signal words are used in this
operating manual.
Explanation of symbols
7
WARNING!
This signal symbol/word denotes a hazard
with an average risk level that could lead to
death or severe injury if it is not avoided.
CAUTION!
This signal symbol/word denotes a hazard
with a low risk level that could lead to mild or
moderate injury if it is not avoided.
NOTE!
This signal word provides a warning about
potential material damage.
General safety notes for power tools
WARNING!
Read all safety notes, instructions,
illustrations and technical data provided
with this power tool. Failure to follow the
Safety
8
instructions below may result in electric
shock, fire and/or serious injury.
Keep all safety notes and instructions for
future reference.
The term "power tool" used in the safety
notes refers to both mains-operated power
tools (with power cord) and battery-powered
power tools (without power cord).
Workplace safety
-Keep your work area tidy and well lit.
Clutter or unlit work areas can lead to
accidents.
-Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power
tools create sparks which may ignite the
dust or fumes.
-Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose control.
Safety
9
Electrical safety
-Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools.
Unmodified
plugs and matching outlets will reduce
risk of electric shock.
-Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
-Do not expose power tools to rain or
wet conditions.
Water entering a power
tool will increase the risk of electric shock.
Personal safety
-Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power tool
while you are tired or under the
influence of drugs, alcohol or
medication.
A moment of inattention
Safety
10
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali FERREX Cacciavite elettrico
