FIOCCHETTI SUPERFREEZER ECO 70 Guida utente

The manufacturer works constantly on the further development

of all the types and models. Therefore please understand that

we have to reserve the right to make design, equipment and

technical modifications.

To get to know all the benefits of your new appliance, please

read the information contained in these instructions carefully.

Instructions for action are marked with a , the results of

action are marked with a .

1 Appliance at a glance

1.1 Description of appliance and equip-

ment

Note

uShelves, drawers and baskets are arranged for optimum

energy efficiency on delivery.

Fig. 1

(1) Operating controls (4) Type plate

(2) VarioSpace (5) Adjustable feet

(3) Drawer

1.2Range of appliance use

Misuse of the appliance can result in the stored products

suffering harm or perishing. Furthermore, the appliance is not

suitable for operation in potentially explosive atmospheres.

The appliance is set to operate within specific ambient temper-

ature limits according to its climate rating. The correct climate

rating for your appliance is indicated on the type plate.

Note

uCompliance with the ambient temperatures indicated is

required, otherwise the cooling performance is reduced.

Climate

rating

for ambient temperatures

SN-T from +10°C to +43°C

Appliance at a glance

1.4 External dimensions of the appli-

ance

Fig. 2

Model h a g e e' d c c'

70 6315536116246531129563592

1.5 Saving energy

-Always ensure good ventilation. Do not cover ventilation

openings or grille.

-Do not place appliance in areas of direct sunlight or next to a

heater or similar object.

-The energy consumption depends on the installation condi-

tions, e.g. the ambient temperature (see 1.2) .

-Keep the time the appliance is open to a minimum.

-The lower the temperature setting, the higher the power

consumption.

-Ensure that all products are well packed for storage.

This will prevent frost from forming.

-If there is a thick layer of frost in the appliance: defrost the

appliance.

Accumulated dust increases the energy

consumption:

-Once a year, dust the refrigerating unit

together with the metal grille of the heat

exchanger at the back of the appliance.

2 General safety information

Danger for the user:

-This appliance is not designed for persons (including chil-

dren) with physical, sensory or mental impairment or

persons not having sufficient experience and knowledge,

unless they are instructed in the use of the appliance and

are initially supervised by a person responsible for their

safety. Keep children under supervision to ensure they do

not play with the appliance.

-In case of a fault, pull out the mains plug (not by pulling the

connecting cable) or switch off the fuse.

-Have any repairs to or intervention in the appliance, and any

change of the mains power cable, carried out by the

customer service only or by other specialised personnel

trained for the purpose.

-When disconnecting the appliance from the supply, always

take hold of the plug. Do not pull the cable.

-Install and connect the appliance only as instructed.

-Please keep these instructions in a safe place and pass

them on to any subsequent owners.

Fire hazard:

-The refrigerant R 600a is environmentally friendly but flam-

mable. Escaping refrigerant may ignite.

•Do not damage the refrigerant circuit pipes.

•Do not allow naked flames or ignition sources to enter the

appliance.

•Do not use any electrical appliances in the interior

•If refrigerant escapes: eliminate naked flames or sources

of ignition from the vicinity. Pull out the power plug. Venti-

late the area well. Notify customer service.

-Do not store explosives or sprays using combustible propel-

lants such as butane, propane, pentane, etc. in the appli-

ance. To identify these spray cans, look for the list of

contents printed on the can, or a flame symbol. Gases

possibly escaping may ignite due to electrical components.

-Keep burning candles, lamps and other items with naked

flames away from the appliance so that they do not set the

appliance on fire.

-Always store high-percentage alcohol in tightly sealed,

upright containers. Alcohol possibly escaping may ignite

due to electrical components.

Danger of tipping and falling:

-Do not misuse the plinth, drawers, doors etc. as a step or for

support. This applies particularly to children.

Danger of frostbite, numbness and pain:

-Avoid lasting skin contact with cold surfaces or refrigerated/

frozen product or take protective steps, e.g. wear gloves.

Please observe the specific information in the other

sections:

DANGER identifies a situation involving direct

danger which, if not obviated, may

result in death or severe bodily

injury.

