fios Verizon G3100 Manuale utente
Fios
Home
Router
Action required
Download andinstall the My
Fios app for personalized
setup instructions.
Don’t have internet
access? Use the installation
instructions inside.
If the light is red or flashing red,
Verizon support is needed.
For installationhelp, use
the My Fios app or visit
verizon.com/routersupport.
Troubleshooting
©2019 Verizon. All rights reserved.
FIOS HOME ROUTER
INSTALL GUIDE
09-19
0% 5% 25% 50% 75% 95% 100%
DigiCode Data File
ACCOUNT : 8631402 ROUNDHOUSE MARKETING SERVICES
ORDERED BY : LYNN MAIER
P.O. NUMBER : VER10882
INVOICE NO. : 1593740
(PC EPS via EMAIL)
Created on 6-27-19 at 9:59:50
by
SYMBOLOGY, INC.
Maple Grove, Minnesota, 55369
763-315-8080
NOTICE:
This DigiCode file is considered original artwork.
It must be inspected and approved by the purchaser.
Use of this file confirms acceptance.
See the back of the Symbology invoice for Limitation of Warranty
11367280
NBAR .0075 RATIO 3.00 BWA -0.0020
FIOS HOME ROUTE INSTALL GUIDE
6/27/2019 9:59:50 AM
1593740/1-234-1ROUNDHOUSE MARKE
Encode: *11367280* PU
11367281
NBAR .0075 RATIO 3.00 BWA -0.0020
FIOS HOME WIFI EXTENDER INSTALL GUIDE
6/27/2019 9:59:50 AM
1593740/1-234-2ROUNDHOUSE MARKE
Encode: *11367281* PU
Includes:
Fios Home Router
( 1 ) Power adapter
( 1 ) Ethernet cable
( 1 ) Coax cables ( 2 )
Coax splitter ( 1 )
2. Connect your devices
Wired or Wi-Fi? Your choice.
Wired
A. Connect the Ethernet cable to any yellow LAN port
on your router.
B. Connect the other end to your computer.
Wi-Fi
A. Get the Wi-Fi name and password o the label on your router.
B. On your device, choose your Wi-Fi name when it appears.
C. Enter the Wi-Fi password exactly as it appears on your router label.
Note: The Fios Home Router has one Wi-Fi name that supports
both 2.4GHz and 5GHz signals. The Self-Organizing Network
(SON) feature allows your devices to move between the two
signals automatically for an optimized Wi-Fi connection.
3. Activate your router
Open an internet browser and follow the prompts.
1. Connect your cables
A. Connect the coax cable from the coax
port on your router to a coax outlet.
B. If you ordered internet speeds greater
than 100 Mbps, connect the Ethernet
cable from the WAN port on your router
to an Ethernet outlet.
C. Connect the power cord from the router
to an electrical outlet.
D. Router will take up to 10 minutes to power
up completely. Move on when the front light
is solid white.
Note: If home is wired Ethernet, follow same
steps as above using an Ethernet cable instead
of a coax cable.
Installation instructions
Indice
Altri manuali fios Router di rete
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza