FGD FlameSpec IR3 H2 HD Manuale utente

FlameSpec IR3 H2 HD User Manual

Doc. No. F140V0020.07

4222 E. La Palma Ave, Anaheim, CA 92807 USA T: (+1) 714-671-8500

www.fg-detection.com · suppo[email protected]om

FlameSpec IR3-H2-HD

Information

FlameSpec-IR3-H2-HD Triple IR HD Flame Detector User Guide, October 2022

The owner or authorized user of a valid copy of this manual may reproduce this publication for the

purpose of learning to use the specified equipment. No part of this publication may be reproduced or

transmitted for commercial purposes, such as selling copies of this publication or for providing paid for

support services.

The Fire & Gas Detection Technologies logo is a trademark of Fire & Gas Detection Technologies Inc.,

registered in the U.S. and other countries.

Every effort has been made to ensure that the information in this manual is accurate. However, Fire &

Gas Detection Technologies Inc. is not responsible for any inaccuracy or omission in this document. The

information in this document is subject to change without notice.

Legal Notice

Hardware, software or documentation is forbidden to reproduced, transmitted, transcribed, stored in a

retrieval system or translated into any language or computer language, in any form or by any means.

While great efforts have been made to assure the accuracy and clarity of this document, FIRE & GAS

DETECTION TECHNOLOGIES INC. assumes no liability resulting from any omissions in this document, or

from misuse of the information obtained herein. The information in this document has been carefully

checked and is believed to be entirely reliable with all of the necessary information included.

FIRE & GAS DETECTION TECHNOLOGIES INC. reserves the right to make changes to any products

described herein to improve reliability, function, or design, and reserves the right to revise this

document and make changes from time to time in content hereof with no obligation to notify any

persons of revisions or changes. FIRE & GAS DETECTION TECHNOLOGIES INC does not assume any

liability arising out of the application or any use of any product or circuit described herein; neither does

it convey license under its patent rights or the rights of others.

 
FlameSpec IR3 H2 HD User Manual 
Doc. No. F140V0020.07 
 
For more information & technical support: (+1) 714-671-8500 · support@fg-detection.com iii 
Table of Contents 
1. Introduction.................................................................................................................... 1 
 Key Features........................................................................................................................1
 Model Number Description..................................................................................................2
 Internal tests .......................................................................................................................2
 Product Overview ................................................................................................................3
 Accessories..........................................................................................................................4
2
 Installation ..................................................................................................................... 7 
 General Considerations........................................................................................................7
 Preparations for Installation...............................................................................................10 
 Required Tools...................................................................................................................10 
 Certification Instructions....................................................................................................10 
 Mounting the Tilt Mount....................................................................................................12 
 Mounting the detector.......................................................................................................13 
 Electrical Wiring.................................................................................................................14 
 Current Output (0-20mA) Wiring ........................................................................................16 
 4 Wire Relay Connection ....................................................................................................18 
 RS-485 Communication Network........................................................................................18 
 Cabling Recommendations.................................................................................................19 
 Earth/Ground Regime........................................................................................................20 
3Configuration options ................................................................................................... 20 
 Sensitivity..........................................................................................................................22 
 Ultra-Fast Detection...........................................................................................................22 
 Alarm Delay.......................................................................................................................22 
 Alarm Latch .......................................................................................................................22 
 Enable Pre-Alarm 0-20mA ..................................................................................................23 
 Enable dirty window warning 0-20mA ................................................................................23 
 Auxiliary Relay...................................................................................................................23 

 
FlameSpec IR3 H2 HD User Manual 
Doc. No. F140V0020.07 
 
For more information & technical support: (+1) 714-671-8500 · support@fg-detection.com iv 
 Window Heater .................................................................................................................23 
 Video Settings....................................................................................................................23 
 Modbus Address................................................................................................................23 
 Manual BIT –Alarm Output Test (Full loop test)..................................................................24 
4Operation ..................................................................................................................... 25 
 Output Signals ...................................................................................................................25 
 Testing...............................................................................................................................26 
 Flame Simulator.................................................................................................................26 
5Maintenance ................................................................................................................ 27 
 Cleaning Procedure............................................................................................................27 
6Troubleshooting............................................................................................................ 28 
7Servicing ....................................................................................................................... 29 
8FGD Communicator Software ........................................................................................ 29 
9Specifications................................................................................................................ 30 
 Fire Detection....................................................................................................................30 
 Video Functionality............................................................................................................30 
 Electrical Specifications......................................................................................................30 
 Outputs .............................................................................................................................31 
 Mechanical Specifications ..................................................................................................31 
 Environmental Specifications .............................................................................................31 
 Product Labeling................................................................................................................32 
 Approvals ..........................................................................................................................35 
 Electromagnetic Compatibility ...........................................................................................35 
10 Performance.............................................................................................................. 36 
 FLS-IR3-H2-HD-ASX1, FLS-IR3-H2-HD-ASX2 (Standard Model) ..............................................36 
 False Alarm Immunity ........................................................................................................37 
11 Ordering Information................................................................................................. 38 
12 Warranty................................................................................................................... 39 
Appendix A.......................................................................................................................... 40 