WARNING identifies a dangerous situation

which, if not obviated, may result in

death or severe bodily injury.

CAUTION identifies a dangerous situation

which, if not obviated, may result in

minor or medium bodily injury.

NOTICE identifies a dangerous situation

which, if not obviated, may result in

damage to property.

Note identifies useful information and tips.

General safety information

3 Controls and displays

3.1 Operating and control elements

Fig. 3

(1) On/Off button (6) Menu symbol

(2) Setting button (7) Alarm symbol

(3) Temperature display (8) Brightness symbol

(4) SuperFrost button (9) Child lock symbol

(5) SuperFrost symbol

3.2 Temperature display

The following are displayed in normal operation:

-the set freezing temperature

The temperature display flashes:

-the temperature setting is being changed

-after switch-on the temperature is not yet cold enough

-the temperature has risen several degrees

4 Putting into operation

4.1 Transporting the appliance

CAUTION

Risk of injury and danger of damage as a result of incorrect

transport!

uTransport the appliance in a packed condition.

uTransport the appliance upright.

uDo not transport the appliance without assistance.

4.2 Installing the appliance

WARNING

Fire hazard due to dampness!

If live parts or the mains lead become damp this may cause

short circuits.

uThe appliance is designed for use in enclosed areas. Do not

operate the appliance outdoors or in areas where it is

exposed to splash water or damp conditions.

WARNING

Risk of fire due to short circuit!

If the mains cable/connector of the appliance or of another

appliance touch the rear of the appliance, the mains cable/

connector may be damaged by the appliance vibrations,

leading to a short circuit.

uStand the appliance so that it is not touched by connectors

or main cables.

uDo not plug the appliance or any others into sockets located

near the rear of the appliance.

WARNING

Fire hazard due to refrigerant!

The refrigerant R 600a is environmentally friendly but flam-

mable. Escaping refrigerant may ignite.

uDo not damage the piping of the refrigeration circuit.

WARNING

Fire hazard and danger of damage!

uDo not place appliances emitting heat on the appliance!

WARNING

Blocked ventilation openings pose a risk of fire and damage!

uAlways keep the ventilation openings clear. Always ensure

that the appliance is properly ventilated!

qIn the event that the appliance is damaged, contact the

supplier immediately before connecting to the mains.

qThe floor at the site must be flat and level.

qDo not install the appliance in a location where it is exposed

to direct radiation of the sun, next to a heat source and

similar.

qThe ideal installation site is a dry, well ventilated room.

qAlways stand the appliance backed directly to the wall using

the enclosed wall spacers (see below).

qThe appliance may be moved only when it is empty.*

qDo not install the appliance without assistance.

qStandard EN 378 specifies that the room in which you install

your appliance must have a volume of 1 m2 per 8 g of R

600a refrigerant used in the appliance. If the room in which

the appliance is installed is too small, a flammable gas-air

mixture may form in the event of a leakage in the refrigera-

tion circuit. The quantity of refrigerant used in your appliance

is indicated on the type plate on the inside of the appliance.

uDetach the connecting cable from the rear of the appliance,

removing the cable holder at the same time because other-

wise there will be vibratory noise!

uRemove all transit supports.

uDispose of packaging material (see 4.5) .

uAlign the appliance so that it

stands firmly and on a level by

applying the accompanying

spanner to the adjustable-

height feet (A) and using a

spirit level.

Note

uClean the appliance (see 6.2) .

If the appliance is installed in a very damp environment,

condensate may form on the outside of the appliance.

uAlways see to good ventilation at the installation site.

4.3 Changing over the door hinge*

You can change over the door hinges if necessary.

Make sure that the following tools are at hand:

qTorx® 25

Controls and displays

qTorx® 15

qSupplied open-ended wrench

qIf necessary, a second person to assist with installation

CAUTION

Risk of injury if the door tips!

uTake good hold of the door.

uSet down the door carefully.

Fig. 4 On appliances with a door handle

Fig. 5 On appliances without a door handle

uFollow the sequence of the item numbers in the diagram.

