FIBARO FGBHFS-101 Manuale utente
CONTENTS
#1: Description and features 3
#2: Powering the accessory 4
#3: Pairing the accessory 5
#4: Physical installation 6
#5: Reset 7
#6: Functionalities 8
#7: Congurable parameters 9
#8: Specications 10
#9: Regulations 11
FIBARO FLOOD SENSOR
FGBHFS-101
OPERATING
MANUAL EN
v1.1
2
Important safety information
Read this manual before attempting to install the device!
Failure to observe recommendations included in this manual
may be dangerous or cause a violation of the law. The manufacturer,
Fibar Group S.A. will not be held responsible for any loss or damage
resulting from not following the instructions of operating manual.
!
HomeKit technology
Apple HomeKit technology provides an easy, secure way to control
HomeKit-enabled accessories using Siri on your iPhone, iPad, or iPod
touch.
After installing your FIBARO Flood Sensor, congure it from a
compatible app with just a few simple steps.
You can even create your own custom scenes to control your home
settings. For example, you can create a scene to automatically turn
o the lights, lock your doors, close the garage door, and set the
thermostat to the desired temperature in just one step.
To control this HomeKit-enabled accessory, iOS 9.3.5 or later is
recommended.
Controlling this HomeKit-enabled accessory automatically and
away from home requires an Apple TV with tvOS 9.2 or later or
an iPad with iOS 9.3 or later set up as a home hub.
i
3
DESCRIPTION AND FEATURES
Main features of FIBARO Flood Sensor:
• compatible with Apple HomeKit technology
• Bluetooth® low energy technology for wireless communication
• detects ooding
• detects tampering using accelerometer or when the casing is opened
• easy installation - simply put on a surface prone to ooding
• may be installed anywhere - sensor can be extended using
an external probe (not included)
• battery powered
• indicates state using LED diode and buzzer
FIBARO Flood Sensor is a HomeKit-enabled water sensor using
Bluetooth® low energy technology.
Along with detecting ooding, the accessory measures the ambient
temperature.
Tampering is detected whenever the accessory is moved or casing is
opened.
Built-in LED indicator and an acoustic alarm signal ooding and
tampering. The LED can be also used to identify the accessory.
The accessory is designed to be placed on the oor or mounted on a
wall (in this case sensor should be extended using an external probe).
The accessory is sink-proof, which means it drifts on the water surface
and keeps on sending alarm signal in case of substantial inundation
of water.
#1: Description and features
4
POWERING THE ACCESSORY
#2: Powering the accessory
1. Turn the cover counter-clockwise and open it.
2. Remove the battery blocker.
3. The accessory will glow red – it is ready to be paired.
4. Close the cover and turn it clockwise.
NOTE
If the accessory blinks
green after powering,
it is already paired and
has to be reset to pair
again.
i
5
PAIRING THE ACCESSORY
#3: Pairing the accessory
1. Open the Settings app on your iOS device.
2. Go to the Bluetooth® section, and turn the Bluetooth® on.
3. Place the accessory next to your iOS device.
4. Open a HomeKit compatible app of your choosing on your iOS
device.
5. Open pairing window in your HomeKit app to detect available
accessories.
6. Choose Flood Sensor you wish to pair.
7. You can identify it - Flood Sensor will triple blink blue 3 times.
8. Find HomeKit Setup Code on the last page of Quick Start Guide
included in the box that looks like this:
9. Start pairing with your HomeKit app.
10. Point your iOS device’s camera at the Setup Code to scan it or en-
ter the Setup Code manually.
11. If entered Setup Code is valid, the device will complete the setup
process.
12. Follow instructions displayed in the application.
XXX-XX-XXX
NOTE
Remember to keep
your HomeKit Setup
Code in safe place. You
may need it in case of
re-pairing.
i
6
PHYSICAL INSTALLATION
SENS 1
SENS 2
Extending Flood Sensor contacts with a wired probe:
NOTE
Mounting screws
shown in a diagram
are not included.
Choose a screw type
depending on the
building material it is
being attached to.
i
CAUTION
Sensor’s contacts are
dedicated to ood de-
tection only. Do not
connect external volt-
age!
!
#4: Physical installation
To install the Flood Sensor simply place it sensor on a surface prone
to ooding.
Three electrodes underneath the device should evenly touch the sur-
face.
If you want the accessory to be mounted on a wall or in a distance
from ooding source, sensor should be extended using an external
probe (not included).
