Fini AF 250 Manuale utente

EN -

ADSORPTION AIR DRYER

IT -

ESSICCATORE AD ADSORBIMENTO

ADSORPTIONSTROCKNER

SECADOR POR ADSORCIÓN

Use and maintenance Manual

Manuale d’uso e manutenzione

Handbuch für Betrieb und Wartung

Manual de uso y mantenimiento

AF 250

AF 30

VKM - VKMT 600

CPL – OL 102 - 150 - 300

Codice

710.0054.02.00

Rev.3A

I DICHIARAZIONE DI CONFORMITÁ ALLA DIRETTIVA MACCHINE 2006/42/CE GR DH/LWSH SUMMO/RFWSHS STHN ODHGI/A MHXANHMA/TWN 2006/42/EE

GB DECLARATION OF CONFORMITY WITH THE MACHINERY DIRECTIVE 2006/42/EC PL DEKLARACJA ZGODNOŚCI Z DYREKTYWĄMASZYNOWĄ2006/42/EC

F DECLARATION DE CONFORMITE AVEC LA DIRECTIVE MACHINES 2006/42/CE CZ PROHLÁŠENÍ O SHODĚSE SMĚRNICÍ O STROJÍCH 2006/42/ЕS

D KONFORMITÄTSERKLÄRUNG MIT DER MASCHINENRICHTLINIE 2006/42/EG SK DEKLARÁCIA O ZHODE SO SMERNICOU O STROJOCH 2006/42/ЕS

E DECLARACION DE CONFORMIDAD A LA DIRECTIVA MAQUINAS 2006/42/CE H TANÚSÍTVÁNY A GÉPEKRE VONATKOZÓ 2006/42/ЕС SZ. IRÁNYELVNEK VALÓ

NL VERKLARING VAN OVEREENSTEMMING MET DE MACHINERICHTLIJN 2006/42/EG MEGFELELÉSRİL

N ERKLÆRING OM OVERENSSTEMMELSE MED MASKINDIREKTIVET 2006/42/EC LT ATITIKIMO MAŠINŲDIREKTYVAI 2006/42/ES DEKLARACIJA

S FÖRSÄKRAN OM ÖVERENSSTÄMMELSE MED MASKINDIREKTIVET 2006/42/EG LV DEKLARĀCIJA PAR ATBILSTĪBU MAŠINU DIREKTIVAI 2006/42/ЕС

DK ERKLÆRING OM OVERENSSTEMMELSE MED MASKINDIREKTIVET 2006/42/EC EST DEKLARATSIOON VASTAVUSE DIREKTIIVILE AUTODELE 2006/42/CE

P DECLARAÇÃO DE CONFORMIDADE COM A DIRECTIVA MÁQUINAS 2006/42/CE SLO DEKLARACIJA O SKLADNOSTI S PREDPISI, KI VELJAJO ZA STROJE 2006/42/EU

FI KONEDIREKTIIVIN 2006/42/EC VAATIMUSTENMUKAISUUSVAKUUTUS RO DECLARATIE DE CONFORMITATE CONFORMA CU DIRECTIVA MASINI 2006/42/CE

RU ДЕКЛАРАЦИЯ СООТВЕТСТВИЯ ДИРЕКТИВЕ ПО МАШИНАМ 2006/42/ЕС

Sede: Fini S.p.A. Via Toscana 21 40069 Zola Predosa – Bologna – ITALY

I - Dichiara sotto la sua esclusiva responsabilità,che il prodotto qui

di seguito descritto è conforme alle prescrizioni di sicurezza delle

direttive:

FI - vakuuttaa, että seuraavassa esitelty tuote vastaa alla

lueteltujen direktiivien turvallisuusvaatimuksia:

GB - Declares under its sole responsibility that the

product described below complies with the safety requirements

of directives:

GR - ∆ηλώνει µε αποκλειστικά δική του ευθύνη ότι το προϊόν που

περιγράφεται παρακάτω ανταποκρίνεται στις προδιαγραφές

ασφαλείας των οδηγιών:

