Door
Warranty Card
1. Please fill out the warranty card and keep it well.
2. The warranty period of this product is 18 months.
3. The following belongs to the scope of non warranty:
a. The warranty has expired.
b. Damage occurred during or in relation to non-routine and/or unauthorized
disassembly.
c. Failure to provide a valid proof of purchase when requesting service or repair.
d. Damage occurred as a result of natural disaster.(including earthquake, fire,
flood etc.)
e. Damage occurred due to unexpected factors or man-made reasons.
(including mis-operation, improper insert or pulling, hauling, bumping,
improper voltage input and others)
4. We will charge for the repairing if it is out of warranty.
5. When the product breaks down, ask your local dealer for repair and write
out specific information below.
Product Name
Product Price
User Name
User Address
Seller Name
Seller Address
Order Number
7.2. Install the front panel.
a. Insert the suitable square steel into the
lock body.
b. Pass the connection line through the door
hole.
c. Align the square steel with the square steel
hole of the front panel and fix the front panel
on the door, then press the other end of the
square steel.
7.3. Install the back panel.
a. Press the front panel, and connect the
connection line with the corresponding
interface of the back panel, then Insert
the excess line into the door hole.
b. Insert back locking p into the lock addle
body, and you can cut off one or two
sections of back locking paddle according
to the thickness of the door.
c. Align the square steel with the square
steel hole of the back panel, and compress
the back panel.
d. Lock 2 connection column screws to fix the back panel.
e. Install 4 AA batteries and the battery cover, then lock the battery
cover screw.
Add The Administrator
1. Remove the battery cover, short press `Set`(back panel) or long press `*`, then
the voice prompts: `Please add administrator`.
2. Add admin`s fingerprint(the same fingerprint,3 times), card, or
password (6-8 numbers) and `#`(the same password, 2 times).
3. The voice prompts: `add successfully`.
4. Then you can continue to add.
Notes: 1. The first three are administrator.
2. `*`: Back, Sign out button, `#`: confirm button.
Add The User
1. Remove the battery cover, short press `Set`(back panel) or long press `*`, then
the voice prompts: `Please verify the administrator`.
2. Verify the administrator.
3. Add user`s fingerprint(the same fingerprint,3 times), card, or
password (6-8 numbers) and `#`(the same password, 2 times).
4. The voice prompts: `Add successfully`.
5. Then you can continue to add.
Delete The User
1. Remove the battery cover, short press `Set`(back panel) or long press `*`, then
the voice prompts: `Please verify the administrator`.
2. Verify the administrator.
3. Short press Set(back panel) or long press `*` again.
4. Press `1` to remove all user fingerprints, press `2` to remove all user passwords,
press `3` to remove all user cards, press `4` to remove all users.
5. The voice prompts:`successful`.
Note: The administrator can`t be removed by doing this.
Reset The Lock
1. Remove the battery cover, long press `Set` for 3 seconds.
2. The system restore to the factory default settings.
Notes:
1. After the reset, all the information are removed (including administrator).
2. Administrator password will return to its default `1234567890`.
3. Please add a new administrator immediately.
APP Installation
1. Search `tuyaaoni` in APP store, download and install APP.
2. Registration and login with the mobile phone number.
3. Please refer to the operation prompt to complete the network configuration.
Add Network
1. Short press `3`+`#`, Verify the administrator.
2. Network configuration mode: press # to change.
a. Normal mode: the LED of `8` fast flash, please add network in APP.
b. Compatibility mode: the LED of `8` slow flash, please add network in the
Compatibility mode of APP.
3. Add successfully: The voice prompts `add successfully`.
4. Add failure: LED light show `X` and the voice prompts `add failure`.
Self-locking
If the password is entered wrong for 5 times continuously, the system will be locked
for 180 seconds, and the fingerprint or card unlock can remove self-locking.
Low Power Warning
When the battery power is lower than 4.8V, the lock will prompt `The battery is use
up, please replace it`, please replace with 4 new batteries in time.
Virtual Password
Enter virtual password before or after the real password, it can be unlocked.
Using The Lock
4.72 Inch 1.77 or 2.17 Inch 2.76 and 3.54 Inch3.55-3.94 Inch
5.51 Inch 1.77 or 2.17 Inch 3.54 and 4.33 Inch
>3.94 Inch
6. Choose The Parts
Choose suitable parts according to the following table.
Door thickness
Square Steel
Connection Column
3.15 Inch 1.38 Inch
1.18 and 1.97 Inch
3.15 Inch
3.94 Inch
Connection Column
1.77 or 2.17 Inch 1.18 and 1.97 I n c h
1.77 or 2.17 Inch
1.57-2.16 Inch
2.17-2.36 Inch
2.76-3.15 Inch 1.97 and 2.76 Inch
Length Length Screw Length
7.1. Install 2 connection columns
on the front panel.
7. Install The Lock
8. Install Buckle Plate And Buckle Box
Tapping Screw
Buckle Plate
Buckle Box
Door Frame
Back Locking Paddle
a
b
c
d
d
Connection Column
Door
Screws Hole
Square
Steel
Hole
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
Product Model
Date of Purchase
User Phone
Seller Phone
Maintenance records(Filled in by the maintenance agency)
Date Fault Result Signature
