Positioning unit
Date: 08/02/21 File: Servo3M_M12_ing.doc page 2/8
Manual purpose
This manual has been designed by the manufacturer to provide the necessary information regarding the
SERVO unit to those who are authorized to carry out safely its installation, maintenance, removal and
disposal. All the necessary information for the buyers and planners can be found in the sales documentation.
In addition to adopting good technical construction methods, the information should be read carefully and
strictly applied. Inobservance of this information could cause risks for the health and safety of people and
equipment damage. This information, provided by the manufacturer in the original language (Italian) is also
available in other languages to satisfy legislative and/or commercial needs. A responsible person must keep
this manual in an ideal place in good conditions so that it is always available for consultation. In case this
manual is lost or deteriorates, a replacement should be requested directly from the manufacturer indicating
the product part number. This manual reflects the features of the instrument at the time of input on the
market: however the manufacturer reserves the right to make changes, add or improve the manual without
giving any reason to hold the present manual inadequate.
Identification of the equipment
The identification plate is applied on the instrument.
To find out the identification code of the instrument, consult the sales documentation.
Environmental conditions
Temperature setting: min 0°C – max + 50°C.
It is forbidden to use the instrument other than its specific use and in potentially explosive conditions or where
anti-explosive elements are necessary.
Storage
Here below are some references to be followed for the storage of the device.
Avoid environments with excessive humidity and those exposed to harsh weather (avoid open areas). Avoid
putting the instrument directly on the ground. Store the instrument in its original packing.
Conformity declaration and EC marking
The instrument answers to the following Communitarian Directives:
2014/30/EU Electromagnetic compatibility, 2011/65/EU RoHS
Maintenance
The instrument does not need a particular maintenance except cleaning to be done only with a soft cloth
dampened with ethyl alcohol or water. Do not use hydrocarbon solvents (petrol, thinners, etc.): the using of
these products could affect the proper functioning of the instrument.
Repairs should be done only and exclusively at the FIAMA technical assistance centre.
Assistance request procedure
For any kind of technical assistance request, contact the sales department of the Manufacturer directly
indicating the information given on the identification plate, the number of hours used and the type of defect.
Manufacturer’s responsibility
The manufacturer declines any responsibility in case of:
• Using the instrument contrary to the national safety and accident-prevention laws.
• Incorrect installation, inobservance or incorrectly followed procedures provided in the present manual.
• Defective electrical power supply.
• Modifications or tampering.
• Operations carried out by untrained or unqualified staff.
The safety of the instrument also depends on the strict observance of the procedures indicated in the
manual: always operate the instrument in its functioning capacity and carry out a careful routine maintenance.
• All phases of inspection and maintenance must be done by qualified staff.
• The configurations detailed in the manual are the only ones permitted.
• Do not try to use it anyway contrary to the indications provided.
• The instructions in this manual do not substitute but fulfill the obligations of the current legislation regarding
the safety laws.
