FieldServer FS-8700-39 EST3 ECP Manuale utente

APPLICABILITY & EFFECTIVITY

Effective for all systems manufactured after Septem er 2008

Driver Manual

(Supplement to the FieldServer Instruction Manual)

FS-8700-39 EST3 ECP

Driver Version:

1.0

Document Revision:

FS-8700-39 EST3 Driver Manual Ta le of Contents

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA We : www.fieldserver. om

Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver. om

TABLE OF CONTENTS

EST3 Description..............................................................................................................................3

Driver Scope of Supply.................................................................................................................... 3

2.1.

Supplied By FieldServer Te hnologies for this Driver .................................................................... 3

2.2.

Provided By the Supplier of 3

Party Equipment ...........................................................................3

2.2.1.

Hardware ................................................................................................................................. 3

2.2.2.

Required 3

Party Configuration............................................................................................. 3

Hardware Connections .................................................................................................................... 4

Configuring the FieldServer as a EST3 Client...............................................................................5

4.1.

Data Arrays..................................................................................................................................... 5

4.2.

Client Side Conne tion Des riptors................................................................................................ 6

4.3.

Client Side Node Des riptors ......................................................................................................... 6

4.4.

Client Side Map Des riptors ........................................................................................................... 7

4.4.1.

FieldServer Related Map De criptor Parameter ...................................................................7

4.4.2.

Driver Related Map De criptor Parameter ............................................................................7

4.4.3.

Map De criptor Example 1 ...................................................................................................... 9

4.4.4.

Map De criptor Example 2: ..................................................................................................... 9

Appendix A.

Driver Notes..................................................................................................................10

Appendix A.1.

PanelMasks: ................................................................................................................. 10

Appendix A.2.

Setting up Multiple Parameters .................................................................................... 10

Appendix A.3.

Priority:.......................................................................................................................... 10

Appendix A.4.

Report and Delta Servi e: ............................................................................................ 10

Appendix A.4.1.

Example Configuration u ing Delta Mode only...................................................... 11

Appendix A.5.

Optional Data Arrays .................................................................................................... 12

Appendix A.5.1.

Relay Confirmation State .......................................................................................12

Appendix A.5.2.

EST_Type _DA ..................................................................................................... 12

Appendix A.5.3.

EST_Type _Update............................................................................................... 12

Appendix A.5.4.

DA_Bit_Name ........................................................................................................ 12

Appendix A.5.5.

EST_Report_Type ................................................................................................. 13

Appendix A.6.

Obje t Types and Required Parameters ...................................................................... 14

Appendix A.7.

Set Date and Time To Panel ........................................................................................ 15

Appendix B.

Trou leshooting Tips .................................................................................................. 16

Appendix B.1.

Multiple Com Errors...................................................................................................... 16

Appendix C.

EST3 Data Format: ....................................................................................................... 17

Appendix C.1.

Input data format ..........................................................................................................17

Appendix C.2.

Output data format ....................................................................................................... 19

Appendix D.

EST3 ECP Connection Statistics:............................................................................... 20

Appendix E.

Driver Error Messages .................................................................................................... 21

FS-8700-39 EST3 Driver Manual Page 3 of 21

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA We : www.fieldserver. om

Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver. om

1. EST3 Description

The EST3 External Communi ations Proto ol (ECP) driver allows the FieldServer to transfer data to

and from EST devi es over RS-232 or RS-485 (with onverter) serial ports using the EST3 ECP

proto ol. In the EST appli ation the FieldServer always emulates a Client.

The FieldServer makes use of the following ECP Servi es:

Read Operations:

• Report Servi e

• Delta Servi e

Write Operations:

• Command Servi e

All read points are ontinually updated using the Report Servi e; response times are enhan ed using

Delta Servi e broad asts by the EST3 panel.

The information that follows des ribes how to expand upon the fa tory defaults provided in the

onfiguration files in luded with the FieldServer.