4.5 Disposing of packaging

WARNING

Danger of suffocation due to packing material and plastic film!

uDo not allow children to play with packing material.

The packaging is made of recyclable materials:

-corrugated board/cardboard

-expanded polystyrene parts

-polythene bags and sheets

-polypropylene straps

-nailed wooden frame with polyethylene panel*

uTake the packaging material to an official collecting point.

4.6 Connecting the appliance

NOTICE

Risk of damage to the electronic control system!

uDo not use stand-alone inverters (conversion of d.c. to a.c./

three-phase) or energy saving plugs.

Putting into operation

WARNING

Fire and overheating hazard!

uDo not use extension cables or multiple socket outlets.

The type of current (alternating current) and voltage at the

installation site have to conform with the data on the type plate

(see Appliance at a glance).

Connect the appliance only with a properly installed

socket outlet with earthing contact. The socket outlet

must be fused with 10 A or higher.

It must be easily accessible so that the appliance can

be quickly disconnected from the supply in an emer-

gency. It must be outside the area of the rear of the

appliance.

uCheck the electrical connection.

uPlug in the power plug.

4.7 Switching on the appliance

uPress the On/Off button

Fig. 3 (1)

wThe appliance is switched on. The temperature display and

Alarm symbol

Fig. 3 (7)

flash until the temperature is cold

enough.

5 Control

5.1 Brightness of the temperature

display

You can adjust the brightness of the temperature display to the

light conditions of the room in which the appliance is installed.

5.1.1 Adjusting the brightness

The backlight can either be switched off or set to one of 5

levels. The backlight is switched off ex works.

uTo activate the setting mode: Press the SuperFrost button

Fig. 3 (4)

for about 5 seconds.

wThe menu symbol

Fig. 3 (6)

shines and the child lock symbol

Fig. 3 (9)

flashes.

uPress the setting button

Fig. 3 (2)

to select the brightness

function.

wThe child lock symbol

Fig. 3 (9)

goes out and the brightness

symbol

Fig. 3 (8)

flashes.

uTo confirm: Briefly press the SuperFrost button

Fig. 3 (4)

wThe brightness symbol

Fig. 3 (8)

shines.

uUsing the setting button

Fig. 3 (2)

, select either "off" or the

brightness wanted. The more display fields of the tempera-

ture display that light up, the brighter it is. If no field is lit up, it

means "off".

uTo confirm: Press the SuperFrost button

Fig. 3 (4)

wThe brightness symbol

Fig. 3 (8)

flashes.

wThe brightness is adjusted to the new value.

uTo deactivate the setting mode: Press the On/Off button

Fig. 3 (1)

-or-

uWait for 5 minutes.

wThe brightness symbol

Fig. 3 (8)

and the menu symbol

Fig. 3 (6)

go out.

wThe temperature is indicated again in the temperature

display.

5.2 Child proofing

The child-proofing function enables you to make sure that the

appliance is not inadvertently switched off by children.

5.2.1 To activate child lock

uTo activate the setting mode: Press the SuperFrost button

Fig. 3 (4)

for about 5 seconds.

wThe menu symbol

Fig. 3 (6)

shines and the child lock symbol

Fig. 3 (9)

flashes.

uBriefly press the SuperFrost button

Fig. 3 (4)

to select the

child lock function.

wThe child lock symbol

Fig. 3 (9)

shines. The

-15 °C and -21 °C LEDs shine in the temperature

display.

uBriefly press the SuperFrost button

Fig. 3 (4)

to activate the

child lock.

wThe child lock symbol

Fig. 3 (9)

flashes. The -15 °C and

-21 °C LEDs go out.

uTo deactivate the setting mode: Press the On/Off button

Fig. 3 (1)

-or-

uWait for 5 minutes.

wThe menu symbol

Fig. 3 (6)

goes out and the temperature is

displayed again in the temperature display. The child lock

symbol

Fig. 3 (9)

shines.