 
FlameSpec IR3 H2 HD User Manual 
Doc. No. F140V0020.07 
 
For more information & technical support: (+1) 714-671-8500 · support@fg-detection.com v
List of Figures 
Figure 1 - Front view of the FLS-IR3-H2-HD............................................................................................................... 3 
Figure 2 - Rear view of the FLS-IR3-H2-HD............................................................................................................... 3 
Figure 3 - Tilt mount.......................................................................................................................................................... 4 
Figure 4 - Weather Cover................................................................................................................................................. 4 
Figure 5 - Pole Mount ....................................................................................................................................................... 5 
Figure 6 - Air Shield........................................................................................................................................................... 5 
Figure 7 - Flame Simulator Kit........................................................................................................................................6 
Figure 8 - FLS-FSIM-IR3-H2 Flame Simulator Front View ....................................................................................6 
Figure 9 - Horizontal Field of View ................................................................................................................................8 
Figure 10 - Vertical Field of View.................................................................................................................................... 8 
Figure 11: Tilt Mount Base - Plate View........................................................................................................................12 
Figure 12: Tilt mount base –Side View........................................................................................................................12 
Figure 13 - Detector on Tilt Mount –Side View..........................................................................................................13 
Figure 14 –Terminal View ..............................................................................................................................................14 
Figure 15 –Source 4-Wire Scheme .............................................................................................................................16 
Figure 16 –Sink 4-Wire Scheme..................................................................................................................................16 
Figure 17 –Source 3-Wire Scheme..............................................................................................................................17 
Figure 18 –Sink 3-Wire Scheme.................................................................................................................................. 17 
Figure 19 - 4 Wire Relay Connection............................................................................................................................18 
Figure 20: RS-485 Networking ....................................................................................................................................19 
 
List of Tables 
Table 1: Terminal connections........................................................................................................................................15 
Table 2: Detector Configuration Options......................................................................................................................21 
Table 3: Sensitivity levels ..............................................................................................................................................22 
Table 4: Output Signals..................................................................................................................................................25 

FlameSpec IR3 H2 HD User Manual

F140V0020.07

For more information & technical support: (+1) 714-671-8500 · support@fg-detection.com 1

1. Introduction

The FlameSpec-IR3-H2-HD flame detector will detect hydrogen and other “energy transition” fires quickly

allowing actions to be initiated to minimize the extend of the fire. The detector addresses slow growing fires as

well as fast eruptions of fire using improved IR3 technology. The detector operates in all weather and light

conditions.

As standard, a near infrared camera provides personnel the ability to see normally invisible fires like, hydrogen

and methanol.

The near IR camera allows rescue teams to be aware of the exact situation before entering the hazardous area.

The detector automatically records video of fire event (1 minute pre- and up to 3 minutes post-alarm initiation).

These features, along with the built-in event logger, provide an additional means to study the cause and

development of fire events.

As an option, the near IR camera can be changed to a color HD camera.

Key Features

•High immunity to false alarm

•Ultra-fast detection mode detection within 40 milliseconds for Hydrogen fireballs or explosions

•Detection of “energy transition” flames, like hydrogen, methane, syngas, and methanol

•High sensitivity –up to 100 ft. (30m)

•Near IR HD video output with automatic HD video recording of fire events

•Option: Improved speed of response for standard fires - (0.5s) for enclosed space protection, like spray

paint booths or printing presses.

•Data/Event logger –alarms, faults and other relevant events are logged to non-volatile memory

•Ethernet communication –in addition to the standard methods, such as 4-20mA and Modbus

•Built-in-Test (BIT) –Automatic and manual internal self-test of window cleanliness and the overall

operation of the detector

•Window heater to avoid condensation and icing

•Tilt mounting bracket for accurate detector positioning

FlameSpec IR3 H2 HD User Manual

F140V0020.07

For more information & technical support: (+1) 714-671-8500 · support@fg-detection.com 2

Model Number Description

Model No are defined as follows:

FLS-IR3-H2-HD - A S X X

Standard Near IR Camera

Like model 1 with RGB Camera

Designed for, but not limited to, automotive spray paint applications

where compliance with 0.5 s response (per NFPA 33) is needed. with

Near IR Camera. Generally used for enclosed spare protection.