2. Driver Scope of Supply

2.1. Supplied By FieldServer Technologies for this Driver

FIELDSERVER

TECHNOLOGIES PART # DESCRIPTION

FS-8915-10 7’ Pat h Cable

FS-8917-03 RJ45 to DB9M Conne tor adapter

FS-8917-10 DB9F to terminal Adapter

FS-8700-39 EST3 ECP Driver Manual

2.2. Provided By the Supplier of 3

Party Equipment

2.2.1. Hardware

PART # DESCRIPTION VERSION

EST3 Gateway

2.2.2. Required 3

Party Configuration

The EST3 panel has to be set into the “Gateway Mode” using the EST3 Configuration tool (3-

SDU)

Possible Proto ols

ECP Type II Supported

ECP Type II with Text Not Supported

ECP Type III Supported

ECP Type III with Text

Not Supported

FS-8700-39 EST3 Driver Manual Page 4 of 21

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA We : www.fieldserver. om

Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver. om

3. Hardware Connections

FROM DB9F/M

Pin 2

Pin 3

Pin 5

EST3 ECP

TB2

TX 2

RX 2

COM 2

Model 8051

Fun tion

GND

8917-03

EST3 ECP

TB2

FieldServer

Conne t to one of the RS-232

Ports on the FieldServer

FS-8915-10

FS-8700-39 EST3 Driver Manual Page 5 of 21

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA We : www.fieldserver. om

Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver. om

4. Configuring the FieldServer as a EST3 Client

For a detailed dis ussion on FieldServer onfiguration, please refer to the FieldServer Configuration

Manual. The information that follows des ribes how to expand upon the fa tory defaults provided in the

onfiguration files in luded with the FieldServer (See “. sv” sample files provided with the FieldServer).

This se tion do uments and des ribes the parameters ne essary for onfiguring the FieldServer to

ommuni ate with an EST3 Server.

4.1. Data Arrays

The onfiguration file tells the FieldServer about its interfa es, and the routing of data required. In

order to enable the FieldServer for EST3 ommuni ations, the driver independent FieldServer buffers

need to be de lared in the “Data Arrays” se tion, the destination devi e addresses need to be

de lared in the “Client Side Nodes” se tion, and the data required from the servers needs to be

mapped in the “Client Side Map Des riptors” se tion. Details on how to do this an be found below.

Note that in the tables, * indi ates an optional parameter, with the old legal value being the default

Section Title

Data_Arrays

Column Title Function Legal Values

Data_Array_Name Provide name for Data Array Up to 15 alphanumeri hara ters

Data_Format Provides data format UINT16

Data_Array_Length Number of Data Obje ts 1 - 10000

Example

// Data Arrays

Data_Arrays

Data_Array_Name ,Data_Format ,Data_Array_Length

DA_AI_01 ,Float ,200

DA_AO_01 ,Float ,200

DA_DI_01 ,Bit ,200

DA_DO_01 ,Bit ,200

FS-8700-39 EST3 Driver Manual Page 6 of 21

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA We : www.fieldserver. om

Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver. om

4.2. Client Side Connection Descriptors

Section Title

Conne tions

Column Title Function Legal Values

Port Spe ify whi h port the devi e is onne ted to the

FieldServer P1-P8, R1-R2

Baud Spe ify baud rate 9600, 19200

Parity* Spe ify parity None

Data_Bits* Spe ify data bits 8

Proto ol Spe ify proto ol to be used by this port EST3

Example

// Client Side Conne tions

Conne tions

Port ,Baud ,Parity ,Data_Bits ,Proto ol

P8 ,19200 ,None ,8 ,EST3

4.3. Client Side Node Descriptors

Section Title

Nodes

Column Title Function Legal Values

Node_Name Provide name for Node Up to 32 alphanumeri

hara ters

Node_ID MAC ID of FieldServer 1 – 24 (normally 1)

Proto ol Spe ify proto ol used EST3

Port Spe ify whi h port the devi e is onne ted to

the FieldServer P1-P8, R1-R2

Timeout Spe ify time allowed between poll and

response ≥10 se onds

Example

// Client Side Nodes

Nodes

Node_Name ,Node_ID ,Proto ol ,Port ,Timeout

EST_1 ,1 ,EST3 ,P8 ,10s

Not all ports shown are ne essarily supported by the hardware. Consult the appropriate Instru tion

manual for details of the ports available on spe ifi hardware.