5.2.2 To deactivate child lock

uTo activate the setting mode: Press the SuperFrost button

Fig. 3 (4)

for about 5 seconds.

wThe menu symbol

Fig. 3 (6)

shines and the child lock symbol

Fig. 3 (9)

flashes.

uBriefly press the SuperFrost button

Fig. 3 (4)

to select the

child lock function.

wThe child lock symbol

Fig. 3 (9)

shines. The

-18 °C LED shines in the temperature display.

uBriefly press the SuperFrost button

Fig. 3 (4)

to deactivate

the child lock.

wThe child lock symbol

Fig. 3 (9)

flashes.

uTo deactivate the setting mode: Press the On/Off button

Fig. 3 (1)

-or-

uWait for 5 minutes.

wThe menu symbol

Fig. 3 (6)

goes out and the temperature is

displayed again in the temperature display. The child lock

symbol

Fig. 3 (9)

no longer shines.

5.3 Temperature alarm

The temperature display and the alarm symbol

Fig. 3 (7)

flash

at the same time.

The Alarm symbol

Fig. 3 (7)

goes out and the temperature

display stops flashing, once the temperature has reached the

appropriate level of coldness again.

5.4Freezing products

The maximum load of frozen products for the drawers is 25 kg each

and for the shelves 35 kg each.

Control

CAUTION

Risk of injury due to broken glass!

Bottles and cans may burst when being

frozen. This applies particularly to sparkling fluids.

uDo not freeze bottles and cans containing fluids!

5.7Setting the temperature

The temperature can be changed continuously. Once the

-32 °C setting is reached, it starts again with -15 °C.

uTo access temperature adjustment: press setting button

Fig. 3 (2)

once.

wThe LED of the current temperature flashes in the tempera-

ture display.

uPress the setting button

Fig. 3 (2)

the number of times

needed until the required temperature shines in the LED

display.

Note

uLong pressing of the setting button sets a slightly colder

value within a small temperature range (e.g.: between

-15 °C and -18 °C). The LED of the next lower temperature

range then shines in the temperature display.

5.8SuperFrost

In addition, frozen product already in storage is given a "cold

reserve". The product stays frozen longer as a result when you

defrost the appliance.

You have to activate SuperFrost in good time, depending on

how many products are to be frozen: about 6 hours before

placing the products inside in case of small amounts and about 24

hours in advance in case of the maximum amount of products to be

frozen.

You do not have to activate SuperFrost in the following cases:

-when placing frozen goods in the freezer

5.8.1Freezing with SuperFrost

uBriefly press the SuperFrost button

Fig. 3 (4)

wThe SuperFrost symbol

Fig. 3 (5)

shines.

wThe freezer temperature drops, the appliance operates with

the maximum refrigerating capacity.

Note

uPressing the SuperFrost button can cause the compressor

to switch on up to 8 minutes later, thanks to the integrated

switch-on delay. This delay increases the service life of the

compressor.

In case of a small amount of products to be frozen:

uwait approx. 6 h.

uPlace wrapped products in the bottom drawers.

uwait about 24 h.

uRemove bottom drawer and place products directly in the

appliance so that it touches the base or sides.

wSuperFrost is automatically deactivated after about 65 h.

wTheSuperFrost button

Fig. 3 (5)

extinguishes once freezing

is completed.

wThe temperature range set for the normal mode shines in

the temperature display.

uPlace products in the drawer and then push the drawer back

in again.

wThe appliance continues to operate in the energy-saving,

normal mode.

To save energy SuperFrost can switch switched off, even

before the full 65 hours of freezing time has elapsed, by

pressing the SuperFrost button

Fig. 3 (4)

again. Only switch off

SuperFrost once the temperature is -18 °C or colder.

5.9Drawers

uTo store frozen products directly on the shelves: pull the drawer

forwards and lift it out.

5.10Shelves

uTo remove the shelf: lift up at the front

and pull out.

uTo put the shelf back: simply push in as

far as it will go.

Control

5.11 VarioSpace

Apart from being able to remove the

drawers, you can also remove the

shelves, creating space for large

items of frozen products.

uThe maximum load of frozen

goods for the drawers is 25 kgeach

and for the shelves 35 kg each.