F - Déclare sous son entière responsabilité que le produit décrit ci-

après est conforme aux prescriptions de sécurité des directives : PL - o wiadcza pod wyłącznąwłasnąodpowiedzialno cią, Ŝe

opisany poniŜej wyrób odpowiada wymaganiom dotyczącym

bezpieczeństwa zawartym w Dyrektywach:

D - erklärt unter ihrer alleinigen Verantwortung, dass das in Folge

beschriebene Produkt den Sicherheitsvorschriften

der folgenden Richtlinien entspricht:

CZ - prohlašuje s plnou odpovědností, že uvedený výrobek

vyhovuje bezpečnostním požadavkům směrnic:

E - Declara bajo su exclusiva responsabilidad que el producto

descrito a continuación responde a las prescripciones de

seguridad de las directivas :

SK - Zodpovedne vyhlásuje, že uvedený výrobok zodpovedá

bezpečnostným požiadavkám smerníc:

NL - Verklaart onder zijn eigen verantwoordelijkheid dat het

hieronder beschreven product in overeenstemming is met de

veiligheidsvoorschriften van de richtlijnen:

H - teljes felelısségének tudatában tanúsítja, hogy az alábbiakban

jellemzett termék a sz. irányelvek biztonsági követelményeinek

megfelel.

N - Erklærer under eget ansvar at produktet her beskrevet er i

overensstemmelse med sikkerhetsforskriftene i direktivene: LT - Su visa atsakomybe pareiškia, kad žemiau aprašytas gaminys

atitinka direktyvųsaugumo reikalavimams.

S - Försäkrar under eget ansvar att den produkt som beskrivs

följande är i överensstämmelse med säkerhetsföreskrifterna i EU-

direktiv:

LV - Apliecina, uzĦemoties pilnu atbildību, ka zemāk aprakstītais

produkts atbilst direktīvu drošības noteikumiem.

DK - Forsikrer på eget ansvar, at produktet, der beskrives

nedenfor, er i overensstemmelse med sikkerhedsforskrifterne i

direktiverne:

EST - Deklareerib omal vastutusel, et allpool kirjeldatud toode

vastab direktiivide ohutusnõuetele.

P - Declara sob a sua exclusiva responsabilidade que o produto

descrito a seguir está em conformidade com as prescrições de

segurança das directivas:

SLO - Na lastno odgovornost izjavlja, da je spodaj opisani izdelek

v skladu z varnostnimi predpisi, ki veljajo za stroje

2006/42/CE – 2006/95/CE : EN60204-1:2006

2004/108/CE : EN61000-6-2:2005, EN61000-6-4:2007

Roberto Rebuffo,Via Toscana 21 40069 Zola Predosa (Italy) persona autorizzata a costituire il fascicolo tecnico / person authorised to compile the technical file /

personne autorisée à constituer le dossier technique / die bevollmächtigt ist, die technischen Unterlagen zusammenzustellen / persona facultada para elaborar el

expediente técnico / van degene die gemachtigd is het technisch dossier samen te stellen / personen som er autorisert til å kompilere den tekniske arkiv / den person

som är behörig att ställa samman den tekniska dokumentationen / person, der har bemyndigelse til at udarbejde det tekniske dossier / pessoa autorizada a compilar o

processo técnico / sen henkilön joka on valtuutettu kokoamaan teknisen eritelmän / προσώπου του εξουσιοδοτηµένου να καταρτίσει τον τεχνικό φάκελο / osoby

upowaŜnionej do przygotowania dokumentacji technicznej / osoby pověřené sestavením technické dokumentace / osoby oprávnenej na zostavenie súboru technickej

dokumentáciev / felhatalmazott személy a mőszaki dokumentáció összeállítására / įgalioto sudaryti atitinkamątechninębylą/ kura pilnvarota sastādt tehnisko lietu /

