The Rear View
1) Power Port 6) ether1 (RJ45) Management 1 Port
2) Serial Console Port 7) ether2 (RJ45) Management 2 Port
3) IPMI/Serial over Ethernet Port 8) Video Port
4) USB 2.0 Ports 9) Disabled Port
5) USB 3.0 Ports 10) Disabled Port
Power Port
lPower: Connect your power source to this port to provide power to the appliance.
The appliance comes with one redundant power supply unit for use if the primary
unit fails.
I/O Ports
lVideo: Connect a monitor to this port to view the appliance's command-line
interface.
lUSB 2.0: These ports are USB 2.0 compliant.
lUSB 3.0: These ports are USB 3.0 compliant.
lSerial Console: Connect to this port to manage the appliance from your terminal.
Management Ports
lether (RJ45): Connect your LAN to this port to enable remote access to the CLI and
Web UI. The RJ45 connector is a 10/100/1000BASE-T port.
lIPMI: Connect for access to out-of-band management functions, including power
control, console redirection, and appliance health status. The connector is a
100BASE-T port.
Disabled Ports
These ports are disabled by design.
Endpoint Security Hardware Administration Guide CHAPTER 1: The HX 4502
8 ©2019 FireEye