6 Maintenance

6.1 Manual defrosting

The layer of frost or ice builds up faster if the appliance is

opened often.

However, a thick layer of ice will increase the appliance‘s

energy consumption. You should therefore defrost the appli-

ance regularly.

CAUTION

Risk of injury and damage as a result of hot steam!

uDo not use electric heaters or steam cleaners, naked flames

or defrosting sprays for defrosting.

uDo not remove ice using sharp instruments.

uSwitch on SuperFrost one day before defrosting.

wThe frozen goods are provided with a "cold reserve".

uSwitch off the appliance.

wThe temperature display goes out.

uPull out the power plug or switch off the fuse.

uIf possible, put the frozen goods in the freezer drawer,

wrapped in newspaper or a blanket, and store in a cool

place.

uPlace a pan with hot, not boiling

water on a middle shelf.

-or-

uHalf-fill the two lower drawers with

lukewarm water and put them in the

appliance.

wDefrosting is speeded up.

wDefrost water is collected in the drawers.

uLeave the door of the appliance open while defrosting.

uRemove detached pieces of ice.

uIf necessary, pick up defrost water several times, using a

sponge or cloth.

uClean the appliance (see 6.2) .

6.2 Cleaning the appliance

CAUTION

Risk of injury and damage as a result of hot steam!

Hot steam may damage the surfaces and cause burns.

uDo not use any steam cleaners!

NOTICE

Incorrect cleaning damages the appliance!

uDo not use cleaning agents in concentrated form.

uDo not use any scouring or abrasive sponges or steel wool.

uPlease do not use any aggressive, scouring, sand-,

chloride-, chemical- or acid-based cleaning agents.

uDo not use chemical solvents.

uDo not damage or remove the type plate on the inside of the

appliance. It is important for the customer service.

uDo not pull off, bend or damage cables or other compo-

nents.

uDo not allow any cleaning water to enter the drain channel,

ventilation grille or electrical parts.

uPlease use soft cleaning cloths and a universal pH-neutral

cleaning agent.

uPlease use cleaning and care products suitable for contact

with products in the appliance interior.

uEmpty appliance.

uPull out the power plug.

uClean plastic outer and inner surfaces with lukewarm

water and a little washing-up liquid.

After cleaning:

uWipe dry the appliance and items of equipment.

uConnect the appliance and switch it on again.

6.3 Customer service

First check whether you can correct the fault yourself by refer-

ence to the list (see Malfunction). If this is not the case, please

contact the customer service.

WARNING

Risk of injury if repair work is not carried out professionally!

uHave any repairs and action - not expressly specified - on

the appliance and mains cable carried out by service

personnel only. (see Maintenance)

uRead the appliance

designation and serial number off the type plate

located inside the

appliance on the left-

hand side.

uNotify the customer service, specifying the fault, appliance

designation

and serial No.

wThis will help us to provide you with a faster and more accu-

rate service.

uKeep the appliance closed until the customer service

arrives.

wThe goods will stay cool longer.

uPull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

7 Malfunction

Your appliance is designed and manufactured for a long life

span and reliable operation. If a malfunction nonetheless

occurs during operation, check whether it is due to a handling

error. In this case you will have to be charged for the costs

Maintenance

incurred, even during the warranty period. You may be able to

rectify the following faults yourself:

Appliance does not work.

→The appliance is not switched on.

uSwitch on the appliance.

→The power plug is not properly inserted in the wall socket.

uCheck power plug.

→The fuse of the wall socket is not in order.

uCheck fuse.

The compressor runs for a long time.

→The compressor switches to a low speed when little cold is

needed. Although the running time is increased as a result,

energy is saved.

uThis is normal in energy-saving models.

→SuperFrost is activated.

uThe compressor runs for longer in order to rapidly cool the

products. This is normal.

A LED on the bottom rear of the appliance (at the

compressor) flashes regularly every 15 seconds*.

→The inverter is equipped with a diagnostic LED.

uThe flashing is normal.

Excessive noise.

→Speed-controlled* compressors may produce varying

running noise due to different speed steps.

uThe sound is normal.