Vastutav koostada tehniline toimik / osebe pooblaščene za sestavljanje tehnične dokumentacije / persoanei autorizate pentru întocmirea cărții tehnice

Presidente/ Chairman/ Président / Vorsitzender /Presidente/ Voorzitter/

Formann / Ordförande/ Præsident/ Presidente/Presidentti/PrÒedroj/

Prezes społki / Předseda/ Prezident/ Elnök/ Pirmininkas / Priekšsēdētājs /

Juhataja/ Direktor /Presedinte/ Президент

Marco Fini

1 / 25 Cod. 710.0054.02.00 rev.3A – 09.2010

- EN - INDEX - IT - INDICE

1.0. PERFORMANCE AND SPECIFICATIONS 1.0. PRESTAZIONI E DATI TECNICI

2.0. INTENDED USE 2.0. USO PREVISTO

3.0. SYMBOLS 3.0. SIMBOLOGIA

4.0. SAFETY INSTRUCTIONS 4.0. NORME DI SICUREZZA

4.1. General pre autions 4.1. Norme generali

4.2. Safety pre autions for maintenan e operations 4.2. Norme di si urezza per gli interventi di

manutenzione

5.0. HANDLING AND INSTALLATION 5.0. MOVIMENTAZIONE ED INSTALLAZIONE

5.1. Handling instru tions 5.1. Istruzioni per la movimentazione

5.2. Installation requirement 5.2. Requisiti per l'installazione

5.3. Pneumati onne tion 5.3. Collegamento pneumati o

5.4. Ele tri al onne tion 5.4. Collegamento elettri o

5.5. Filtering and a essories 5.5. Filtri ed a essori

6.0. MACHINE USE 6.0. IMPIEGO DELLA MACCHINA

6.1. Start up 6.1. Avvio

6.2. Operation 6.2. Funzionamento

6.3. Shut down 6.3. Dismissione

7.0. MAINTENANCE 7.0. MANUTENZIONE

8.0. TROUBLESHOOTING 8.0. RISOLUZIONE PROBLEMI

--------- ATTACHMENTS --------- ALLEGATI

Data sheet S heda te ni a

Dimensions Dimensioni

Wiring diagrams S hemi elettri i

Spare parts and onsummable material odes Ri ambi onsigliati

- DE - INHALTSVERZEICHNIS - ES - ÍNDICE

1.0. LEISTUNGEN UND TECHNISCHE DATEN 1.0. RENDIMIENTO Y DATOS TÉCNICOS

2.0. VORAUSGESEHENER GEBRAUCH 2.0. USO

3.0. SYMBOLE 3.0. SÍMBOLOS

4.0. SICHERHEITSNORMEN 4.0. NORMAS DE SEGURIDAD

4.1. Gesamtvors hiften 4.1. Normas generales

4.2. Si herheitsvors hriften Zur Wartungmassnahme 4.2. Informa ión de seguridad para el mantenimiento

5.0. UMGANG UND AUFSTELLUNG 5.0. MANEJO E INSTALACIÓN

5.1. Anweisungen zum si heren Umgang 5.1. Instru iones para el manejo

5.2. Aufstellungsbedingung 5.2. Requisitos para la instala ión

5.3. Pneumatis her Ans hluss 5.3. Conexión neumáti a

5.4. Elektris her Ans hluss 5.4. Conexión elé tri a

5.5. Filtration und Zubehöre 5.5. Filtros y A esorios

6.0. VERWENDUNG DER MACHINE 6.0. USO DE LA MÁQUINA

6.1. Inbetriebnahme 6.1. Ini io

6.2. Betrieb 6.2. Fun ionamiento

6.3. Stilllegung 6.3. Desmantelamiento

7.0. WARTUNG 7.0. MANTENIMIENTO

8.0. STÖRUNGSSUCHE 8.0. SOLUCIÓN DE PROBLEMAS

--------- BEILEGUNGEN --------- ANEXOS

Te hnis he Karte Fi has té ni as

Abmessungen Dimensiones

S haltpläne Esquema elé tri o

Ersatzteilliste Piè es De Re hange Essentielles

2 / 25 Cod. 710.0054.02.00 rev.3A – 09.2010

- EN -

All features of this ma hine, all information on safety, ma hine installation, operation, adjusting and maintenan e are

des ribed in this manual. It is integral part of this ma hine.