Edwards Re ommends 19200-baud minimum in order to prevent buffer overruns in the EST3 panel

FS-8700-39 EST3 Driver Manual Page 7 of 21

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA We : www.fieldserver. om

Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver. om

4.4. Client Side Map Descriptors

4.4.1. FieldServer Related Map Descriptor Parameters

Column Title Function Legal Values

Map_Des riptor_Name

Name of this Map Des riptor Up to 32 alphanumeri

hara ters

Data_Array_Name Name of Data Array where data

is to be stored in the FieldServer

One of the Data Array names

from “Data Array” se tion above

Data_Array_Offset Starting lo ation in Data Array 0 to maximum spe ified in “Data

Array” se tion above

Fun tion Fun tion of Client Map Des riptor

RDBC, WRBC

, WRBX

4.4.2. Driver Related Map Descriptor Parameters

Column Title Function Legal Values

Node_Name Name of Node to fet h data from

One of the node names

spe ified in “Client Node

Des riptor” above

EST_Panel Panel 0 - 63

EST_Card Card 0 - 255

Address Starting address of read blo k 0 - 1023

Length Length of Map Des riptor For Reads: 1 to 34 For Writes:

EST_Obje t_Type Obje t type parameter

Relay, Led, ServGroup,

GuardPtrl, ChkInGrp,

AltMessage, Reset, PanelSil,

AlarmSil, Drill, GAInhibit,

Reboot, Eva uate, AltSensitiv,

Partition, CmdList, Input, Zone,

Card, AndGroup, Matrix,

TimeCtrl, Instru tionText,

AmpPower, AudMsg, CmdList,

MCmsg, SetDate, SetTime

EST_Index Index parameter 0 - 65535

EST_Route Route parameter 0 - 255

EST_Priority Pri parameter 0 - 4 (see note below)

EST_Chan Chan parameter 0 - 255

EST_Msg_Index MsgIndex parameter 0 - 65535

EST_A ount A ount parameter 0 - 255

EST_ConfCL ConfCL parameter 0 - 65535

EST_Panel_Mask_1 PanelMask(1) parameter (LSB) 0 - 255

EST_Panel_Mask_2 PanelMask(2) parameter 0 - 255

EST_Panel_Mask_3 PanelMask(3) parameter 0 - 255

EST_Panel_Mask_4 PanelMask(4) parameter 0 - 255

EST_Panel_Mask_5 PanelMask(5) parameter 0 - 255

EST_Panel_Mask_6 PanelMask(6) parameter 0 - 255

EST_Panel_Mask_7 PanelMask(7) parameter 0 - 255

EST_Panel_Mask_8 PanelMask(8) parameter (MSB) 0 - 255

Data_Array_Low_S ale* S aling zero in Data Array -32767 to 32767, 0

Data_Array_High_S ale*

S aling max in Data Array -32767 to 32767, 100

Node_Low_S ale* S aling zero in Conne ted Node -32767 to 32767, 0

Node_High_S ale* S aling max in Conne ted Node -32767 to 32767, 100

WRBC is not re ommended, as startup values may be invalid

FS-8700-39 EST3 Driver Manual Page 8 of 21

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA We : www.fieldserver. om

Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver. om

Column Title Function Legal Values

EST_Alarm_DA* Data Array to store Alarm state

EST_Trouble_DA* Data Array to store Trouble

state

EST_Supervisory_DA* Data Array to store Supervisory

state

EST_Monitor_DA* Data Array to store Monitor state

EST_Others_DA*

Data Array to store state other

than Alarm, Trouble, Supervisory

or Monitor

EST_A tive_DA Data Array to store the raw value

of the a tive bit.

EST_Relay_Conf_DA

Relay onfirmation state. Refer

to Appendix A.5 for more

information.

EST_Types_DA

Data Array to hold Types

ategory. Refer to Appendix

A.5.2

One of the Data Array Names

de lared in Data Arrays se tion

EST_Types_Update

Update the default Types list or

refer to new list. Requires

'EST_Types_DA' parameter to

be defined. Refer to Appendix

A.5.3

-, yes, new list

DA_Bit_Name A knowledge State. Refer to

Appendix A.5.4

One of the Data Array Names

de lared in Data Arrays se tion

EST_Report_Type Store information from parti ular

Report

-, Point I/O Status, Sensitivity,

Date Time

Refer to Appendix A.4 and Se tion 4.4.4

FS-8700-39 EST3 Driver Manual Page 9 of 21

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA We : www.fieldserver. om

Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver. om

4.4.3. Map Descriptor Example 1

// Client Side Map Des riptors

Map_Des riptors

Map_Des riptor_Name ,Data_Array_Name ,Data_Array_Offset ,Fun tion ,Node_Name ,EST_Panel ,EST_Card ,Address ,Length ,S an_Interval

MD_LED_1 ,DA_AI_01 ,0 ,Rdb ,EST_1 ,1 ,1 ,0 ,20 ,5.0s

4.4.4. Map Descriptor Example 2:

This Map Des riptor will ause the spe ified EST point to be read every 50 se onds (subje t to throughput onstraints); the full 16-bit status

values re eived from regular polls will be stored in Data Array DA_AI_01 at offsets 0 – 19, and the Alarm, Trouble, Supervisory, Monitor or Other

status (re eived by regular poll, or Delta message) will be stored in Data Arrays TROUBLES and ALARMS, SUPERVISORY, MONITOR,

OTHERS also at offsets 0 – 19. Refer also to Appendix C.