A bubbling and gurgling noise.

→This noise comes from the refrigerant flowing in the refriger-

ation circuit.

uThe sound is normal.

A quiet clicking noise.

→The noise is produced whenever the refrigeration unit

(motor) automatically switches on or off.

uThe sound is normal.

A hum. It is briefly a little louder when the refrigeration

unit (the motor) switches on.

→The refrigeration increases automatically when the Super-

Frost, function is activated, products have just been placed

in the appliance or the door has been left open for a while.

uThe sound is normal.

→The ambient temperature is too high.

uSolution: (see 1.2)

Vibratory noise.

→The appliance is not standing firmly on the floor. As a result,

adjoining units or objects are set into vibration by the

running refrigeration unit.

uMove the appliance away a little and align it using the

adjustable feet.

The SuperFrost symbol

Fig. 3 (5)

flashes together with the

temperature display.

→There is a fault.

uContact the after sales service. (see Maintenance).

DEMO shines in the temperature display.

→The demo mode is activated.

uContact the customer service. (see Maintenance).

The outside surfaces of the appliance are warm.

→The heat of the refrigeration circuit is used to prevent

condensate from forming.

uThis is normal.

The temperature is not cold enough.

→The door of the appliance is not properly closed.

uClose the door of the appliance.

→Insufficient ventilation.

uClear ventilation grilles.

→The ambient temperature is too high.

uSolution: (see 1.2) .

→The appliance was opened too frequently or for too long.

uWait until the appliance reaches the required temperature

itself. If not, contact the customer service. (see Mainte-

nance).

→Too much products were placed inside without SuperFrost.

uSolution: (see 5.8)

→The temperature is incorrectly set.

uSet to a colder temperature and check after 24 h.

→The appliance is too close to a heat source.

uSolution: (see Putting into operation).

8 Decommissioning

8.1 Switching off the appliance

uPress On/Off button

Fig. 3 (1)

for about 2 seconds.

wThe temperature display is dark.

8.2 Taking the appliance out of service

uEmpty the appliance.

uPull out the power plug.

uClean the appliance (see 6.2) .

uLeave the door open to prevent odour.

9 Disposing of the appliance

The appliance contains some reusable materials

and should be disposed of properly - not simply

with unsorted household refuse. Appliances which

are no longer needed must be disposed of in a

professional and appropriate way, in accordance

with the current local regulations and laws.

When disposing of the appliance, ensure that the refrigeration

circuit is not damaged to prevent uncontrolled escape of the

refrigerant it contains (data on type plate) and oil.

uDisable the appliance.

uPull out the plug.

uCut through the connecting cable.

Decommissioning

Indice

Altri manuali FIOCCHETTI Congelatore

FIOCCHETTI

FIOCCHETTI ULTRAFREEZER Guida utente

FIOCCHETTI

FIOCCHETTI ECT-F TOUCH Istruzioni operative

Manuali Congelatore popolari di altre marche

Siemens

Siemens GU..D SERIES Manuale utente

Omcan

Omcan FR-CN-0155 Manuale utente

Beko

Beko FNE290E24W Manuale utente

Electrolux

Electrolux ARCTIS G 8 60 50-6I Manuale utente

Electrolux

Electrolux EUF2042AOX Manuale utente

Dometic

Dometic CoolFreeze CFX95DZ Manuale utente

Electrolux

Electrolux EUF7000W1 Manuale utente

Polar Electro

Polar Electro CT330 Manuale utente

MPM

MPM MPM-145-SK Series Manuale utente

SAF

SAF PRESTOTIG 200AC/DC Guida rapida

Zanussi

Zanussi ZFT11407WA Manuale utente

AEG

AEG A63190GT Manuale utente

AEG

AEG A81000TNW0 Manuale utente

Matsui

Matsui MUC50S15E Manuale utente

NEFF

NEFF G4344X8 Manuale utente

Frigidaire

Frigidaire FV 1246 H Manuale utente

Frigidaire

Frigidaire FFC13K1AW Manuale utente

Electrolux

Electrolux EU 2400C Manuale utente