Should this ma hine be sold again, this manual should be given to the new ma hine owner.

Should this manual be lost, please ask for a new opy to your authorized dealer.

The information given in this handbook is for guidan e purpose only and is not binding. The Manufa turer reserves the right to make

any produ t modifi ations its onsiders ne essary without prior noti e.

Before installing or operating the ma hine, read this handbook and always omply with the instru tions provided. They explain the

orre t use and routine maintenan e of the dryer and the safety pre autions ne essary to ensure operator safety.

WARRANTY

Ea h produ t is delivered regularly tested, and overed by the warranty onditions spe ified on the sales list and/or on the supply

ontra t.

1.0 PERFORMANCE AND SPECIFICATIONS

This ma hine has been designed and realized in omplian e with U.S.A. regulations. A plate indi ating the spe ifi ations is applied to

the ma hine.

Models:

•

Standard (“S” models)

•

Refrigerated (“R” models with pre- ooling oil)

Drying units with “ Heat - Less “ working pro ess use hemi al-physi s property of drying materials to adsorbing humidity from air and

expelling it during regeneration phase. The regeneration is performed with draining of a small part of dried air, olle ted from outlet,

whi h removes humidity from the exhausted adsorbing bed dis harging it into atmosphere.

The plant (see s heme) mainly onsists of two adsorbers whi h ontain harge of drying material.

Inside the adsorbers stainless filter are provided to retain eventual solid impurities out oming.

The valves fore ast for the different automati fun tions, are suitable for heavy ontinuous operation.

No parti ular maintenan e or lubrifi ation are ne essary on the valves.

The ontrols are performed by solenoid valves whi h drive the valves.

The ontrol logi is ele troni and ompletely automati .

The ma hine has a light swit h for starting and stopping.

Performan e and spe ifi ations shown in the following atta hments:

•Data sheet

•Wiring diagram

2.0 INTENDED USE

These dryers have been developed to automati ally eliminate the moisture ontained in ompressed air or an inert gas. Adsorbent

material dries the air passing through one of the two pressure vessels. Simultaneously, the other pressure vessel is regenerated by

purging a small volume of the dried air from the outlet of first pressure vessel.

The ompressed air / gas supplied by the dryer annot be used for breathing air, pharma euti al or sanitary purposes or in produ tion

plants where the output air omes into dire t onta t with foodstuff, unless an additional air treatment system is employed, whi h is

spe ifi ally designed for this purpose.

The dryer is not suitable for use in "explosion or hazardous" environments.

The Manufa turer is not responsible for any use other than the intended use, or for operation, whi h is not in omplian e with the

instru tions in this manual.

3 / 25 Cod. 710.0054.02.00 rev.3A – 09.2010

3.0 SYMBOLS

Air inlet Air outlet Electric shock

danger

4.0 SAFETY INSTRUCTIONS

4.1 GENERAL PRECAUTIONS

CAU ION : Use of the ma hine by unskilled personnel without adequate supervision is not allowed.

The ma hine is designed solely to dry ompress ed air or inert gas and annot be used for any other type of gas.

The ompressed air inlet to the dryer must be absolutely free of dust, vapors, explosive or flammable gas, solvents and toxi fumes of

any kind. Use of ompressed air or inert gas requires knowledge of, and omplian e with the safety pre autions to be adopted for the

individual appli ations.

WARNING : Before starting the ma hine, make sure that all guards are orre tly fitted and that no-one an be dire tly or indire tly

injured by the sudden flow or ompressed gas within the pipework system without noti e.

Dryer operation is automati .

Remember that ompressor oil, ondensate and the filter element are pollutants. Dispose of these produ ts

in omplian e with lo al legislation.

