9
FUNCTION DESCRIPTION
一、Normal boot Process
A. Connect the power line, press the power switch, display
screen displays the trademark number.
B. Then the machine starts loading the data and the machine
displays the main interface when it is finished. Display
the current input and output volume and the status.
二、Main menu
1. Go to the main menu display screen after booting normally.
2. Select the output gain that needs to be adjusted, and adjust
the parameter by rotating knob.
3. Click on [+], [-] of the output gain of the target channel
on the screen to adjust the parameter.
4. Tap the other buttons on the main screen to jump to other
interfaces and features.
5. Volume parameter is as follows: Music volume; Mute,
-100dB~0dB, step distance 0.5dB.
三、Setting up Menus
1. Right click on the main screen, upper corner of the <Settings> key
switch to the settings menu.
2. Enter your password in the lock screen function and click <lock>
to lock screen operation. Re-enter your password and click <unlock>
to unlock it. Only the machine interface and the settings interface
can be operated when the screen is locked.
3. Select the specified segment of the IP address, rotate the knob to
adjust the IP address, adjust IP with the machine-linked computer
IP to the modification, click <ok> to complete the modification.
An IP address is used to connect a machine to a computer's network.
4. Click on the right language to switch between Chinese and English.
5. Click on <Return> to return to the next level of menu.
四、Program Storage Menu
1. Switch to the program storage interface by clicking the
<storage> key of the main screen.
2. Press the previous page, the next switch program save the
location interface, a total of 30 programs can be saved.
3. Select the program serial number you want to save and the
default program name preset1~preset30 appears on the
spin knob, and then click <save>.
4. You can save it online by desktop control software and
save it with your own name, but notice that the Chinese
character library is incomplete, so please avoid using
Chinese when naming.
五、Program Call Menu
1. Switch to the program call screen by clicking the <call> key of the
main screen.
2. Press the previous page and the next page toggles the program call
location interface.
3. Select the program serial number you want to call, and then click ok.
4. You can also make calls online through desktop control software.
Note: GUI can also be used to store、 call、 delete、 save to the computer、
import from the computer and other functions of these programs.
六、Debugging the interface menu
1. Click the <debug> key of the main screen to enter the
debugging interface.
2. In the debugging interface、there are input、 output mode、
input equalization、 frequency division network、 output
equalization、 delay、voltage limit、 voltage-temperature、
load and other function keys.
3. Click the button to enter the corresponding function sub-interface.
七、Output Menu
1. The output mode includes bi-channel、 bridge-mono、 and the
required set-point hits (Application) will take effect. Take Channel 1
and 2 as an example;
2. Dual Channel Mode: Channel 1 and Channel 2 both have output in
this mode.
3. Bridging-Mono: In this mode, channel 1 has output and channel 2
has no output.