// Client Side Map Des riptors

Map_Des riptors

Map_Des riptor_Name ,Data_Array_Name ,Data_Array_Offset ,Fun tion ,EST_Trouble_DA ,EST_Alarm_DA ,Node_Name ,EST_Panel ,EST_Card ,Address ,Length ,S an_Interval

MD_LED_1 ,DA_AI_01 ,0 ,Rdb ,TROUBLES ,ALARMS ,EST_1 ,1 ,1 ,0 ,20 ,50s

FS-8700-39 EST3 Driver Manual Page 10 of 21

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA We : www.fieldserver. om

Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver. om

Appendix A. Driver Notes

Appendix A.1. PanelMasks:

The 8 PanelMask parameters ombine to form a 64-bit field in whi h ea h bit denotes an EST panel

in the network. Commands that use the PanelMasks are exe uted by ea h panel for whi h the

orresponding bit is set. The Map Des riptor need only define non-zero bytes in the PanelMask.

Typi ally this will be EST_Panel_Mask_1 with a value of 1.

Appendix A.2. Setting up Multiple Parameters

The multiple parameters required by a ommand must be stored in onse utive lo ations in the Data

Array spe ified by the Map Des riptor, starting at the spe ified Data_Array_Offset. All parameters

must be set up before the EST ommand is exe uted. This is done using a Blo k Write (if supported

by the proto ol originating the data) – all parameters are set up in a single write operation, and the

EST ommand is triggered with all values in pla e.

Appendix A.3. Priority:

The write priority has the possible values of Set, Lat h, Low, Medium, and High. These are en oded

as 00h, 01h, 02h, 03h and 04h respe tively.

Appendix A.4. Report and Delta Service:

The EST ECP3 Report and Delta servi es report point status slightly differently. The FieldServer

EST3 driver deals with these differen es as follows:

• Report Service (regular polling):

The full 16-bit point status is stored to the Read Map Des riptor’s Data Array. If optional Data

Arrays are onfigured, then the point status is also interpreted a ording to its Alarm, Trouble,

Supervisory or Monitor status and the orresponding Data Array is updated. See Appendix A.5

for detail.

• Delta Service (unsolicited messages):

Delta Servi e messages do not provide the same 16-bit status value as supplied by the Report

Servi e. For this reason, ONLY the optional Data Arrays will be updated when a Delta message

is re eived. Delta messages will therefore only have an effe t when optional Data Arrays have

been onfigured. See 0 for detail.

Indice

Altri manuali FieldServer Magazzinaggio

FieldServer

FieldServer FS-8700-112 Manuale utente

FieldServer

FieldServer Profibus FS-8700-113 Manuale utente

FieldServer

FieldServer FS-8700-104 ControlNet X30 Manuale utente

FieldServer

FieldServer FS-8700-130 Nota di rilascio

FieldServer

FieldServer FS-8704-12 Manuale utente

FieldServer

FieldServer FS-8700-115 Manuale utente

FieldServer

FieldServer FS-8700-01 Manuale utente

FieldServer

FieldServer FS-8700-43 Manuale utente

FieldServer

FieldServer FS-8700-12 Nota di rilascio

FieldServer

FieldServer FS-8700-73 Manuale utente

FieldServer

FieldServer Honeywell Zellweger IR-148 FS-8700-102 Manuale utente

FieldServer

FieldServer FS-8700-105 Nota di rilascio

FieldServer

FieldServer Gardner Denver FS-8700-60 Manuale utente

FieldServer

FieldServer FS-8700-16 Manuale utente

FieldServer

FieldServer FS-8700-12 Manuale utente

FieldServer

FieldServer NCA2-NFS2-3030 Manuale utente

FieldServer

FieldServer FS-8704-07 Manuale utente

FieldServer

FieldServer FS-8700-01 Nota di rilascio

FieldServer

FieldServer FS-8700-66 Manuale utente

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente