©Fire Cam 2015 8
Docking Station (optional)
The docking station is a high-speed charger with two
charging slots for Oncall camera batteries. Standard
size and XL batteries can both be charged.
The battery can be charged while connected to the
camera or separate from the camera as pictured.
Best practice is to dock the camera and battery while
you are downloading files to the PC via USB cable.
To dock the camera / battery:
- First, connect the dock to power using the
supplied power supply and USB cable
- Ensure the charging connector on the base of
the battery is aligned with the connector in the
bottom of the slot.
- Press the camera/battery down until it clicks
into place.
The dock will automatically stop charging when the
battery is fully charged.
NOTE: use only the supplied power supply and cable.
Using a non-approved power supply or cable may
damage the charging dock and/or the Oncall Camera
and void the manufacturer’s warranty.
Powering on and off the Camera
Power the camera on by pressing the Power Button
once. After a brief pause the camera will turn on with a
beep, vibrate, and the power indicator light will turn
green.
To Power off the camera press and hold the power
button for 3 seconds.
Recording Video
Press Video Record button once to start recording
Video Recording on is indicated by:
- Video indicator light will flash red
-Asin
le bee
-Onelon
vibration
To stop video recording:
Press and hold video button for 3 seconds.
Video Recording stopped is indicated by:
- Indicator li
ht sto
sflashin
- 2 short bee
s
- 2 short vibrations
