Contents
Designated use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V
Target group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VI
Important user instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VI
Danger categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VI
Notes on this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VIII
Product-specific terms and abbreviations . . . . . . . . . . . . . . . . . . . . . . . . IX
1. System summary
1.1 System structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
1.2 Connecting and display elements on the PROFIBUS module . . 1-4
1.3 Basic structure for operation on the PROFIBUS-DP. . . . . . . . . . 1-5
1.4 Operating modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
2. Fitting
2.1 Fitting and removing the field bus module. . . . . . . . . . . . . . . . . . 2-4
3. Installation
3.1 General instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
3.2 Connecting the PROFIBUS-DP interface . . . . . . . . . . . . . . . . . . 3-4
3.3 Connecting the SPC200 via a branch line. . . . . . . . . . . . . . . . . . 3-9
3.4 Optical-fibre waveguide connection . . . . . . . . . . . . . . . . . . . . . . 3-10
4. Commissioning
4.1 Procedure for commissioning. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
4.1.1 Additional instructions on commissioning with WinPISA. . . . . . . 4-4
4.2 Preparations for commissioning the field bus . . . . . . . . . . . . . . . 4-9
4.2.1 Setting the PROFIBUS address with WinPISA . . . . . . . . . . . . . 4-10
4.2.2 Setting the PROFIBUS address with the control panel. . . . . . . 4-12
4.3 Configuring the SPC200 as a PROFIBUS slave. . . . . . . . . . . . 4-14
4.3.1 Configuration with COM PROFIBUS . . . . . . . . . . . . . . . . . . . . . 4-20
4.3.2 Configuration with STEP 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25
4.3.3 Configuration with DP masters of other manufacturers. . . . . . . 4-30
SPC200-COM-PDP 9904NH III