4.2 SAFETY PRECAUTIONS FOR MAINTENANCE OPERATIONS

Skilled operators must perform all maintenan e.

•

Dis onne t the power supply and depressurize the dryer performing any servi e operation.

•

After dis onne ting the power, lo k out the ir uit breaker to prevent a idental start-up. Isolate the dryer from the ompressed air

system losing the input valve.

•

All ompressed air has been dis harged from the dryer only when pressure gauge shows zero pressure.

•

No hanges must be made to dryer’s internal ele tri al or pneumati ir uits and/or to the fa tory settings.

•

Do not use solvents, flammable or toxi fluids to lean the dryer parts. Never use detergents to lean the ele tri al/ele troni s

omponent.

•

Do not weld or arry out me hani al ma hining operations on the pressure vessels. If damaged or rusted, repla e the parts, as they

subje t to spe ifi regulations.

•

At the end of ea h operation, refit the guards arefully.

5.0 HANDLING AND ISTALLATIONS

Before installing the dryer:

•

Che k the dryer for shipping damage and inform immediately supplier.

•

Verify that the nominal operating onditions are appli able to the installation.

5.1 HANDLING INSTRUCTIONS

Be areful at manual handling. Use a hand tru k or the most suitable equipment

he weight of the dryer does not exceed 12 Kg (26 Lbs)

5.2 INSTALLATION REQUIREMENT

The dryer is supplied omplete and ready for indoor installation. It must be prote ted against atmospheri onditions. Fa tory-

approved prote tion is required if the dryer is lo ated outdoors. Outdoor use is not re ommended.

4 / 25 Cod. 710.0054.02.00 rev.3A – 09.2010

The dryer operating limits are:

•

Minimum ambient temperature + 5 °C + 40 °F

•

Maximum ambient temperature + 45 °C + 113 °F

Spa e heating is required if the minimum above minimum temperature annot be insured.

These dryers are designed for wall mounting.

Make sure there is suffi ient servi e spa e around the dryer.

5.3 PNEUMATIC CONNECTION

Inlet / outlet onne ting piping must not transmit vibrations or stress to the plant.

A 3-valve ompressed air by-pass is re ommended to semplify servi e.

If the dryer is installed between the ompressor and the air re eiver, a relief valve, set for 11 bar (160 psig) must be installed on the

inlet piping to the dryer.

5.4 ELECTRICAL CONNECTION

The ele tri al power system must in lude a main ir uit breaker with fuses or ground ir uit breaker whi h an be lo ked out.

The devi e must be suited to the ma hine spe ifi ations and set up to prevent a idental onta ts in order to prote t the personnel.

The ele tri al systems must be made a ording to best pra ti e prin iples. A skilled ele tri ian must he k the effi ien y of the earth

system.

Provide the earth onne tions as foreseen by the rules in for e in the ountry of operating of the system.

5.5 FILTERING AND ACCESSORIES

If lubrifi ated air ompressors are used, it is ne essary to install a oales ing oli pre-filter before the dryer rated at a minimum

effi ien y of 0,1 mg/m

(0,1 PPM). All must be fitted with a parti ulate after-filter rated at minimum effi ien y of 20 mi rons to prevent

the arry-over of dessi ant dust into the ompressed air system.

6.0 DRYER USE

6.1 START - UP

The Customer is responsible for installing the dryer and making the required ele tri al and pneumati onne tions.

Skilled personnel must arry out initial system start-up.

•

Remove all pa kaging materials and tools.

•

Slowly pressurize with inter epted outlet.

•

Swit h on the power supply.

During the first installation or after the repla ement of desi ant harge, the dryer must be re onditioned by operating with

ompressed air and losed outlet air for about one hour. This insures full performan e.

6.2 OPERATION

The ontrols are alibrated for nominal working onditions.

In ase of different onditions:

•

Higher temperature of inlet ompressed air.

•

Lower pressure of inlet ompressed air.

•

Lower dew-point

•

Faster drying rate.