M25

¾” NPT

1.2.1 Enhanced performance options

Option 5: Design for, but not limited to, automotive spray paint applications where compliance with 0.5 s

response (per NFPA 33) is needed

Internal tests

During normal operation, the flame detector performs self-tests of its optics, electronics and software. These

include a periodic BIT (Built-In-Test) in which the sensors and window cleanliness are tested. Any detected

fault is indicated as shown in Table 4 (in section 4.1). During “Dirty Window” fault the detection sensitivity is

significantly reduced, while “Fault” refers to critical faults which totally prevent flame detection.

FlameSpec IR3 H2 HD User Manual

F140V0020.07

For more information & technical support: (+1) 714-671-8500 · support@fg-detection.com 3

Product Overview

FIGURE 1-FRONT VIEW OF THE FLS-IR3-H2-HD

FIGURE 2-REAR VIEW OF THE FLS-IR3-H2-HD

FlameSpec IR3 H2 HD User Manual

F140V0020.07

For more information & technical support: (+1) 714-671-8500 · support@fg-detection.com 4

Accessories

1.5.1 Mounting Bracket

The detector should be mounted using the

stainless-steel tilt mount part number FLS-TMO-

S02. This allows the detector to be securely

attached to a wall, pole or other solid surface

using appropriate fixings. See section2.5 and 2.6

for further details.

FIGURE 3-TILT MOUNT

1.5.2 Weather Cover

The weather cover P/N FLS-WCO-S02 protect the

detector from extreme weather conditions such

heat, rain and snow

FIGURE 4-WEATHER COVER

FlameSpec IR3 H2 HD User Manual

F140V0020.07

For more information & technical support: (+1) 714-671-8500 · support@fg-detection.com 5

1.5.3 Pole mount

The pole mount enables the detectors to be

installed with its tilt mount brackets. The pole

mount kit we supply are suitable for 2-inch or 3-

inch poles. Part number FLS-PMA-S23.

FIGURE 5-POLE MOUNT

1.5.4 Air shield

The air shield P/N FLS-ASD-S02 allows installation of

flame detectors in harsh weather conditions where

they may be exposed to dust, sand, and other

particulate matter. The connection point can be

mounted in the 3, 9 or 12 o’clock locations.

•Air pressure source: Clean, dry, and oil-free air

•Pressure: 2-3 bar /30-45 psi

•Fitting: 7/16”—20UNF-2A

•Operation temperature: -55°C to +85°C / -67°F to

+185°F

FIGURE 6-AIR SHIELD

Indice

Altri manuali FGD Sensore di sicurezza

FGD

FGD FlameSpec Manuale utente

FGD

FGD FlameSpec UV-IR-HD Manuale utente

FGD

FGD FlameSpec UV-IR Manuale utente

FGD

FGD FlameSpec IR3-H2-HD Manuale utente

FGD

FGD FlameSpec IR3 Series Manuale utente

FGD

FGD FlameSpec IR3-HD Manuale utente

Manuali Sensore di sicurezza popolari di altre marche

THORLABS

THORLABS PDA10JT Manuale utente

Waeco

Waeco UV-DETECT Manuale utente

Intermatic

Intermatic IOS-DSIMF Manuale utente

urmet domus

urmet domus 1083 Manuale utente

Siemens

Siemens AZL66 Series Manuale utente

BTI

BTI Profiline Multi Finder Manuale utente

Challenger

Challenger SL01 Manuale utente

DMP Electronics

DMP Electronics 1122INT Manuale utente

Rielta

Rielta Ladoga MK-RK Manuale utente

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuale utente

Bosch

Bosch DS835 Manuale utente

DBI SALA

DBI SALA EZ Stop Manuale dell'operatore

Lamptime

Lamptime ST05C Manuale utente

Ubiquiti

Ubiquiti MFI-MSC Manuale utente

Subsite

Subsite 910R Istruzioni per l'installazione

Satel

Satel OPAL Pro Manuale utente

Aleph

Aleph XC-1XTEU Manuale utente

Pima

Pima LARIS QUAD Manuale utente