We recommend using extension probes or cables designed to detect
water. Probes ends should be coated with non-corrosive metal.
Connection wires should not be longer than 3m and thicker than
18AWG (0.82mm2).
NOTE
Before completing
the installation it is
recommended to test
sensor’s operation by
placing the entire sen-
sor or sensor probe
onto water surface.
i
7
RESET
Resetting the Flood Sensor to factory defaults:
Reset procedure allows to restore the accessory back to its factory
settings including HomeKit pairing.
1. Open the cover.
2. Press the button 3 times then press and hold the button.
3. Wait for the LED indicator to glow yellow.
4. Release the button.
5. Click the button to conrm.
6. Accessory will glow red to conrm reset.
7. Delete the accessory from the app before pairing it again.
#5: Reset
Button
8
FUNCTIONALITIES
#6: Functionalities
Flooding detection:
The Flood Sensor alarms about ooding whenever water connects
sensor’s probes and reports it to your iOS device.
Until the ooding does not cease, the accessory constantly beeps and
blinks red signaling the alarm.
Tampering signalization is ignored during the alarm.
Tamper detection:
The Flood Sensor detects tampering when the accessory is moved
or casing is opened and reports it to your iOS device.
Tampering is indicated with an alternate blinking in red, blue and
white and one short beep.
Temperature measuring:
The Flood Sensor measures ambient temperature every 10 min-
utes. If the measured temperature diers from previously reported
by at least 1°C (1.8°F), accessory reports it to your iOS device.
Battery level measuring:
The Flood Sensor measures battery level every 24 hours and reports
it to your iOS device. Additionally, if battery level is below 15%, the
accessory will report low level battery status to your iOS device.
9
CONFIGURABLE PARAMETERS
#7: Congurable parameters
Congurable parameters will be available soon.
1. Tamper – sensor sensitivity
This parameter allows to set sensitivity of tamper detection.
The higher the value of this parameter, the higher the sensitivity.
If the installation surface is prone to vibrations, setting lower sensitiv-
ity is recommended.
Available settings: 0– tamper disabled
1– low sensitivity
2– medium sensitivity
3– high sensitivity
Default setting: 2 (medium sensitivity)
10
SPECIFICATIONS
Power supply:
Battery type:
EU directives compliance:
Radio protocol:
Radio frequency:
Range:
Operating temperature:
Measured temperature
range:
Temperature measuring
accuracy:
Dimensions (diameter x
height):
3.0V DC battery
CR123A
RoHS 2011/65/EU
RED 2014/53/EU
Bluetooth® low energy
2.4 GHz
up to 50m (free range)
(164 feet)
0-40°C (32-104°F)
0-40°C (32-104°F)
±0.5°C (±0.9°F)
72 x 28 mm (2.8 x 1.1 inch)
#8: Specications
CAUTION
Using batteries other
than specied may
result in explosion.
Dispose of properly,
observing environ-
mental protection
rules.
!
Altri manuali per FGBHFS-101
1
Indice
Altri manuali FIBARO Accessori
FIBARO
FIBARO FGBHDW-002 Manuale utente
FIBARO
FIBARO FGBHDW-002 Manuale utente
FIBARO
FIBARO FGMS-001 Manuale utente
FIBARO
FIBARO CO Sensor FGCD-001 Manuale utente
FIBARO
FIBARO FGFS-101 Manuale utente
FIBARO
FIBARO FGDW-002 Manuale utente
FIBARO
FIBARO FGMS-001 Manuale utente
FIBARO
FIBARO FGFS-101 Manuale utente
FIBARO
FIBARO FGFS-001 Manuale utente
FIBARO
FIBARO FGWPG-111 Manuale utente
FIBARO
FIBARO FGBHMS-001 Manuale utente
FIBARO
FIBARO FGBHFS-001 Manuale utente
FIBARO
FIBARO FGWPG-111 Manuale utente
FIBARO
FIBARO FGWPA-111 Manuale utente
FIBARO
FIBARO FGWPB-121 Manuale utente
FIBARO
FIBARO FGFS-101 Manuale utente
FIBARO
FIBARO FGBHCD-001 Manuale utente
FIBARO
FIBARO Walli Outlet E Manuale utente
FIBARO
FIBARO Flood Sensor Manuale utente
FIBARO
FIBARO Flood Sensor Manuale utente