Conta t your Seller or a Servi e Centre.

6.3 SHUT DOWN

•

Close the by-pass valve

•

Completely depressurize the dryer.

•

Swit h off the ON/OFF button (optional).

•

Dis onne t and lo k out the power supply

5 / 25 Cod. 710.0054.02.00 rev.3A – 09.2010

7.0 MAINTENANCE

Before pro eeding with maintenan e, depressurize dryer and turn dis onne t power supply as explain above.

ROUTINE MAINTENANCE OPERATIONS EVERY

WEEK EVERY

3 MONTHS

EVERY

YEAR

Verify nominal working onditions

(pressure , inlet air temperature, et .)

Verify the orre t working of all drainers installed, if ne essary manually drain

pre and after filter, re eiver tank (if appli able), all ondensate drains before dryer

Che k oil oales ing pre filter ondition (not supplied with the dryer):

A. Element ondition.

B. Effi ien y of filter oales ed liquid dis harger (manual or automati type).

C. Repla e Element

Che k dust after filter ondition (not supplied with the dryer):

A. Element ondition

B. Repla e Element (presen e of possible oil tra es)

Che k Dryer unit:

A. Che k the proper operating sequen e of the dryer

B. Che k dis harge mufflers (must be without any oil tra es)

C. Repla e dessi ant harge of ea h dryer olumn

During the first installation or after the repla ement of desi ant harge, the dryer must

be re onditioned by operating with inter epted outlet air for about one hour.

8.0 TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSES

SOLU ION

Wet outlet air

A. Higher air flow.

B. Low inlet air pressure.

C. High inlet air temperature.

D. Desi ant harge satured with moisture or oil .

E. Lower purge air.

F. Regeneration pressure in the vessel.

A. Che k operating onditions.

B. Che k operating onditions.

C. Che k operating onditions.

D. Che k the separation and pre-filter before the dryer.

E. Che k purge orifi e.

F. Che k (repla e or lean) the purge muffler.

Operation failure

A. Power supply failure.

B. Ele trovalve failure.

C. Timer failure.

A. Che k the voltage, the fuses and the main swit h.

B. Che k the presen e of signals on the solenoid

valves – Repla e if ne essary.

C. Che k the timer – Repla e if ne essary.

Purge failure

A. Blo ked purge air orifi e .

B. Blo ked muffler.

C. Timer failure.

A. Clean or repla e the orifi e.

B. Clean or repla e the muffler.

C. Che k the timer. Repla e if ne essary.

Pressure in the

regeneration phase

(max. 0,5 bar – 7,3 psi)

A. Depressurization valve not ompletely

opened.

B. Blo ked dis harge muffler.

A. Che k valve and relative pilot valve.

B. Clean or repla e mufflers.

Dryer pressure drop

A. High air flow

B. Low inlet air pressure

C. Blo ked internal s reens

D. Desi ant deterioration

A. Che k operating onditions.

B. Che k operating onditions.

C. Disassembe the dryer and lean s reens.

D. Repla e desi ant.

6 / 25 Cod. 710.0054.02.00 rev.3A – 09.2010

- IT -

Nel presente manuale vengono des ritte le aratteristi he della ma hina e tutte le operazioni he ne riguardano la

si urezza, l'installazione, l'avviamento, il normale funzionamento, la regolazione, la manutenzione e la dismissione.

Il manuale è parte integrante della ma hina. In aso di rivendita della ma hina deve essere onsegnato al nuovo

proprietario. In aso di smarrimento ri hiederne un dupli ato al nostro rivenditore autorizzato.

Tutte le informazioni ontenute in questo manuale sono da ritenersi fornite a titolo indi ativo e non impegnativo. Il Costruttore si

riserva la fa oltà di apportare ai prodotti le eventuali modifi he he ritiene opportune senza al un preavviso.

Prima di pro edere all'avvio della ma hina leggere attentamente il manuale e seguire tutte le indi azioni in esso riportate allo s opo

di onos ere le modalità d'utilizzo e di manutenzione e le ne essarie pre auzioni da adottare.

GARANZIA

Ogni prodotto è fornito regolarmente ollaudato, ed è garantito se ondo le ondizioni riportate sul listino di vendita e/o sul ontratto di

fornitura.

1.0 PRESTAZIONI E DATI TECNICI

Questa ma hina è stata progettata e realizzata in onformità alle norme e regolamentazioni Europee e/o degli U.S.A. E' dotata di

una targhetta riportante i dati pe uliari e le regolamentazioni di riferimento.

Versioni della ma hina:

•

standard

•

refrigereted ( on serpentina di refrigerazione)

L'essi atore realizza un "pro esso senza alore" (Heat-Less) utilizzando la proprietà himi o-fisi a dei materiali essi anti di

adsorbire l'umidità dell'aria per poi espellerla nella su essiva fase di rigenerazione. Questa avviene mediante lo spurgo di una

pi ola parte di aria se a prelevata dall'us ita, he attraversa il letto adsorbente esaurito per asportarne l'umidità e viene s ari ata in

atmosfera.

L'impianto è ostituito da due adsorbitori he ontengono la ari a di materiali essi ante.

All'interno sono ollo ati filtri inox per fermare eventuali impurità solide.

Le valvole he svolgono le varie funzioni automati he sono realizzate per utilizzo gravoso ontinuativo.

Non sono ri hieste sulle valvole né parti olari manutenzioni né lubrifi azioni.

La logi a di omando è ompletamente automati a.

La ma hina ha un interruttore luminoso per lo START e lo STOP.

Le prestazioni ed i dati te ni i sono riportati nei seguenti allegati:

•

Dati te ni i / Data sheet

•

S hema elettri o / Wiring diagram

2.0 USO PREVISTO

L'essi atore è stato previsto uni amente per eliminare automati amente tutta l'umidità ontenuta nell'aria ompressa o in un gas

inerte passando attraverso uno dei due serbatoi adsorbitori, ontemporaneamente viene rigenerato l'altro serbatoio adsorbitore

prelevando una pi ola quantità d'aria (o gas) trattata dal primo.

A meno di un trattamento addizionale adeguato, l'aria ompressa in us ita dall'essi atore non può essere utilizzata direttamente per

s opi respiratori, per usi farma euti i o sanitari, per impianti produttivi in ui l'aria ha un ontatto diretto on gli alimenti.

La ma hina non è prevista per operare in ambienti lassifi abili "a ris hio di esplosione".

In aso di utilizzazione diversa o non onforme a quanto riportato nel presente manuale, nessuna responsabilità potrà essere

addebitata alla Ditta ostruttri e

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Fini Deumidificatore

Fini

Fini RD 185-810 Manuale utente

Manuali Deumidificatore popolari di altre marche

Daitsu

Daitsu CD031IU-DFA Manuale utente

Fehom

Fehom PDGT701BE Manuale utente

Hitachi

Hitachi RD-190GX Manuale utente

Westpoint

Westpoint MDF1-30AE Manuale utente

SOLIS

SOLIS easy dry compact Manuale utente

ENVIROBOSS

ENVIROBOSS EB240 Manuale utente

Sinclair

Sinclair R-9112 Manuale utente

Kenmore

Kenmore 580.54701 Manuale utente

Demargo

Demargo DM828NF Manuale utente

Altrad Lescha

Altrad Lescha LDH 600 Manuale utente

BOMANN

BOMANN LE 1150 CB Manuale utente

SPT

SPT SD-46 Manuale utente

REMKO

REMKO SLN 40 Manuale utente

Haier

Haier HD458 Manuale utente

Logik

Logik L20DHW12 Manuale utente

Frigidaire

Frigidaire FDR30S1 - 30 Pint Capacity Dehumidifier Guida rapida

Blitz

Blitz HHD Series Manuale utente

Prem-I-Air

Prem-I-Air PD14DEN Manuale utente